![]() |
Re: NV4500 swap is underway
Holy crap!
|
Re: NV4500 swap is underway
Quote:
Status on the camper…. Mine is next in line for completion after this Raptor! Got to have big blue ready to roll back to Denver the week of the 14th to pick it up! Mine will fit inside the bed like this where the tailgate will shut. http://i1119.photobucket.com/albums/...orand10030.jpg I spec’d a much smaller side window though for fear the big one would easily get broken. http://i1119.photobucket.com/albums/...orand10036.jpg |
Re: NV4500 swap is underway
Was going to ask if you had seen those photos. I guess so. You painting your's blue? Inside toilet or no? You won't know yourself this summer with all the upgrades!
|
Re: NV4500 swap is underway
Quote:
You’re right! We are going to be camping in style this summer and won’t even know how to rough it anymore. :lol: Here are a couple sneak peeks at mine. http://farm6.static.flickr.com/5013/...cfcf7d09_z.jpg Rounded corners above the cab instead of squared off edges. http://farm6.static.flickr.com/5258/...eb512d9c_z.jpg National Luna Weekender 52 Liter Fridge/Freezer http://www.equipt1.com/rendition.pro...S/IMG_5105.jpg If you remember the Turtle Expedition II truck from the old articles in FOUR WHEELER (back when they actually had articles worth reading). Well, that was my dream truck when I was a kid which you can kind of tell http://farm6.static.flickr.com/5050/...c23abc31c2.jpg |
Re: NV4500 swap is underway
Sweet. Can't wait to see the finished camper!
|
Re: NV4500 swap is underway
Now you say about the Rhino lining colour I remember you mentioning that before. Sorry, shoulda looked back through. Pictures look good. I like how you've curved the front corners. To be honest I don't like the shape of the front they are putting on. It's certainly going to be slick when it's done.
Cassette toilet's are meant to be good, and the 12 volt fridge will be great. Pointless setting up with a mains powered/three way fridge when you are going to be set up for the 12 volt, and there ain't no mains where you go anyway! Oh, (zero stress, just sayin) the 'Outback' is Lara's domain (the land of Oz), we're just the little dot in the bottom right hand corner. Over here you drive too far in one direction you quickly end up in the Pacific. Have you seen these - http://www.frolisleepsystems.com/index.htm ? Meant to be pretty slick. Saves the mattress sweating as well. |
Re: NV4500 swap is underway
Billhilly,
I hear you on cassette toilets being they are meant to be good, but the reality they really aren’t worth a s#!t…but better than nothing. Chances are this one will never get used unless by some far off chance the boss actually goes with me on a trip. I know where you are at and the Outback isn’t exactly in your back yard but it is much closer to you than us. :lol: We got the tcase but back together today but didn’t have time to install it in the truck yet. Hopefully, tomorrow I’ll get it bolted in and go for a test drive. Also got the ’68 GMC going today after a 5 year hiatus sitting the corner of the shop. Zoomad75 stopped by this afternoon just in time to help get it fired up. Had to get it running as it is getting relocated to the front garage as the blue topper that is coming off is getting moved into the corner where the ’68 has been sitting. Got to make room for the new addition coming home! Speaking of that….here are a few more baby pictures of the Phoenix http://farm6.static.flickr.com/5217/...788a53e7_b.jpg http://farm6.static.flickr.com/5258/...607c0224_b.jpg This is my buddies sweet Ram Charger. If you look closely you can tell this Ram Charger and my K10 are built by the same two guys.... the two trucks have a lot in common. He just finished up reworking his rear bumper this week to add a basket for Scepter cans. This Ram Charger is awesome. ¾ ton drivetrain, ARB’s air lockers front and rear, 12,000lb Warn winch, on-board air and many other goodies. The only thing it is lacking is power....the 5.2L is a bit underpowered and will eventually get replaced with something more substantial. He will be reworking my rear bumper shortly to add a tire mount and fuel can basket as well. It will look just like his for the most part. The plan is for us NOT to pull the off-road trailer anymore when we go on our long distance adventures. The trailer gets to be a hassle on tight trails. http://farm6.static.flickr.com/5260/...7db40c4c_b.jpg http://farm6.static.flickr.com/5172/...7a849219_b.jpg http://farm6.static.flickr.com/5137/...39c95a8e_b.jpg |
Re: NV4500 swap is underway
Man, I would love to have a glass top like yours, and you are taking yours off. haha.
|
Re: NV4500 swap is underway
Quote:
It was pretty funny to walk into the shop this afternoon and hear a 396 waking up from a 5 year coma. It took a little coaxing but the vintage rat sounded better than it did the last time I saw it move. That was when we both were serving our tour of duty in Detroit and we were throwing our normal block party for the Woodward Dream Cruise. (beer, burnouts and burgers not in that order!) I'm bummed the snow run for tomorrow got nixed but I'd rather see the beast back in operational form for the run to pick up the K10Casa next week. Besides my customer's from the Westcliffe area say there's only snow accumulation in the trees. Pretty dry and windy up there for weeks. Just give me a shout tomorrow if you need a hand taking the lid off the truck. |
Re: NV4500 swap is underway
Dirty Larry,
hello from a bit west and a bit south. just wanted to say that you have a clean truck and i love the build plan. i have done the 4500 swap a few times, most recently on my M715. i was reading this thread and laughing about how you were having trouble finding the round pattern 205. i had the same issue when i was putting the jeep together. i waited and waited and finally found one on ebay. it was $250 but i had to ship it from Maine... then of course, days after getting the case from maine i found and bought an 86 K30 parts truck with the same case in it. anyhow, if you are in the san juans for some wheeling you will have to let me know. we try to get up in the high country as much as possible once the snow is gone. Ryan |
Re: NV4500 swap is underway
Altec,
Don’t worry… I am only taking it off to replace it with something better that has more room. I thought about selling the topper but it seems that everybody on the classified section of this board and Craigslist peeps think all used toppers should go for $300. Ah, that ain’t happen ‘in with my topper that was over $2500 just 4 years ago so I’ll just keep it. ;) Thanks ryanroo, I might be interested in that round pattern 205 if you want to get rid of it. If this NV4500 shoots craps I’ll probably go after a reman unit that I would be nervous about cutting the mainshaft like I did on this AA kit for fear it would void the trans warranty. If things come to that someday, I think I’ll go to a round 205 or a 32 spline NP241. That all said, I am keeping my @y@s open for a round 205 or 32 spline 241 just to have around in case. :lol: The good news is the tcase repair did correct about 80% of the noise. I can actually hear the radio while doing 75 MPH now! I think the remaining noise is typical high mileage NV4500 noise. I can live with this. Also found there is a very small trans leak coming from somewhere up high, possibly the trans cover or shift tower. Got to check into that after I make the trip back to Denver to get the camper next week. I’ll start a thread on the Phoenix soon. |
Re: NV4500 swap is underway
If I wasn't a broke butt wiper, I'd be more then willing to pay $2500 for one of those tops. Best looking one that was made. At least, that I have seen.
I'm considering trying to find a soft topper. Since I would kill myself trying to pickup a glass top by myself, plus storing the glass top would be a pain for me I thing canvas is the way to go. Just having trouble finding good soft options... |
Re: NV4500 swap is underway
I know round pattern 205s are getting hard to come by..this might be an alternative if you cant locate one. http://www.northwestfab.com/tcaseadapters.html
|
Re: NV4500 swap is underway
Quote:
|
Re: NV4500 swap is underway
I just stumbled across this thread when I googled "Chevrolet nv4500" It is a great thread with a lot of useful info. My rig is a 70 chevy K20 that I plan on doing the nv4500 swap into. My truck is 99% street driven, and from time to time used as a tow rig for my drag car. As far as using the NP 205 with the coarse 10 spline output shaft in my application, does anyone really forsee any problems, other than some slop in the coupling? Or would trying to find a 27 spline 205 really benefit me?
|
Re: NV4500 swap is underway
Larry, just parused the whole thread, looks like you have a mighty fine truck coming togeather.
I did not see if you used the dodge or the GM tranny, but the dodge NV4500 had issues with the 5th gear nut backing off, and the gear failing. They would get noisy first and then going down the road 5th gear will just stop working. |
Re: NV4500 swap is underway
Quote:
|
Re: NV4500 swap is underway
70custom20,
I don’t foresee any problem using a 10 spline 205 with an Advance Adapter NV4500 kit. Except, as you mentioned, a good deal of driveline slop is typical with 10 spline adapters. I sold my 10 spline 205 and went with a 27 spline 205 to help get more spline counts in the coupler for that reason. I would have rather had a newer round pattern 32 spline 205 with a less intrusive AA NV4500 kit but I couldn’t find a round 205. Sometimes I wish I would have just settled on a 32 spline NP241 until a 32 spline round 205 popped up especially after having to rip the 27 spline 205 out after 300 miles to replace a cog. BTW.....welcome to the best GM truck site on the internet! GM and Dodge both had the 5th gear nut issues. The vibration of the diesels made the condition worse and being most Dodges are diesels made it appear it was more of a Dodge issue. The reality it is an issue across the board for all NV4500’s sooner or later. The NV4500 I am using is a 1998 K3500 trans from behind a 7.4L that the nut had just started to back off where the coupler between 5th gear and the actual nut was starting to spin around. That said, I don’t think the 5th gear issue was corrected in 1996. In fact, I don’t think it was ever completely resolved. |
Re: NV4500 swap is underway
Keep in mind also that by using the AA 27 spline kit, the nut is eliminated anyway. It's replaced with a bolt on collar installed after the last 4" (APPROX) of the tail shaft is cut off. I don't see that collar backing off at all unlike the stock nut.
|
Re: NV4500 swap is underway
Yeah, that is one neat thing about the 27 spline to NV4500 AA kit. The nut goes adios while the transmission tailshaft housing to tcase connection holds the entire contraption together and 5th gear in place. In time, we’ll see how good that works out in the real world :lol:
|
Re: NV4500 swap is underway
Larry, do you have the 27 spline input gear you need yet? If you are still looking for one, I have one and I'm looking for a 10 spline. (sorry, I didn't have time to read back through and see if you found one)
|
Re: NV4500 swap is underway
camper updates?
|
Re: NV4500 swap is underway
Quote:
Yeah, link here to camper thread. :ito: |
Re: NV4500 swap is underway
DirtyLarry,
THANKS for the picture of the hydro-boost plumbing setup! Joe |
Re: NV4500 swap is underway
i have a 72 k10 i want to put an nv4500 behind a big block chevy 396 is it possible
|
All times are GMT -4. The time now is 05:48 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com