Re: ls turbo build
Yes..comp 54-000-11.....557/.562 @114... recommended from Texas speed
|
Re: ls turbo build
It should put down some power for sure! How must boost do you plan on running?
|
Re: ls turbo build
Quote:
|
Re: ls turbo build
He should meet his 800whp goal at about 18psi
|
Re: ls turbo build
On the street with pump gas around 10-12 lbs is what I'm thinking...track on e85 I'm not sure yet?:)
|
Re: ls turbo build
Anyone have any coating recommendations here In Oklahoma? Need to either coat all the hotside or wrap....depends on costs.. may leave the headers alone
|
Re: ls turbo build
Looking good. I like the aluminum downpipe. Glad I did mine that way too.
|
Re: ls turbo build
What's the reason for doing aluminum versus mild/stainless steel on the downpipe?
|
Re: ls turbo build
Quote:
|
Re: ls turbo build
Save a little bit on weight...
|
Re: ls turbo build
Looks good.
I'd run the DP further back or out the side, you're going to hate the drone. What heads are on the motor? FWIW, mine made ~650 on 8#. |
Re: ls turbo build
2 Attachment(s)
It has a little bit of an angle facing down and out... if it's to loud I'll put a muffler on it...has 706 heads that have been worked.. kind of went overboard on everything for a bigger and better 427 ls for later.. here's a few picts with most of the ac stuff done..I'm getting close..still need some new valve covers, wires and a few small things..
|
Re: ls turbo build
1 Attachment(s)
Had to move dryer because of inner cooler.. but everything fits very nice...
|
Re: ls turbo build
Quote:
Quote:
|
Re: ls turbo build
Quote:
|
Re: ls turbo build
3 Attachment(s)
Thanks..I'll get some better pics when I pull the turbo off to wrap the hotside..
|
Re: ls turbo build
Quote:
|
Re: ls turbo build
69trk that is a nice looking truck. Just seen you live in bridgecreek I also live in bridgecreek. I'm building a twin turbo 70 swb now. But have a long way to go. Do you ever take it to the car shows in tri city when they have them?
|
Re: ls turbo build
Quote:
|
Re: ls turbo build
Quote:
|
Re: ls turbo build
Quote:
|
Re: ls turbo build
Very nice progress on the engine. Looking forward to hearing this puppy this year....hopefully.... :)
|
Re: ls turbo build
Nothing to much to see yet but when i get something to look at i will let you know. Haha. I dropped the motor and transmission in for fitment and set the cab back on it so I can figure out where to mount the computer. Got the wiring harness all broken apart to build my own.. once that gets done then the frame goes for sand blasting and powered coating. Got rust to fix on the cab . I like the way your truck looks tho. .
|
Re: ls turbo build
1 Attachment(s)
Wrapped the down pipe and some of the hotside...also finished all the ac stuff....need valve covers, wires, turbo blanket, finish up the plumbing on the wastegates and 10an drain for the turbo..
|
Re: ls turbo build
Looks good. Nice clean work. Can't wait to get to that stage..
|
All times are GMT -4. The time now is 10:54 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com