The 1947 - Present Chevrolet & GMC Truck Message Board Network

Page 10 of 33

« First

Last »

Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- 67-72 Chevrolet & GMC Pickups Projects and Builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=115)

- - Project "Shifted" (https://67-72chevytrucks.com/vboard/showthread.php?t=551258)

Zukowner

02-03-2014 06:53 PM

Re: Project "Shifted"

Hey Rob what are your wheel, and tire specs?

Rusbuilt

02-03-2014 06:57 PM

Re: Project "Shifted"

Quote:

Originally Posted by Number98 (Post 6506300)

http://www.entropyrad.com/

Thanks!

Hart_Rod

02-03-2014 07:58 PM

Re: Project "Shifted"

Quote:

Originally Posted by snailhouse_projects (Post 6506195)

smokin build! I really like the detail. I wish I would find more builds with 1/2 ton C-10s that are leaf sprung. my 69 GMC is leaf sprung but will be on bags in the future.... just need to button up some other projects first.... keep up the work ! I know I will be referencing this thread a whole lot in the near future!

Thanks!

Quote:

Originally Posted by Zukowner (Post 6506309)

Hey Rob what are your wheel, and tire specs?

Coys wheels/BFG tires, rear: 20 x 10 (5" BS) 295 40/ front: 20 x 8.5 (4.75" BS) 245 40s

Number98

02-03-2014 08:18 PM

Re: Project "Shifted"

This little truck is really looking Good Rob!

Quote:

Originally Posted by Rusbuilt (Post 6506313)

Thanks!

Anytime Rus

C10_ustacould

02-03-2014 08:58 PM

Re: Project "Shifted"

Quote:

Originally Posted by Hart_Rod (Post 6506142)

Looks like we are going to finish building it and see where it goes from there.

Straight into my garage! ;)

Rusbuilt

02-03-2014 10:52 PM

Re: Project "Shifted"

^^Like^^ lol

Hart_Rod

02-03-2014 11:09 PM

Re: Project "Shifted"

Quote:

Originally Posted by fastbagged68 (Post 6499695)

Call Tobin @ Kore 3. I bought the master cylinder from him for I think $80. I bought the MBM 9" booster from Curt @ Hill's, and the booster bracket from CaptFab. Here is the only picture I have of the set up.... Hart Rod does the motor look famailiar

Nice! Need more details and pictures!!!

Quote:

Originally Posted by Number98 (Post 6506425)

This little truck is really looking Good Rob!

anytime Rus

Thanks!

Quote:

Originally Posted by Bucks68 (Post 6506503)

Straight into my garage! ;)

I didn't think you like bags........;-)

Quote:

Originally Posted by Rusbuilt (Post 6506725)

^^Like^^ lol

:lol:

slowcpe

02-03-2014 11:48 PM

Re: Project "Shifted"

Not sure how I missed this one. Great looking truck.

C10_ustacould

02-04-2014 12:10 AM

Re: Project "Shifted"

Quote:

Originally Posted by Hart_Rod (Post 6506760)

I didn't think you like bags........;-)

Hard not to like the Porterbuilt/Accuair combination! :metal:

Hart_Rod

02-04-2014 10:38 AM

Re: Project "Shifted"

Quote:

Originally Posted by slowcpe (Post 6506851)

Not sure how I missed this one. Great looking truck.

Thanks!

Quote:

Originally Posted by Bucks68 (Post 6506893)

Hard not to like the Porterbuilt/Accuair combination! :metal:

True! Definitely a lot of high quaility parts.....Other than the engine and transmission, Jake's will be set up nicer than mine....:jdp:

Hart_Rod

02-13-2014 10:37 PM

Re: Project "Shifted"

2 Attachment(s)

I finally got the rear bag brackets welded on the rear, then sandblasted and painted it, and installed new axle bearings and seals. Just need to put the rear cover back on, add some lube and bolt it back up... then on to the front to install the Holley accessories. I also ordered our EFI harness from BP Automotive. I've hear all good things about Bill and his harness. After that is installed, I plan on ordering an Accuair e-level setup and then finally the bed parts....

screaminchevypickup

02-13-2014 10:57 PM

Re: Project "Shifted"

Looking good rob!!

mcbassin

02-14-2014 12:08 AM

Re: Project "Shifted"

Nice progress!
Maybe you already said and I missed it. What is the plan for bed? You keeping the step bed? Are you planning to do a full paint job?

Rusbuilt

02-14-2014 12:14 AM

Re: Project "Shifted"

Nice Rob!

Hart_Rod

02-14-2014 11:22 AM

Re: Project "Shifted"

Quote:

Originally Posted by screaminchevypickup (Post 6524672)

Looking good rob!!

Thanks!

Quote:

Originally Posted by Rusbuilt (Post 6524788)

Nice Rob!

Thanks!

Quote:

Originally Posted by mcbassin (Post 6524785)

Nice progress!
Maybe you already said and I missed it. What is the plan for bed? You keeping the step bed? Are you planning to do a full paint job?

I'm going to buy a new fleetside bed. Hopefully we can just color match it to the front.

aggie91

02-14-2014 12:12 PM

Re: Project "Shifted"

Man, I was hoping it would stay a stepside...

Hart_Rod

02-14-2014 08:51 PM

Re: Project "Shifted"

Quote:

Originally Posted by aggie91 (Post 6525585)

Man, I was hoping it would stay a stepside...

Sorry, I gave Jake the option, but he likes the fleet bed more...

Hart_Rod

02-18-2014 09:16 PM

Re: Project "Shifted"

5 Attachment(s)

Quick update: We got the rear end is back in with new axle bearings and seals, disc brakes mounted. I checked the Eaton posi unit and 3.73 gears and they looked great. We also installed a vent on the rear that I picked up at Advance Auto and got the rear brake lines finished. After that we did a little "accessorizing" on the engine - Holley style, :D. I also test fitted the Entropy radiator and the rad cover from Hotrod Dynamics.

screaminchevypickup

02-18-2014 09:17 PM

Re: Project "Shifted"

Looks good rob!!

Rusbuilt

02-18-2014 10:18 PM

Re: Project "Shifted"

Very nice!

Rochlow

02-18-2014 10:24 PM

Re: Project "Shifted"

Quote:

Originally Posted by Hart_Rod (Post 6532684)

Are those CPP rear brakes? My instructions told me to mount them on the opposite side? Hmm.

GAc10boy

02-18-2014 11:10 PM

Re: Project "Shifted"

Wow

mcbassin

02-18-2014 11:11 PM

Re: Project "Shifted"

Your builds never cease to amaze me. Super quality parts and craftsmanship :metal:

67_ShortFleet

02-19-2014 09:38 AM

Re: Project "Shifted"

I'm in. Nice work!

Hart_Rod

02-19-2014 10:46 AM

Re: Project "Shifted"

Quote:

Originally Posted by screaminchevypickup (Post 6532687)

Looks good rob!!

Thanks!

Quote:

Originally Posted by Rusbuilt (Post 6532796)

Very nice!

Thanks!

Quote:

Originally Posted by Rochlow (Post 6532806)

Are those CPP rear brakes? My instructions told me to mount them on the opposite side? Hmm.

They are CPP. You can put them in either way, but I like the "Corvette" look. I mounted them the same way on my 68 and my Suburban.

Quote:

Originally Posted by GAc10boy (Post 6532893)

Wow

Thanks!

Quote:

Originally Posted by 67_ShortFleet (Post 6533381)

I'm in. Nice work!

Thanks!

Quote:

Originally Posted by mcbassin (Post 6532896)

Your builds never cease to amaze me. Super quality parts and craftsmanship :metal:

Thanks Mike! Quality parts make the builds a lot easier. As far as craftsmanship, I just good project manager and am good at following directions and reading diagrams...;).

All times are GMT -4. The time now is 03:31 AM.

Page 10 of 33

« First

Last »

Show 40 post(s) from this thread on one page