![]() |
Re: How many 2wd Blazer do we have?
THATS ALREADY LOOKING GOOD MAN....
Posted via Mobile Device |
Re: How many 2wd Blazer do we have?
Quote:
|
Re: How many 2wd Blazer do we have?
1 Attachment(s)
Found this one on CL asking $6500.00 I'm looking for a 2wd but I think he's asking too much, stock 350, nice red interior, original paint.
|
Re: How many 2wd Blazer do we have?
Quote:
|
Re: How many 2wd Blazer do we have?
I'd seriously consider it, but must finish and sell my '77 c10.
It's only too much because I don't have the $. Here's the link http://portland.craigslist.org/mlt/cto/3110865985.html |
Re: How many 2wd Blazer do we have?
Quote:
|
Re: How many 2wd Blazer do we have?
ttt
|
Re: How many 2wd Blazer do we have?
I just bought a 77 GMC 2wd blazer ....project , but shouldnt be horrible , no pics at this moment but I will see what I can come up with. Has anyone done a flip kit on one of these....? Does it have to be notched....?
|
Re: How many 2wd Blazer do we have?
If you do a flip kit you will want a notch.
Posted via Mobile Device |
Re: How many 2wd Blazer do we have?
Quote:
Posted via Mobile Device Posted via Mobile Device |
Re: How many 2wd Blazer do we have?
Quote:
|
Re: How many 2wd Blazer do we have?
Quote:
|
Re: How many 2wd Blazer do we have?
I bought this one yesterday. All stock (except for the motor was replaced in 97') from the original owner and in great shape. Will make a good family truck. I plan to lower it some, probably add 20's and drive it for a really long time : )
http://i1099.photobucket.com/albums/...ic1-1block.jpg http://i1099.photobucket.com/albums/...azerintpic.jpg |
Re: How many 2wd Blazer do we have?
Nice looking blazer
|
Re: How many 2wd Blazer do we have?
Quote:
Quote:
|
Re: How many 2wd Blazer do we have?
1 Attachment(s)
Quote:
Quote:
Quote:
Quote:
Quote:
I am not saying a C-notch kit isn't a good idea, but it might not be required. |
Re: How many 2wd Blazer do we have?
Quote:
Your blazer looks awesome btw. Posted via Mobile Device |
Re: How many 2wd Blazer do we have?
Quote:
I answered no because I have an axle flip AND I do not have a c-notch and it works just fine (its my daily-driver too). It all depends on his rear springs if they are already sagging from age and/or if they have been replaced with a higher spring rate spring pack, yet the ride height was unchanged. |
Re: How many 2wd Blazer do we have?
You also don't have stock springs. It's like comparing apples to oranges. I'm not trying to argue either, but I guarantee if you flip the axle on a blazer with stock springs you will need a notch. Which is what he asked.
Just would hate for someone to go to the trouble to do a flip kit thinking that he could use it without a notch, then have to change more parts to get it to a point where it would work. Posted via Mobile Device |
Re: How many 2wd Blazer do we have?
Not only that but if your springs are 4" longer than that will give you more of a arch than a smaller spring which will be flatter thus closer to the frame rails.
Even with a notch my axle tube hits frame rails on a decent bump.. That is another reason why I'm in the process of getting parts to bag the truck. I need a larger notch and since I need to cut th e floor anyways might as well go all the way.. |
Re: How many 2wd Blazer do we have?
Quote:
The only advantage in my case for the longer top spring is a little more stiffness while actaully providing a better ride quality which is why GM switched ALL full size trucks to a rear 56" top spring with the new body style in '88 ('92 on K5/Burbs). Posted via Mobile Device |
Re: How many 2wd Blazer do we have?
A longer spring generally will lift the truck because the shackle has to rotate back further. Causing the pivot to be lower in relation to the frame. Causing the truck to sit higher.
Posted via Mobile Device |
Re: How many 2wd Blazer do we have?
Quote:
This isn't my first rodeo. Posted via Mobile Device |
Re: How many 2wd Blazer do we have?
You are correct. I did miss that. But that even furthermore enforces th point I was trying to make. Your blazer is nothing like his. Different length springs and relocated hangers.
And it isn't my first rodeo either I've had 10 square body 2wd blazers. 6 of those had flip kits, so in response to the question that was asked, Yes you will need a notch.......unless you want to change a bunch of stufff, in which case you may not need it. But if you put on a 6" suspension lift you won't need one either, but that wasn't the question was it? Posted via Mobile Device |
Re: How many 2wd Blazer do we have?
ok, i have a 78 2wd blz and i pulled 2 leafs. it gave me 4 inches of drop and put me on the bump stops. i took the bumpstops out and i have 2 1/2 inches before i hit frame. if a flip gives you 5 inches of drop then that would leave 1 1/2 inches. now that may be enough clearance to drive it IF the shocks have been addressed angle wise and shorter shocks (like putting front shocks in the rear) were put in...and deal with an occasional bottom out and hit to the frame. if you have nicer roads in your area then this would cause you to think you dont need a c-notch.
if you havent addressed the shock issue, there is no way it's not going to hit as your leafsprings are going to bounce so much that it will touch on big bumps. to the guy who is asking....do the flip and install some extenders with stock front shocks and you might be ok, but make sure you can do the c-notch install if you need to later, cause chances are you'll end up wanting one. |
All times are GMT -4. The time now is 03:59 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com