Re: My 52 GMC Build
4 Attachment(s)
Today I finished up putting in my mock up drive shaft. I used the front and rear section of the cube vans two drive shafts to make one. Now I can get one made. I used some 6" tube for the frame notch. Also got the E brake peddle in place, once I figured where I wanted it.
Attachment 1423216 Attachment 1423217 Attachment 1423218 Attachment 1423219 |
Re: My 52 GMC Build
2 Attachment(s)
Well after getting my e brakes hooked up with my universal cables that work great. Also hooking up my shifter cable. I decided to see if my electronically controlled trans had any gears with no computer. So I put it in gear and pulled it out of the shop slowly :bann: (no real brakes). Then put some blocks on front of the wheels and did a burn out :metal: I'll get a vid this weekend.
Today I picked up all my steering components and shocks. Attachment 1424136 Attachment 1424137 |
Re: My 52 GMC Build
What kinda burn out's that? LOL! More black than white smoke?
|
Re: My 52 GMC Build
1 Attachment(s)
|
Re: My 52 GMC Build
Ya sure you got all the ford crap off? That IH motor should light er up! Just rubb'in ya!
|
Re: My 52 GMC Build
Ya np. I was happy it moved. I can't wait to lay some lines all the way down the street. Oh and I found out after it was in 3rd gear :)
|
Re: My 52 GMC Build
Lol!
|
Re: My 52 GMC Build
2 Attachment(s)
Well I got the gas tank filler neck welded in the fuel tank. Then pressure tested to 10 psi all good. Holes drilled and I'm ready to put the tank in. Just working on mounting my filters and pump then bolt tank in. Also got the brake peddle mounted.
Attachment 1425097 Attachment 1425098 |
Re: My 52 GMC Build
nice job, always nice having all the pedals hooked up. that stuff takes longer than people think.
|
Re: My 52 GMC Build
Tank is nice! Not many of us can make our own...well done.
|
Re: My 52 GMC Build
Quote:
Quote:
|
Re: My 52 GMC Build
3 Attachment(s)
Made up some stainless brackets to hold my fuel filters, water separator and electric pump. Also got tank mounted, all looks good back there. Then got my new front tires mounted. They are sexy.
Attachment 1425779 Attachment 1425780 Attachment 1425781 |
Re: My 52 GMC Build
Looking good! quick question about the pedals. They come out of the donor S10?
|
Re: My 52 GMC Build
Thanks. Gas peddle came out of the donor ford cube van. The 2 brake peddles and steering column came out of a mid '80's gm motor home (van front end).
|
Re: My 52 GMC Build
Nice work! Nice rubba marks too! :lol:
|
Re: My 52 GMC Build
3 Attachment(s)
So Friday I picked up trans cooler. Today I figured out where under the bed it's going. Not ideal but I have no more room up front and limited out back, but it will work just fine. The box says recommended for transmission, fuel, power steering. Fuel? Does any one know why you would need a cooler like this for fuel? Also got my new mirrors installed. I went with the 5x7 mirror because I will be towing with the truck and want to see.
Attachment 1428040 Attachment 1428041 Attachment 1428042 |
Re: My 52 GMC Build
With big high out put mechanical fuel pumps, the fuel temps can get crazy hot in a competition truck. I've seen guys that hot lap a lot install fuel coolers to help the fuel system live longer. It's cheap insurance for them when they have $5k or more in their fuel system.
|
Re: My 52 GMC Build
Quote:
|
Re: My 52 GMC Build
Here is a vid of a small burn out I did before I mounted the fuel pump in the back. Afterwards I realized that I was in 3rd gear. I hope link works.
http://vid51.photobucket.com/albums/...psgy8ojgqr.mp4 |
Re: My 52 GMC Build
Love this sound
http://vid51.photobucket.com/albums/...pshly2puws.mp4 |
Re: My 52 GMC Build
2 Attachment(s)
Well after a bunch of other fun commitments and off roading holidays. I got back in the garage last night. Made the drive shaft hoop for the front of the shaft. Nothing fancy but good and strong. Then started covering in the transmission hump.
Attachment 1433111 Attachment 1433112 |
Re: My 52 GMC Build
Thats some serious iron work!!!
What is the GVWR going to be on this rig when its done????? You may have to get a permit to drive that thing on a highway!!! lol ;) |
Re: My 52 GMC Build
Thanks. That tubing in the cab is 1x1 tube. I figure the truck will weigh around 5000lb. We will see.
|
Re: My 52 GMC Build
1 Attachment(s)
I got some more of the transmission tunnel done. I'm using 20ga sheet metal. Air hand sheers and the corner of my workbench.
Attachment 1433629 |
Re: My 52 GMC Build
lower50's, Hi neighbour!
I'm usually on the 60-66 forum, but I noticed you're in Kitchener so I wanted to check out what you're working on. I'm super impressed with your truck! It seems really well thought out... with the diesel and everything. And lots of fab work! I'm tuned in to see what's next... |
All times are GMT -4. The time now is 10:03 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com