The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   67-72 Chevrolet & GMC Pickups Projects and Builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=115)
-   -   1971 c10 stepside (https://67-72chevytrucks.com/vboard/showthread.php?t=485320)

raull 10-28-2011 12:37 PM

Re: 1971 c10 stepside
 
[QUOTE=Bennett--G4L;4978339]I agree, just wish I had it :lol: I love seeing pictures of your Camaro that thing is just Gorgeous. I do like the idea of the Magnacharger powder coated white to match your truck but twin turbos is just sick.
Posted via Mobile Device[/Q
yes but those chargers are 5k to 6k not cheap at all i can do a procharger set up for $3500.00 turbos are up there also, it all comes down to which looks cooler and so far most votes are for the twin t's

Cole Trickle 10-28-2011 02:26 PM

Re: 1971 c10 stepside
 
[quote=raull;4978348]
Quote:

Originally Posted by Bennett--G4L (Post 4978339)
I agree, just wish I had it :lol: I love seeing pictures of your Camaro that thing is just Gorgeous. I do like the idea of the Magnacharger powder coated white to match your truck but twin turbos is just sick.
Posted via Mobile Device[/Q
yes but those chargers are 5k to 6k not cheap at all i can do a procharger set up for $3500.00 turbos are up there also, it all comes down to which looks cooler and so far most votes are for the twin t's

If you got the cash its hard to compete with the final numbers a custom twin set up is capable of producing. Likew you know I have seen several that really spiral out of control once you dive into the custom header route. Eiher way I would probably go through and forge a 5.3 if your going for anything more than say 400-450 to the wheels.

I have seen guys flip stock manifolds and build cheap turbo set ups but something tells me your not going that route.

Personally I think a procharger will suck on a stock 5.3. I have driven a couple and at safe boost levels the fun is over before it really starts.

No matter what route you go being blown is the best..lol

http://www.riverdavesplace.com/forum...1&d=1319132168

raull 10-28-2011 03:04 PM

Re: 1971 c10 stepside
 
you are right buddy , nothing like the sound of a huge cam , then the whistle kicks in
can i get an amen !!!!
speaking of flipping manifolds check out this site i found , its a sierra dinali w fliped manifols twin t's
http://www.ls1truck.com/forums/power...n-turbo-6.html

raull 10-28-2011 08:38 PM

Re: 1971 c10 stepside
 
1 Attachment(s)
ok boyz , here they are , they are bullseye s256 56 mm by borgwarner and they are good for around 500+ hp each , we'll see :devil::devil:

CC69Rat 10-28-2011 09:02 PM

Re: 1971 c10 stepside
 
:lol: :lol: :lol: you have got to be kidding ..

Are you really? Just sit it in there like it is ! It will be awesome either way. You don't want to grenade your 5.3 man.. Are you going to go though the bottom end too?
Posted via Mobile Device

67cheby 10-29-2011 09:27 AM

Re: 1971 c10 stepside
 
i think a little tear just came to my eye !! WOW

big_al_71 10-29-2011 09:42 AM

Re: 1971 c10 stepside
 
Quote:

Originally Posted by 67cheby (Post 4979847)
i think a little tear just came to my eye !! WOW


Mike there is no crying on this thread!!!! :lol:

67cheby 10-29-2011 10:13 AM

Re: 1971 c10 stepside
 
it was tears of joy !!

jmedero 10-29-2011 10:29 AM

Re: 1971 c10 stepside
 
Nahh that's been done before. I say you get an eco tech out of a cobalt ss and do it up baby!! Lol
Posted via Mobile Device

raull 10-29-2011 09:23 PM

Re: 1971 c10 stepside
 
Quote:

Originally Posted by CC69Rat (Post 4979090)
:lol: :lol: :lol: you have got to be kidding ..

Are you really? Just sit it in there like it is ! It will be awesome either way. You don't want to grenade your 5.3 man.. Are you going to go though the bottom end too?
Posted via Mobile Device

i dont think im going to mess with it chad . it ill boost it up and see what happens , if 5.3 dosent hold, then itll be fun rebuilding

CC69Rat 10-29-2011 10:32 PM

Re: 1971 c10 stepside
 
All joking aside, yeah I agree. I was really just kidding around. I'd just sit it in there as is. I like the LS motors. A lot of power and mpg. Mine will be lucky to get 6-8mpg.
Posted via Mobile Device

raull 10-29-2011 10:57 PM

Re: 1971 c10 stepside
 
lol i get 5 mpg on a cool day if im lucky, big blocks are my favorite , yours and bennette's look sweet , mine came off of a 88 hd chevy truck , it is a 4bolt main and it was rebuild with its factory crank and rods , then added some 30 over forged pistons , mild cam with aluminum heads, something simple , then it began , procharger but with the heat downhere it was nothing but problems with carbs, so i took it appart again down to the short block , so i added a comp cam w 670 lift so it rocks , fully roller , f.a.s.t. efi and set it up to run on strictly e85 fuel as its 105 octane , you can tell the rest just by the pictures , its putting 640 rwhp on a stock bottom end and its running awsome , so back to the 5.3 i want to see how far i can get with it ,no worries

big_al_71 10-31-2011 01:20 PM

Re: 1971 c10 stepside
 
1 Attachment(s)
Going thru my pictures I found this picture from three years ago when Raul was putting my engine together. time flies when you are having fun.

72BlckButy 10-31-2011 05:59 PM

Re: 1971 c10 stepside
 
Great pic Al! It's amazing when you take the time to stroll back through your build pics what all you can come across. :)

big_al_71 10-31-2011 09:01 PM

Re: 1971 c10 stepside
 
So true Nate ...
Posted via Mobile Device

Splash4195 10-31-2011 10:43 PM

Re: 1971 c10 stepside
 
Wow nice build!

jmedero 10-31-2011 10:46 PM

Re: 1971 c10 stepside
 
Nice pic. Your engine is very clean man.
Posted via Mobile Device

raull 11-01-2011 11:02 AM

Re: 1971 c10 stepside
 
1 Attachment(s)
how about this set up !!!

raull 11-01-2011 11:06 AM

Re: 1971 c10 stepside
 
1 Attachment(s)
this one has valves closer to t's

67cheby 11-01-2011 11:25 AM

Re: 1971 c10 stepside
 
Quote:

Originally Posted by raull (Post 4984857)
how about this set up !!!

holy batwings batman........that is sick !!

VA72C10 11-01-2011 12:25 PM

Re: 1971 c10 stepside
 
they're both....okay.... :metal:

raull 11-01-2011 09:43 PM

Re: 1971 c10 stepside
 
1 Attachment(s)
hello boyz , i need a little help deciding , as you know one of the downsides of stepsides is the lack of room for equipment , i lower the truck to its lowest point used a rod for driveshaft purpuse, i will be raising bed panel so i have room to put the tank as u see in pictures , no exhaust will go trough here as its going on the outside of chassis , i cant put it behind rear end as im inatalling gas tank back there , it does not fit anywhere near the sides of bed so i can make work where is at , thoughts please or have u guys seen anything else , thanks

67cheby 11-01-2011 11:39 PM

Re: 1971 c10 stepside
 
i cant post a pic of mine from this computer that i am at now...but if you look somewhere in my build thread i think you could do it like mine !

raull 11-02-2011 07:34 AM

Re: 1971 c10 stepside
 
thank's mike ill do that

raull 11-02-2011 07:49 AM

Re: 1971 c10 stepside
 
mike its on page 12 post # 294 , you have a 4link set up ouside the chassis i still have the factory bar set up so that wont work for me , bid advantage with fleetside i saw u have compresors , battery , tank and still have room for a spare engine , lol
thanks


All times are GMT -4. The time now is 03:14 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com