Re: Project "Schrum" 1959 Gmc 100
Dude your physically moving distributor is prolly just needing the timing adjustment/clamp down bolt tightened. Happens just look on the side of the dizzy at the base where it goes into the engine you'll find a clamp with a bolt keeping it from moving.
BTW don't worry about an alternator when the truck isn't even running correct like you said backfiring an what not. You'll beat yourself for buying a new alternator when you coulda used that money to fix the engine to run better. Fix one project at a time rather than go all over the place. It'll get outta hand seriously. |
Re: Project "Schrum" 1959 Gmc 100
Quote:
it is physically impossible to move a properly installed distributor without loosening the clamp that's why everyone is asking more questions about what is moving if you don't want or can't understand the advise posted here ask another pertinent question you sound like a three year old repeating ''i can't'' over and over |
Re: Project "Schrum" 1959 Gmc 100
you killing man really you are. when I get home tonight I will post a pic of my bracket its the one I posted plain and simple. don't buy anything till I post mine. you can buy the bracket at most auto parts stores
|
Re: Project "Schrum" 1959 Gmc 100
Quote:
|
Re: Project "Schrum" 1959 Gmc 100
Anyway Lowriderchevy, I appreciate your offer. I don't care to have Mr.Gasket products and I assume the V8 and I6 brackets are different ??? Sure they are..
|
Re: Project "Schrum" 1959 Gmc 100
Quote:
Quote:
This is my project build please,please don't start drama on this ..Thanks!!! I will revise my words better next time ..Thanks !! lowrider thanks for your offer on the HEI, but I will have to pass |
Re: Project "Schrum" 1959 Gmc 100
Its cool no drama here ill choose my words better next time what I meant by a pic helping is you'd see the part we are revering to
|
Re: Project "Schrum" 1959 Gmc 100
Quote:
|
Re: Project "Schrum" 1959 Gmc 100
Thanks, post a photo of it. I tried getting one out of a junkyard but I couldn't get the bolt that goes into the engine block to come out
Can anyone give me the actual tire size on the stock rims? Thanks |
Re: Project "Schrum" 1959 Gmc 100
1 Attachment(s)
Use my phone for pix took the best that I could the engine was hot since I've been driving her so here is the distributor clamp we are all thinking that may be loose
Attachment 1300157 |
Re: Project "Schrum" 1959 Gmc 100
5 Attachment(s)
And alternator bracket pix tight fit so excuse the not so good pix and i drive my car alot so pay no mind to the oil grime
Attachment 1300165 Attachment 1300166 Attachment 1300167 Attachment 1300168 Attachment 1300169 |
Re: Project "Schrum" 1959 Gmc 100
Didn't know till today I could post pix from my phone super excite won't have to email to my computer then download save then go to website and add them there
|
Re: Project "Schrum" 1959 Gmc 100
Wait a minute...you mean cell phones can take pictures now to? LOL
Rob |
Re: Project "Schrum" 1959 Gmc 100
How does that last one bolt to the alternator?
I haven't really touched my truck since the incident with the distributor, as much as I'd like to I know nothing about anything on how to fix it other than putting another distributor in the truck and see how that works out I am going to be in an local online newspaper for my truck, pretty excited |
Re: Project "Schrum" 1959 Gmc 100
Lower bracket has 2 bolts that go into the block then one long one to hold the alternator
|
Re: Project "Schrum" 1959 Gmc 100
1 Attachment(s)
Here is a photo of mine, I know its a SB with a manifold mount, but wanted to show how you can use a simple piece of flat stock to align the stock bracket with an alternator to the pulleys if you cannot get enough adjustment with shims, etc on the stock one. May as well use what you have, even a lot of aftermarket ones will need modified to work.
|
Re: Project "Schrum" 1959 Gmc 100
I'll see what I can do with it
I still haven't even touched the dreadful truck since the issue |
Re: Project "Schrum" 1959 Gmc 100
I've saved up a good bit of money now
I'm going to have a lot done to the truck Getting two of my rims repainted Buying patch panels to get welded on my truck Front bed panel Misc things |
Re: Project "Schrum" 1959 Gmc 100
2 Attachment(s)
Before and After of my '59's rims
|
Re: Project "Schrum" 1959 Gmc 100
Nice color :)
|
Re: Project "Schrum" 1959 Gmc 100
Looks great!
|
Re: Project "Schrum" 1959 Gmc 100
They came out real nice.
Kim |
Re: Project "Schrum" 1959 Gmc 100
Thanks everyone, it is a little darker than it looks in the photo. It matches the trucks original color though
|
Re: Project "Schrum" 1959 Gmc 100
Update on things I've bought
-Another step -Another Cab corner -Replacement Hood emblem -Alternator wiring -Petronix ignition kit |
Re: Project "Schrum" 1959 Gmc 100
1 Attachment(s)
Finally got a tire on the re-painted on the tire
|
All times are GMT -4. The time now is 10:01 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com