![]() |
Re: Barn raising
Quote:
|
Re: Barn raising
I decided to powder coat the pulleys and fan rather than buy the new billet ones I was contemplating. It is just getting too expensive and I can always upgrade later. I figure that it might squeak for a while until the powder wears off in the groove, but it was free and it makes quite a difference. I will post pics tomorrow when I get it all assembled. While I was at it I took the power steering pump apart and coated that too.
My garage and driveway have been converted into a make shift paint booth so there is not much to take pics of that is not covered in plastic. |
Re: Barn raising
Quote:
- Mike, if you need any info (parts, specs, etc...) for the alternator setup, let me know man. Got my engine fired and posted some videos. :metal: |
Re: Barn raising
Yes I would like to see that bracket, I am still leaning toward manufacturing my own because I am running low on funds nearing the end but if you found an easy fix I am interested.
|
Re: Barn raising
Swear I seen these mounted on a truck in town.
It's been a while but remember reading you can buy used Nascar tires. It must have been these - and I was mistaken about them being discontinued. http://wwwdelivery.superstock.com/WI...4093-18898.jpg |
Re: Barn raising
Sure but your tires will only last 20 laps:lol:
We had a 3/8 mile paved paved oval track here in town and there were some guys I knew that ran the track tires on the street but it got old real quick because the soft composition on the rubber made it not very practical. |
Re: Barn raising
That is so weird, I am Barn Owl on multiple forums, some are car/truck related some are not but I keep my user name the same. This was the first forum I ever joined and I had not come up with the name Barn Owl yet. I tried to change my user name but it is too much trouble here because this forum is bigger than most and it would be a logistical nightmare for the admin staff if they made it easy. My sister in law was down for a couple of days and slept in the office and the computer got turned off so I had to re log into this forum, I must have been tired and typed in the wrong user name and it took it, huh? said the last time I logged in was back in '09. I guess everybody already knows me as Mike, so I guess I will just keep it that way. Just for further clarification this is why my build is called Barn Raising.
|
Re: Barn raising
Quote:
Otherwise, if DD, you're going to have to pull into the pit often. :lol: |
Re: Barn raising
What's up Barn Owl? That's funny right there.:)
|
Re: Barn raising
Yeah, funny, an alter ego.
|
Re: Barn raising
Here is a look at the freshly painted engine. I just have the water pump and pullies mocked up to get a picture of it. I used the eastwood ceramic engine paint, flowed pretty thick through the gun so rather than reducing it I just up the PSI and it sprayed fine. Came out really good and is good to 650*.
http://i361.photobucket.com/albums/o...DSC_0003-4.jpg http://i361.photobucket.com/albums/o...DSC_0004-4.jpg http://i361.photobucket.com/albums/o...DSC_0001-3.jpg |
Re: Barn raising
Looks great
Posted via Mobile Device |
Re: Barn raising
Not sure if you can tell from the picture but I sprayed the intake manifold the Eastwood aluminum engine color also. I had thought about powder coating it and had also contemplated ceramic coating, but in the end powder was not recommended and ceramic was $120- $150 depending on which shop I took it to. It was $34 for the engine paint and I already had it. We will see how it performs, but for now it looks great, and the ceramic paint glossed up like any other urethane single stage car paint.
|
Re: Barn raising
Your new engine looks great. I be you're pumped about driving this beast again! You will be soon.
|
Re: Barn raising
It's the little details that are killing me right now, All the hardware that has to be buffed or painted or bought new... I cant believe how many times I have had to go back to the parts store because I need one more bolt to finish, then I discover I need another one. I had all the bolts from the disassembly in there respective zip loc bags but a lot are not making it back onto the motor because they just are beyond restoring. Today was especially frustrating because being New Years Eve every bodies closing early.
|
Re: Barn raising
Id get an edelbrock fuel pump, or make sure it doesnt exceed 6psi it will drip on your intake manifold with too much pressure and id hate to see iciy on a new motor lol
|
Re: Barn raising
Nice looking engine like the detail you put in it. Question on the first page what are the size of tires from your dads 29, I like the way they look.
|
Re: Barn raising
Quote:
Quote:
|
Re: Barn raising
Engine looks great mike!! Most old gm mechanical fuel pumps were rated 5 to 7 psi. I tend to stay in the 6 to 7 psi range because you can over pressure the needle and seat and over-fill the float bowl.
|
Re: Barn raising
His tires are 285/70R15. They are BFG's with a nice moon cap. Those are just his drive to the show tires, his show tires are more of the bias type old school fifties rod style with the parallel ribs for tread.[/QUOTE]
I'm old 64 so I like old school!!!:metal: |
Re: Barn raising
My dad is going to be 80 next year and he is still working full time at a physical job and he comes home every night and starts wrenching on the rod, I want to be as healthy as him when I am his age.
|
Re: Barn raising
Quote:
|
Re: Barn raising
Love the buildup of this truck !! keep up the great work!
|
Re: Barn raising
Ran into some trouble again today, the rack and pinion from the Mustang is right where it needs to be but unfortunately it is right in the way of the power steering pump and bracket. I had to redesign the bracket to work, which puts it higher but now I need to redesign the alt bracket to accommodate the new position of the power steering pump. Ugg!
Posted via Mobile Device |
Re: Barn raising
Where is the steering shaft going to run for your setup?
|
All times are GMT -4. The time now is 08:59 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com