Re: My new build thread: Stage 4!
Off topic, but got a brand new set of shoes for the dailey driver S10 today. Nice set of P235/75/R15 Goodyear Wrangler Silent Armor A/T's. They are sweet! Try to post up some pic's asap. Ordered up some more parts for the K5, should be here soon!
|
Re: My new build thread: Stage 4!
Come on, going to be a nice weekend. Get some wrenching done.
|
Re: My new build thread: Stage 4!
Going out to the storage barn tomorrow, to retrieve the rear seat for sale.Possible sale on the original wheels too-funding for the Ballistic stuff!
|
Re: My new build thread: Stage 4!
Rear seat sold-waiting pickup. Guess I'll hang on to the wheels for now, gonna be another 1st gen blazer in the future. Possibly a 2wd, starting to grow on me for summer use here. Gotta go thru the 4 sale stuff and free up some more $$ for the Ballistic stuff!
|
Re: My new build thread: Stage 4!
Just cleaning out the mothballs. Talked to Nathan at Ballistic fab, and have my high steer kit ready to be ordered. As alway's, just clearing the funds. This stuff is not cheap, and stage 4 has to be right! Sorry, nothing else new here, or any pic's.
|
Re: My new build thread: Stage 4!
Bought a rebuilt left front brake caliper off e-bay for the dana44 front axle. Have to get the blazer out of the storage barn in the next week or so. Hated to spend any money on the 44, but have to be able to drive it home. Blazer is parked in front of everybody else's stuff in the barn, so I am first to evacuate. Need to pick up some 3/8" rubber fuel line to replace my rotted out lines also. Stage 4 is going to be on soon-this spring it begins!
|
Re: My new build thread: Stage 4!
Oh man, got crazy and bought more stuff! Pic's too come asap.
|
Re: My new build thread: Stage 4!
An update, sort of. Got the caliper, a 25' roll of rubber fuel line, a bunch more of needed parts for the swap, etc., lately. Going to get the K5 out of storage after next week. Working on funds for the Ballistic stuff to go on when the 1 tons go in. I want to do the steering setup at the same time as I do the axle swap. I will take pic's of the spring extraction soon!
|
Re: My new build thread: Stage 4!
Good news tonight. My sponser (dad), is back from wintering in Florida. He is the man! Already has a bunch of pending sales on some of his leftover Pontiac resto stuff. Might be a little bit before the deals go through but looks good. Guy's wanting the stuff are from out of state, and need to pick it up with a trailer. Putting up a good deposit, so just have to wait it out. With what I've saved up and his help I should be set for my Ballistic steering setup for the dana60! Only going with the high steer arm setup and their chevy TRE crossover kit for now. Anybody ?
|
Re: My new build thread: Stage 4!
Oh man, Oh man. Talked to Dad today and new garage/pole barn plans are in progress here soon! Looks like it might be this summer for the build! I am really excited about this development for the build/storage/shop/man cave!
|
Re: My new build thread: Stage 4!
Want to go with a 30'x40', but not sure if I have the room. Might end up with a 24'x32'. Really hope not so small, current garage is about that size and crammed full. Still planning, way too much stuff, plus the K5- only bay/work area!
|
Re: My new build thread: Stage 4!
Spent time surveying the property for the pole barn. Got a plan or two. K5 comes out of hiding this next week!
|
Re: My new build thread: Stage 4!
Got the wife a new, nicer digital camera for moms day. That means I can have her old one for more pic's of the k5 soon! If no work saturday, blazer comes out of storage. Can't wait to get started again! My bud up the street is ready also to help out. Currently swapping out 2&1/2 ton axles for a 5 ton setup, with way bigger tires on his monster short bus! I will try and get some pic's of stuff this weekend! Thank's for following my boring thread so far, hope to make some actuall progress on stage 4 real soon.
|
Re: My new build thread: Stage 4!
cool deal! Looking forward to some pictures and the progress!!!
|
Re: My new build thread: Stage 4!
No pic's yet, but K5 is at the house again! Dumped some fresh gas in and drove it home. Only 1+ mile or so, but it's great to have it back here in the yard! Pretty much decided that it's not going back in storage again. It's time for stage 4 to kick it in!
|
Re: My new build thread: Stage 4!
Hey bud, been waiting to see you start to cut into this for some time. You have done your homework and bought a good batch of parts and panels.
Just thought that I would pass along some info on the Ballistic Arms that you have been saving up for. In the last couple of months there have been a ton of threads on Pirate and some new ones on CK5 where guys are just not getting there stuff, wrong stuff of its taking months from Ballistic. I'd hate to hear that you spent your money and turns into a nightmare. Just for your info. Good Luck Mike |
Re: My new build thread: Stage 4!
Thank's for the heads up NorCal. I talked with Nathan at Ballistic awhile back and he did say they were waiting to get the arms cut and finished. Anybody else got any info along this line? Almost ready to order stuff up and don't need any more setbacks,thank's.
|
Re: My new build thread: Stage 4!
Am having electrical trouble, new battery keeps going dead overnite. Traced it down to the wire setup I have replacing the fusible link off of the positive battery terminal. Fusible link is gone, just light gauge wire from the block on the inner fender to the battery terminal, bolt came loose. Anyone know where I can pick up a upgrade link for this? Problem solved for now, but want to fix this for good.
|
Re: My new build thread: Stage 4!
Looks like battery problem solved for now, holding a charge. Good news today, big Pontiac money coming by the end of next month! Should be enough to get this resto going again. Ready to order up the Ballistic high steer setup, tie rod end setup for crossover/high steer is next in line. Gonna start replacing rotted rubber fuel lines to the fuel tank tommorrow if no rain here. Anybody heard any more negative feedback about Ballistic lately?
|
Re: My new build thread: Stage 4!
Well, I started to replace fuel lines tonight and ended up dropping the tank all the way out. The tank is a replacement out of a 1972 2wd suburban I swapped in years ago. Every rubber line is rotted out, gonna rethink this. Already was considering a fuel cell in the future, but am really leaning in that direction. For now, I am going to clean this tank up, replace lines, etc, put it back in. Thinking about a custom fuel cell more and more because of my future plans for the motor upgrade. As in electric pump, EFI, etc. Gonna start searching for a fuel cell that will work good in our 1st gens-hopefully without spending a fortune to do it. Anybody ?
|
Re: My new build thread: Stage 4!
check fuel cell guy and boyd's welding...both vendors on here who make tanks for our trucks and custom tanks. Sure they can make a nice tank for your blazer and they both work with EFI also...
|
Re: My new build thread: Stage 4!
Thank's VA, I already sent fuelcellguy a PM. Also just ordered up a new fuel sending unit for the old tank for temporary service. Need to search for old info on the fill neck replacement, vent hose, and main. Seen good info here, but need to find it again, searching. Thank's, Bryan.
|
Re: My new build thread: Stage 4!
Found fuel fill hose to fit, ordered up 6 ft. Enough to do it at least twice! This stuff is not cheap! Gotta love the info on this site!
|
Re: My new build thread: Stage 4!
Still working on cleaning up the 72 burb tank, it is worth saving. Straps in good shape also,yet I have a real good spare set of straps too. Got a new sending unit complete, stainless retaining ring w/seal here already. Waiting on the new marine fuel fill line hose, be here by the end of the week. Gotta empty the tank completly yet and clean it up for repaint and etc. Also ordered up a pair of ORD's front upper shackle hangers-(FUSH), for the front leaf springs when I swap in the 1 ton Dana60 soon.Should have time to snap some pic's this weekend!Has anyone done the FUSH swap on thier 1st Gen?
|
Re: My new build thread: Stage 4!
Ok, has anybody used ORD's FUSH KIT?
|
Re: My new build thread: Stage 4!
Got the ORD FUSH kit for the front leaf springs. Looking at clearance issues on the passenger side area right where the header is. Driver side header has plenty of room, but passenger side was tight when I installed headers years ago. I actually had to modify the head of the spring bushing bolt to clear the header. To install the ORD FUSH kit with the HD shackles, I will need even more room on the passenger side. Looking at a different set of headers to increase clearance here. Anyone know of a good set of headers that work well here?
|
Re: My new build thread: Stage 4!
Cleaned, sanded, and repainted the gas tank straps today. They look good for being 41 years old. Rubber strips are decent also, can reuse for now. May work on other tank parts tomorrow after the all day track meet. Happy Memorial Day everybody!
|
Re: My new build thread: Stage 4!
Ya, got some work done today.Completly drained fuel from tank, flushed out all the rust/shale/residue. Next step is to powerwash exterior of tank and clean for a repaint, then install new sending unit and reinstall tank and new lines. Getting there one step at a time.
|
Re: My new build thread: Stage 4!
Decided I was not done flushing the tank. Many times so far, and still rust scale. Did get the outside powerwashed and ready for repaint. Also got the new fuel fill hose today, it is exactly the right id and some really nice hose!
|
Re: My new build thread: Stage 4!
Got the tank all cleaned up and painted today. Almost ready to start putting it back together. Bought the wife a new digi camera a couple weeks ago, so I get the old one. Need to start snapping some update pic's! I will include some pic's of my friends 5 ton axle swap under his school bus, that thing is huge!
|
Re: My new build thread: Stage 4!
Turned on my outside water today, and sprayed the K5 inside and out. Ready to take it up the road 3 doors to my buds garage and start ripping!
|
Re: My new build thread: Stage 4!
Quote:
|
Re: My new build thread: Stage 4!
Took pic's today, busy, busy! Will try and post up tommorrow!
|
Re: My new build thread: Stage 4!
5 Attachment(s)
Here's some pic's!
|
Re: My new build thread: Stage 4!
5 Attachment(s)
Here's some pic's of my friends bus going 5-ton. Deadlined to have up and running is the 11th, for a mud bog.
|
Re: My new build thread: Stage 4!
Tank looks good! And that's the fun bus right there ;)
|
Re: My new build thread: Stage 4!
Mocking up the fuel fill assy, and looking for some interior pic's of any of you guy's setups. Bought a nice used assy to use but it is different from my original 1970 fill. Talking about the fill pipe/vent hose from the gas cap down to the tank. I can make a good setup out of two assy's, but would like some help here.
|
Re: My new build thread: Stage 4!
Man, oh man, what a good day! Looking at excavation site on the back of my property for K5 storage and deciding I need to take out about 7-or 8 really big trees. White pine, red pine, maple, etc. Luckily, my brother in-law is a ex smoke jumper, and is real good at falling trees. Confident he can take out at least 6 of these huge tree's without damage to any existing buildings, tough task! Worked on moving all my stuff out of the way tonight! Camper trailer, boat, fish smoker, etc. I will post up pic's as it goes along!
|
Re: My new build thread: Stage 4!
Started to reinstall fuel tank for temporary use. Looks like I have everything I need to put it back in. Got a nice box of stuff shipped in today from Wes at ClassicHeartbeat, sweet! Parts are starting to pile up nicely!
|
Re: My new build thread: Stage 4!
Well, just scrolled through all my cd manuals, looking for K5 fuel tank info. Found more info in my paperback 1970 Chevy truck chassis service manual, still it doesn't show the rubber sealant gaskets that mount to the bed floor. Anybody done this lately, got any pic's? My bed floor is almost gone in this area, but I saved some parts from the teardown, trying to set up for resto parts? Anybody know where I can pick up the bed floor to fuel fill tube rubber seals?
|
All times are GMT -4. The time now is 09:04 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com