Re: What did you do to your truck today?
 

i got the windshield back in and washed her. i started putting the dash back together. more in the morning.

http://i70.photobucket.com/albums/i9...2/IMG_4211.jpg

http://i70.photobucket.com/albums/i9...2/IMG_4212.jpg

http://i70.photobucket.com/albums/i9...2/IMG_4213.jpg

Re: What did you do to your truck today?
 

well i got the jalapeno general dump last night:metal: ,i know its not my year but i love this truck its a 1959 gmc on a s10 frame with a 4cyl(zero to 65 in a week) i didnt do the frame swap but a buddy of mine bought from a dude and i had to have it ,I spent some time fixin stuff on it last night i trimmed the inner fender wells, did some rewiring, installed the spindles and springs the rear block kit ,i am thinking on doing a s10 swap on my 61 sub, but with a v8

Re: What did you do to your truck today?
 

pat when did you get this!!!

Re: What did you do to your truck today?
 

nice , whats happend to the burb??




Hey Dino , i bought the burb in mid September from a Guy in Nebraska and the burb arivied 3 Weeks ago !
this burb is sick !!!!!

look here http://67-72chevytrucks.com/vboard/s...d.php?t=361897



Pat

Re: What did you do to your truck today?
 

I lost the Suburban in a divorce actually. A member on here bought it and is actually doing a build thread on it somewhere.

Re: What did you do to your truck today?
 

Cut a chunk out of my frame for the c-notch. Still gotta make the cuts on the other side and then weld everything up. There's just not enough time in the day.

But I also had to spend some time getting my new toy ready to race tomorrow('06 KTM 200XC). :bann:

Re: What did you do to your truck today?
 

And here I thought I was the only guy left on the planet that knew how to do tires the old way. I've had a manual bead breaker and tire spoons since I was about 14. There have been times I used a bumper jack or jack stand and floor jack to break the bead. It was sure easier before wheels with safety beads became standard. But of course that far back tires and/or inner tubes had a tendency to rust to the wheels! I don't suppose too many of todays tire store employees would even know how without all the power equipment.

Re: What did you do to your truck today?
 

Dinos63 Sweet truck man I love it!



Apache63 WOW man its lookin much better now that you have it! Looking good man real good!


Tx Firefighter That truck has came a Looooooong way man keep up the good work!



glendale Man i love your truck dude i wanna be a Copy Cat SSSOOOOOOOO bad lol that thing is sweet!

Re: What did you do to your truck today?
 

Dino you need a s10 frame I have one you can come and get. It's just a bare frame.

Re: What did you do to your truck today?
 

Re: What did you do to your truck today?
 

wow im glad i know plenty of people with tire machines and they will change my tires for free
my dad has two friends that have tire machines and my uncle owns a tire shop less than a mile away

Re: What did you do to your truck today?
 

Same here. Hand cleaner for lube. I built a fixture to use my shop press to break the beads though.

Re: What did you do to your truck today?
 

Re: What did you do to your truck today?
 

thanks cat i am good for now

Re: What did you do to your truck today?
 

Well I had high hopes for the day. I got my steel and I was going to cut and tack up my rear frame rails but a co-worker hit a gnarly weld with the band saw and rounded all the teeth over just before I was going to slide my 2x4 up in there to cut. So I set it aside and brought my bed back into the shop and welded up the bolt holes on one side for the 73+ fenders. Put some paint over the fresh grinds and put it back outside.

Re: What did you do to your truck today?
 

nothing major... but progress none the less...

fabbed a fancy spring spreader and bead blasted my hoods springs then powdercoated them. They came out sweet!! :metal:

Attachment 519554

Attachment 519555

Re: What did you do to your truck today?
 

1stseries55:

A creative solution to a common obstacle. Thanks for sharing.

When installing hood springs, I use a pair of Vise Grip long reach pliers, clamped closed, used as a hook on one end of the spring and stretch it in place. This prevents damaging the coating and allows you to get a good pull on the spring and stay out of harm's way.

Re: What did you do to your truck today?
 

That's uncanny. I have built similar spring stretchers for powdercoating hood springs. Some powdercoating guys can't weld and I can't really see how it would be possible to coat without the skill. Lots of little jigs and fixtures to hold various parts for coating.

Re: What did you do to your truck today?
 

i drove her to school today..she's my daily driver for the time being until the insurance cuts the check for my totalled neon. also came into the parking lot and in front of me was this little wimpy mittsibishi that was bagged on 20's.haha i let the side pipes do the talking as i rolled passed him and laughed!

Re: What did you do to your truck today?
 

Had redid my front brakes and mounted my new front tires the other day and installed the Kugel trans linkage. Took some pics tonite.

http://i395.photobucket.com/albums/p...0/100_1309.jpg

http://i395.photobucket.com/albums/p...0/100_1310.jpg

http://i395.photobucket.com/albums/p...0/100_1313.jpg

http://i395.photobucket.com/albums/p...0/100_1320.jpg

I think I will go with a narrow trim ring.

http://i395.photobucket.com/albums/p...0/100_1307.jpg

Re: What did you do to your truck today?
 

well it was actually yesterday...I guess midnight to 1 counts as today...
I replaced both box sides rear sill and tailgate on my 65.
pics are in the thread on my sig!

Re: What did you do to your truck today?
 

Bought 4 more 3Ton Jack Stands and moved my truck up 15 feet to make room in the Shop.
Yea.... a few bats came flying out everywhere:lol:
http://www1.bestgraph.com/gifs/anima...uve-sou-11.gifhttp://www1.bestgraph.com/gifs/anima...uve-sou-10.gifhttp://www1.bestgraph.com/gifs/anima...uve-sou-11.gif

Re: What did you do to your truck today?
 

I dropped my gas tank to change the sending unit and to my surprise, My tank is out of a boat.:crazy: I tore the sending unit apart and the po has tried to solder it to fix it. After two hours of calling and driving around town I ran out of luck. I got online and ordered one. I will post the company after I have it and know it works. The units for boats have a 35-290 ohm reading and is attached with a 5 screw pattern. At least I know I can take it to the lake :lol:
Attachment 519963

Attachment 519964

Attachment 519965

Re: What did you do to your truck today?
 

Installed a new Extang full tilt tonneau. Got it from Jegs. Good price and great shipping to Canada. Installed it at -10 ....yup I am Canadian.

Supposed to snow like crazy tonight so I am happy I will not have a box full of snow. Also looks great.

Re: What did you do to your truck today?
 

I dont have any pics but I scouted and found an engine for my truck an 08 gen IV and I think I will be using the stock wheels from sub the engine is coming out of

Re: What did you do to your truck today?
 

Good news, bad news

Good news: I finally installed my rear window.
Bad news: My truck got kicked out of the garage so my wife can park there.

I knew as soon as the window went in the truck went out. That's why I wasn't in any hurry. But it's been pretty cold (that's Bay Area cold) in the mornings latetly so I have to give the wife a break.

Next up. Get the heater working.

Re: What did you do to your truck today?
 

I had a 40' storage container delivered and set at my shop today. I spent the afternoon organizing parts in the container and making room for two restoration projects we are getting ready to start.

1. 1966 Chevy K10 lwb fleetside with factory running gear, 283 & SM420. This one will be named BIGRED66. I will start a build thread in a few days.

2. 1966 Chevy K20 lwb fleetside with factory running gear, 283 & SM420. This one will be named BIGBLUE66. I will start a build thread in a few days.

I will have high speed internet by tomorrow evening, so photos will no longer be a problem.

Re: What did you do to your truck today?
 

How much did that 40' container set you back? I need something like that....

Re: What did you do to your truck today?
 

I recently bought a couple different sets of late model center caps after seeing this done on the '67-'72 forum. I see you used standard lug nuts. How did you go about attaching them to the ralley's?

Re: What did you do to your truck today?
 

i installed my trim

Re: What did you do to your truck today?
 

Dam man sweet truck now i know what mine will look like if it was cream wich i was thinking about goin with.........

Re: What did you do to your truck today?
 

Well today just a min ago i got off work on the coldest day we have had all year so far and let the truck warm up to about 120 130 then took off.......................I got almost home and BOOM.................
Freaking smoke everywhere fluid and sounds all over I couldnt feel my gas pedal felt like it was gone MY HART DROPPED!!!!!

I just realized how much i really love this truck more than any other car or truck in my life!!!!

I was freaking out and sad at the same time plus a lil broke with 4 kids and Xmas around the corner ya freaking OUT!
Also cell phone dont work because phone wont charge my battery so i cant call anybody.......


Pulled over popped the hood cant see too much because its dark And people was passing me
Well lucky me a friend stopped and it seem to be that my new hose on top Popped off the rad and stat housing and was still under the hood so we drive & get water and clamps got it all on & full, then found out my pedal problem was some how the rod behind the pedal got pushed up and my pedal was laying on the floor so i popped it down stuck my pedal up and she started right up man o man what a night slash morning i just had scared the SHEEEEEET out of me!!!!!!



So that being said i put new clamps on my truck today and soon a reflush with better style hoses so i dont go threw this again!:smoke:





Sorry for the missed spelled words im tired and dont care :ito:

Re: What did you do to your truck today?
 

The Good news
My Drive line went to The Drive line service of Idaho to get shortened and balanced. NAPA has a new transmission detent cable ordered for me and should be here tomorrow.
The Bad news
It was a crisp 14*F this morning and I am having a hard time getting motivated to work on my truck in the cold!

Re: What did you do to your truck today?
 

sam all I did was o get a set of cheap black walls for my truck...tic toc till I tear it down it's just a matter of time before they salt the roads

Re: What did you do to your truck today?
 

About $90.00 per month or $2,500.00 to purchase outright. Best thing for secure storage of '60-'66 Chevy/GMC truck parts.

Re: What did you do to your truck today?
 

I started the Burb and let it run for about 20 minutes, let it get up to temp, get the moisture out of the exhaust. Once it starts to get cold she gets parked crossways in the back of the garage so I can get my driver inside, I hate scrapping ice. Plus the Burb has no heater so driving would not be so enjoyable in the Ohio winter. I've considered jacking her up, putting in gear and let the tranny get some heat. The danger factor has always won out so I pass on this. I can just see explaining to the insurance man how my stored truck drove thru the side of my garage.

Back on the Battery Tender waiting for spring.

Re: What did you do to your truck today?
 

Get some jack stands under it so there's compression on the suspension. Make sure it's stable & you'll be good to go for the winter 'maintenance' during hibernation.

Re: What did you do to your truck today?
 

My wife says I need to get 40' storage box for my truck!:lol::lol:

Re: What did you do to your truck today?
 

I put new ebrake cables on mine. I moved it out of the garage for a little better light. I was cutting it close on the second one. Man, I was worried I was going to be working in the dark AND cold! :waah:But...got her done!

kiknrocks, that's a clean looking truck!

Re: What did you do to your truck today?
 

New door checks.......what pieces of crap!! Had to fix new parts before installing them..........and sanded and sanded.