![]() |
Re: What Did You Do With Your Truck Today ?
Good to meet you too Bshort. Hope the rain didn't ruin your San Diego trip too much.
|
Re: What Did You Do With Your Truck Today ?
2 Attachment(s)
OK hear my pictures.It took us two hours to load it on the trailer, but only thirty minutes to unload.Attachment 828882
Attachment 828881 |
Re: What Did You Do With Your Truck Today ?
Nope, we brought umbrellas. Spent a couple hours in Seaport Village then headed home.
|
Re: What Did You Do With Your Truck Today ?
Quote:
|
Re: What Did You Do With Your Truck Today ?
2 Attachment(s)
I checked to see if my two front cab mounts were level...
|
Re: What Did You Do With Your Truck Today ?
they dont mess with the old cars much here. the local PD has a 1950 some ford police car that shows up now and then at cruze nite
__________________ i wish the police force here would use older cars or trucks - maybe we would have a chance _lol |
Re: What Did You Do With Your Truck Today ?
AD 51
nice lookin weld work on subframe |
Re: What Did You Do With Your Truck Today ?
1 Attachment(s)
just fit my bumper after days and days of massaging it to fit properly, passesnger side was hit fairly hard at some point and poorly fixed with Bondo and shimmed with washers. had to heat, beat, and use a 25 ton press to get it even close to straight. I still have to de chrome the 2 upper replacement bumperettes but getting close to finishing the rough metalwork on the body. I just have the hood and the 2 inner fenders to do then I get to move onto the finishing touches on the engine and start roughing out the interior.
|
Re: What Did You Do With Your Truck Today ?
that front end looks very cool - nice work on gettin' it straightin; out
|
Re: What Did You Do With Your Truck Today ?
thanks, Took a while but it`s much better than how the last guy fixed it...1inch thick coat of bondo.:lol:
|
Re: What Did You Do With Your Truck Today ?
have you had any hood fitting issues?
|
Re: What Did You Do With Your Truck Today ?
no... not yet anyway.:lol:
the front end sheetmetal is just hanging loosely by a few bolts. I did have the gaps a little too tight in some spots so I have to shim a bit for spaceing since it only has a thin coat of primer vs a few coats of paint, I figued it out that the overall final paint thickness for all the surfaces combined (side to side) will affect the gaps by close to 3/16" overall so I'm trying to compensate for that a bit. the truck is going to be 90% disassembled when it goes for paint so I didn't want to do any final fitting until then. I do have to pull the hood still to fix 2 rust spots and trim the inner edge by the rad for a bit of extra clearance. |
Re: What Did You Do With Your Truck Today ?
still ......... looks good !
|
Re: What Did You Do With Your Truck Today ?
Finished up the new floor and kickpanels, got them covered with bedliner and undercoating. Also fiberglassed in some minor rust in the floor pan under the seat and door wells. read to clean up the dash and paint. Next is the doors! .... Killing time waiting on a buyer...
|
Re: What Did You Do With Your Truck Today ?
5 Attachment(s)
I worked on my rear suspension crossmember and cut out and tacked the brackets for the lower control arms. I have to do a mock up on the frame then break down the brackets so I can bend the top to match the curve in the frame.
|
Re: What Did You Do With Your Truck Today ?
Daze 57
Thanks, I have an 02 Ext cab frame, cut out 5" and put it back together and plated the outside just to make myself feel better. |
Re: What Did You Do With Your Truck Today ?
Quote:
|
Re: What Did You Do With Your Truck Today ?
Today I got the bench seat out of the cab and took off the passenger door. I know it's not anything major, but baby steps is about the best I can do with the limited time I have to play...
|
Re: What Did You Do With Your Truck Today ?
Painted valve covers and air cleaner see my build. :ito:
|
Re: What Did You Do With Your Truck Today ?
Well, this week started on the right door rust and dent repairs. Soaked bottom of door over the weekend in phosphoric acid...worked pretty good. revealed more rust than I thought ( I should know there's always more than you think). Made a patch for the inner and started on the outer patch ( Half done).
|
Re: What Did You Do With Your Truck Today ?
2 Attachment(s)
A couple of rust repair pics.
|
Re: What Did You Do With Your Truck Today ?
2 Attachment(s)
Inner patched, and outer half done.
|
Re: What Did You Do With Your Truck Today ?
Nice work !
Quote:
|
Re: What Did You Do With Your Truck Today ?
Thanks, I really enjoy the metal fabrication...more than pounding out dents and doing the straightening!!
|
Re: What Did You Do With Your Truck Today ?
1 Attachment(s)
Painted small bits. This is all I could find to paint so I must be getting close??
|
All times are GMT -4. The time now is 08:51 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com