Re: 1957 Chevy truck re-rebuild
 

I like the one piece base for the two bucket seats. Make the mounting look cleaner to me. Very nice! Are you going to box any of the frame rail behind the rear lower control arm bracket?

Re: 1957 Chevy truck re-rebuild
 

Nice work on the seat frame!

Re: 1957 Chevy truck re-rebuild
 

Ok...Lets have a show of hands. How many people copied and saved tons of pics from this thread to use for future refrence.

Ok I saved a few. I'm probably not going to be to this level of perfection on my build, but the pics are so good and documentation is so clear I will definately be revisiting thoughout my build.

Lots of things here to inspire my build. Thanks for taking the time to share this with all of us.

Re: 1957 Chevy truck re-rebuild
 

Nice seats.
Kim

Re: 1957 Chevy truck re-rebuild
 

papastrk, Thanks, I did sit a visualize the one frame concept for some time before I started in. There are some additions soon to come with the seat framing, I'll get those posted soon.

Moving to the frame question... I'm planning on leaving the frame behind the control arm the way it is. I believe with the square frame of the independent, that'll be strong.

But.... as I've been visiting this forum an issue has been brought to my attention. The idea of the front weight of the cab mounts reaching out beyond the frame can put stress on trying to twist the frame outward.

Without going to the extent of boxing the frame, I decided to reinforce the upper frame to the transmission crossmember. This reinforcement isn't too far from the cab mount so I hope it helps the situation.
http://i1139.photobucket.com/albums/...ps09944f23.jpg

For those who like the breakdown of the build, here goes.;)

The crossmember is hollow, if I drilled and tightened against it, it would collapse and never stay true. If I drill oversize then put in a sleeve, I've got a nice strong and clean look when done.
http://i1139.photobucket.com/albums/...ps75f98d23.jpg

I made the tube slightly longer so a large washer can be welded to it.
http://i1139.photobucket.com/albums/...psc2be7735.jpg

After the welding and clean up.
http://i1139.photobucket.com/albums/...ps890367e5.jpg

A closer look at the finished brace.
http://i1139.photobucket.com/albums/...psd5be1cd7.jpg

Re: 1957 Chevy truck re-rebuild
 

ChuckDriver, thank you very much.

av8tr33337, wow, it's always nice to hear that inspiration has come from this build thread. Thank you.

Kim57, I've been looking and looking at seats for about a year now. I've come close to hitting the order button on others, but I'm extremely with how these wrap around my body.

Re: 1957 Chevy truck re-rebuild
 

That brace came out nice.
Kim

Re: 1957 Chevy truck re-rebuild
 

Great Build! I love the Exhaust set up. I know that you stated:metal: that you purchased your tips and cut out valves from JEGS. Can you let me know where you purchased the rest of your kit from. I am assuming the pipes and mufflers came in a kit? Thanks!

Re: 1957 Chevy truck re-rebuild
 

Thanks for the compliment. The cut outs and the outlets are from Jegs, correct.

Pretty much the rest is all fabricated from going to the local muffler shop and giving them a drawn image and have them do some bending.

The x-pipe was home made with a couple pieces of 2 1/2" pipe.

The flanges were cut with the torchmate plasma cutting system.

Otherwise, I spent alot of time on my back trying to imagine how I can make it all fit together.

I've had the system all together and running in the garage and it worked perfect. Now that I'm getting closer to finishing this truck I can't wait to drive and have some fun with it.

Re: 1957 Chevy truck re-rebuild
 

Thanks. You have done a great job. I appreciate your attention to detail. I plan on using a MagnaFlow System. I had planned on my tips exiting thru the steps also but had not gotten as far as you. You saved me a lot of time. I do have a question about the mesh adapter connected to the tips. I assume you are using it for vibration purposes? Where did you find those? Also, keep up the great work and keep the pictures coming.

Re: 1957 Chevy truck re-rebuild
 

Yes, the flex couplers are for are for vibration and when the bed flexes over bumps and such.

Especially with a X pipe system where there is no flex through out the whole system.

I got mine from Jegs also. I used the 2 1/2" inch part # 555-30771. If you use a different size, by using this number on the Jegs site, it should get you to all the variables available.;)

Re: 1957 Chevy truck re-rebuild
 

Hey Stepside

Can you tell us more about your torchmate? How do you like it? Suggestions, what size, what plasma are you using, etc?????? I have always wanted one. Getting tired of cutting things out with a wheel, and then having to grind it etc...

How did you finish off the exhaust exit on the step? Looks like you have some kind of metal roll or ??? on there? Looks good.

Re: 1957 Chevy truck re-rebuild
 

Hi hotrod1, I've had a couple personal messages on the outlets and the steps, I'll put up some pictures to show how I got the edge.

I decide to use square vs round for the edging. I knew I'd want to use body filler to smooth around the edge, if I used round material I'd have to fill under the edging also.

By using the torchmate I cut the edging for a piece of 3/8" plate. I made it slightly oversized, always better to have to much material vs not enough.

Here is how the edging fits around the exhaust tip.
http://i1139.photobucket.com/albums/...k/102_2170.jpg

There was no way I could shape the edging as one piece, so I cut it in half and by clamping it in the vise and using a hammer I was able shape it to be very close to the contour of the step.
http://i1139.photobucket.com/albums/...k/102_2172.jpg

Once I shaped both pieces I was able to weld them back together as one piece. The far end is welded, the near end has a gap, since the other end is secure I tacked the close end then put it in the vise and filled the gap, then ground it smooth.
http://i1139.photobucket.com/albums/...k/102_2173.jpg

Once together it fit nicely.
http://i1139.photobucket.com/albums/...k/102_2176.jpg

Once I had the fit I did a 100 % weld on the inside. I didn't want and vibration to allow a crack to happen where the step and the edge meet.

Once it was done I assembled all the pieces. The tip comes through at an angle so I still had to fine tune to get the same clearance all around the tip.

As for the torchmate..... I use a Miller spectrum 2010 I think. I believe it'll cut up 1" thick. A lighter duty plasma cutter, say that cuts up to 1/2" would probably work fine in most situations.

I knew absolutely nothing about CAD systems to design the cut, it just took time and error for me to figure the CAD system. At first it fights you, then once you learn it, it works with you.

Once you become familiar, the simplest items I hardly think about. Often I will draw and make what I want out of construction paper, once the pattern is made I use the scanner/copier and use the image to create a cut path. Then let the machine make the cut.

There are times when the day almost over so I'll bring my patterns into the house and while inside I'll create the cut paths so the next morning I'm ready to hook up and cut right away.

Costly, yes, I was fortunate, but we won't go there.;)

Hope this helps.. Jim

Re: 1957 Chevy truck re-rebuild
 

Thanks for the demonstration. Dont think that I can fab that though. Need a torchmate. What model torchmate is it? What software? I was thinking about their 2x2. Do you think that that is big enough?

Re: 1957 Chevy truck re-rebuild
 

I'd say for 90 some percent of what I do a 2X2 table would be fine. One time I needed the 4X4 table lately was making the crossmember sides.

Mine is a 2008 model I'm sure the software has probably been updated, as long as they keep it user friendly, you should be fine. I can only compare it to Autocad, yikes, I get lost with that one. The Torchmate cad system is much more user friendly and still has plenty of definition to the drawings that you do.

The tech support has been very kind the couple times I've called them also.

Plasma cutting does create a fine dust in the air. Some use a water tray under the table to catch the dust. I have a pretty good exhaust fan so I run it when cutting. If your shop is attached to the house this could be an issue.

Re: 1957 Chevy truck re-rebuild
 

Moving along on the seat bracket. One reason for the framework was I knew I was gonna need a floor counsel to support the shifter. I wanted a sport shifter that has a ratcheting mechanism, so a real long handle shifter wasn't going to work.

If mounted to the floor, way too low.
http://i1139.photobucket.com/albums/...ps5513ce1d.jpg

Fortunately a couple blocks of wood raises it to a comfortable height.
http://i1139.photobucket.com/albums/...ps52d63129.jpg

With most of the frame assembled I was able attach the shifter and get a feel for how it works.
http://i1139.photobucket.com/albums/...ps69ab24fb.jpg

The design of the shifter causes the handle to go forward quite far for park . My only cure was to angle the shifter mounting back to offset the forward lean into park. This is also the very first time I tried my new bead roller. I wanted a design that was similar to the design on the inside door panels.
http://i1139.photobucket.com/albums/...psca1615ce.jpg

I got the plastic B&M cover trimmed to fit the angle and installed the other interior pieces to check the drivers fit.
http://i1139.photobucket.com/albums/...ps3e33c913.jpg

Re: 1957 Chevy truck re-rebuild
 

That is going to be nice.
Rich

Re: 1957 Chevy truck re-rebuild
 

Looks real good.
Kim

Re: 1957 Chevy truck re-rebuild
 

Nicely done!!

Re: 1957 Chevy truck re-rebuild
 

Just keeps getting better and better. That is going to be one nice interior!

Re: 1957 Chevy truck re-rebuild
 

You mentioned using an etch primer? Epoxy is not etch primer? I think using something to etch first then epoxy is better?? I'm kinda just asking the questions....

Re: 1957 Chevy truck re-rebuild
 

This is great, 10 seconds to up-load a picture to photobucket, high speed is wonderful.

Thanks everybody, this my first attempt at creating an interior so I'm slowly stepping into this project.

One other reason for the center counsel was to give a side foot rest. With the flat floor I have no place to prop my right foot while driving, especially if I take a long trip.

Here's the fit.
http://i1139.photobucket.com/albums/...psebf3fc74.jpg

I stopped the bead roller just before it reaches my foot. I know I'll end up wearing off the paint or what ever is there. Once finished I plan on cutting a piece of stainless steel and attaching it where my foot will make contact.

dicer, on the etching primer/ epoxy primer. For years the etching primer was the way to go. It was like an acid based primer, it would etch into the metal and the primer would hold well to it. I used it for along time, one issue was it usually wasn't recommended over body filler or left over paints or primers. Plus it had no filling characteristics.

Then comes epoxy primers. Extremely universal, can be used over fillers and prepared paints and primers and although it does have a slight filling characteristic it is nothing like a good filling primer and it holds to metal very well. Another plus is it is good for coating something that will not be painted for sometime, it is not porous so it should lock out moisture.

Now, spraying epoxy over etching primer, I can only say, "lean to the safe side". We have to be chemists anymore with all the different stuff we mix and spray. With all the choices, one thing to be very careful not to use products that could repel each other.

I usually tell beginners, find a brand name that covers bare metal to clear. If you have any issues when done and you bring in a paint representative, he can not back away if it was his product line used 100 percent.

Re: 1957 Chevy truck re-rebuild
 

I've been working on this truck for some time now. Lingering in the back of my mind is what I'm gonna do about wheels and tires, so many choices.

I not only have to figure what wheels, but also the size and the offset for the mounting.

Fortunately I have a very kind tire dealer in town, he allowed me to take home and try a couple different wheels and he mounted used tires on them also so I could get a good idea of the fit.

I went with Boss 338, 18" x 8". Here's the outcome.
http://i1139.photobucket.com/albums/...ps51e463a5.jpg

http://i1139.photobucket.com/albums/...ps9128c503.jpg

I've been pondering what steering wheel to go with also. Once the wheels were on the truck, it was an easy decision. They very closely match the spokes of the wheels.
http://i1139.photobucket.com/albums/...ps0a8a713c.jpg

Getting these things figured out now is gonna help me keep my focus later when I start painting.

Re: 1957 Chevy truck re-rebuild
 

Those are nice.
Kim

Re: 1957 Chevy truck re-rebuild
 

Your truck is really taking shape Jim. Looks great, and the wheels look really good on it.