Re: The 1960 - 1966 Chevrolet & GMC Pickups Factory Correct Restoration Thread
Quote:
|
Re: The 1960 - 1966 Chevrolet & GMC Pickups Factory Correct Restoration Thread
1 Attachment(s)
When I cleaned up the coil I found the original sticker under the bracket to be in good shape. I cleaned and painted around the sticker and lifted the coil out of the bracket an inch so that it was visible
|
Re: The 1960 - 1966 Chevrolet & GMC Pickups Factory Correct Restoration Thread
Echlin ic64 is a napa replacement.
|
Re: The 1960 - 1966 Chevrolet & GMC Pickups Factory Correct Restoration Thread
Quote:
|
Re: The 1960 - 1966 Chevrolet & GMC Pickups Factory Correct Restoration Thread
Hi. Im new to this and I purchased a 1961 Chevy pickup. I was wondering if anyone knows how to tell if the truck is either a C10 or an Apache? I looked on the actual title and I did a VIN search and it only states 1961 Chevy PU. Any help would be greatly appreciated.
|
Re: The 1960 - 1966 Chevrolet & GMC Pickups Factory Correct Restoration Thread
5 Attachment(s)
Hi. Does anyone happen to know if this truck is a C10 or an Apache? The title only says 1961 Chevy PU. Any help would be greatly appreciated.
|
Re: The 1960 - 1966 Chevrolet & GMC Pickups Factory Correct Restoration Thread
5 Attachment(s)
Some interior pics of my truck I am restoring.
|
Re: The 1960 - 1966 Chevrolet & GMC Pickups Factory Correct Restoration Thread
1 Attachment(s)
One more of the wheel I just finished.
|
Re: The 1960 - 1966 Chevrolet & GMC Pickups Factory Correct Restoration Thread
Quote:
|
Re: The 1960 - 1966 Chevrolet & GMC Pickups Factory Correct Restoration Thread
Quote:
|
Re: The 1960 - 1966 Chevrolet & GMC Pickups Factory Correct Restoration Thread
Quote:
|
Re: The 1960 - 1966 Chevrolet & GMC Pickups Factory Correct Restoration Thread
Quote:
|
Re: The 1960 - 1966 Chevrolet & GMC Pickups Factory Correct Restoration Thread
Quote:
|
Re: The 1960 - 1966 Chevrolet & GMC Pickups Factory Correct Restoration Thread
Quote:
|
Re: The 1960 - 1966 Chevrolet & GMC Pickups Factory Correct Restoration Thread
2 Attachment(s)
I had to send my repop heater core out and get the tank swapped. The lines coming out were at wrong angle and to short. On the positive side it now has a GM part# on the core.
|
Re: The 1960 - 1966 Chevrolet & GMC Pickups Factory Correct Restoration Thread
Do you have a source for the tubing braces. I need a set.
|
Re: The 1960 - 1966 Chevrolet & GMC Pickups Factory Correct Restoration Thread
1 Attachment(s)
Had a little bit of a setback, didn't realize that someone back in the day decided to screw the voltage reg to the inner fender. I ended up welding up the holes and putting it back where it belongs.
|
Re: The 1960 - 1966 Chevrolet & GMC Pickups Factory Correct Restoration Thread
4 Attachment(s)
What is the Shape of the Leaf Springs Ends
Shape of leaf spring ends, photos below are of 1964 K10 built in St Louis, rear springs. Were the leaf spring ends cut square or were they rounded/tapered some. They could have been both ways depending on supplier and/or where the truck was made. The last photo shows other rear spring parts. Note: The bottom helper spring does not look original, in photos 1 and 2 below. Will post photos of front springs next, they are not as rounded, however, not cut square either. Les |
Re: The 1960 - 1966 Chevrolet & GMC Pickups Factory Correct Restoration Thread
1 Attachment(s)
Front Spring End Shape '64 K10
Below are photos of front spring end shape, they are cut straight at ends and have a straight taper on the sides length wise at the spring end. This makes the end of the spring narrower. |
Re: The 1960 - 1966 Chevrolet & GMC Pickups Factory Correct Restoration Thread
Anyone know if these snaps came on these trucks?? Or why someone would go crazy adding them? http://i163.photobucket.com/albums/t...oads/image.jpg
|
Re: The 1960 - 1966 Chevrolet & GMC Pickups Factory Correct Restoration Thread
Quote:
They are not factory. Greg. |
Re: The 1960 - 1966 Chevrolet & GMC Pickups Factory Correct Restoration Thread
Did this truck have a camper on it??
|
Re: The 1960 - 1966 Chevrolet & GMC Pickups Factory Correct Restoration Thread
Not when I got it but who knows??
|
Re: The 1960 - 1966 Chevrolet & GMC Pickups Factory Correct Restoration Thread
1 Attachment(s)
Ok can any body tell me if this is a stock paint scheme. 1966 Base model fawn interior brown dash and grey glove box ashtray and radio delete.
Going through the truck and wondering how to paint the interior. Thanks |
Re: The 1960 - 1966 Chevrolet & GMC Pickups Factory Correct Restoration Thread
Don't know about the gray but dark fawn dash is correct for 66.
|
All times are GMT -4. The time now is 09:49 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com