Re: My 50 roadster pickup build
2 Attachment(s)
Pic 1 back part of cab also painted same color.
Pic 2 steering column painted. I had removed the column shifter, patched and smoothed off. |
Re: My 50 roadster pickup build
2 Attachment(s)
Pic 1 Cab installed on frame for the final time.
Pic 2 Rearview. |
Re: My 50 roadster pickup build
3 Attachment(s)
I had forgot to mention that I had wet sanded and rubbed out the paint before putting cab back on.:confused:
Pic 1 Installing wiring for gauges, etc. Pic 2 Ron Francis wiring kit (I really like their product). Pic 3 Gauges all installed and wired up. |
Re: My 50 roadster pickup build
1 Attachment(s)
Exhaust came in from HPC, all coated inside and out, except mufflers, only on the outside for them.
|
Re: My 50 roadster pickup build
3 Attachment(s)
Pic 1 Installing exhaust, got new drive shaft, now it needs to be painted.
Pic 2 Gas tank in and exhaust showing at rear. Pic 3 Radiator mount and inner fenders installed. |
Re: My 50 roadster pickup build
i must say, this is one of the nicer builds i have seen on here....
do you have any links to more details of the top you are using on this? |
Re: My 50 roadster pickup build
1 Attachment(s)
Engine fired up on this day, and sounded sweet and strong.:ennyd:
|
Re: My 50 roadster pickup build
2 Attachment(s)
Pic 1 I had aready put down stuff from Lowe's on the floor and back of cab. Then I put down this insulation.
Pic 2 front view |
Re: My 50 roadster pickup build
1 Attachment(s)
This is where I mounted my AC drier, cooler here than inside the engine bay.
|
Re: My 50 roadster pickup build
Tomorrow we go back to some interior work in the cab, etc. See you then... Jim
|
Re: My 50 roadster pickup build
Is the "stuff from Lowe's" the rolls of roofing material?
|
Re: My 50 roadster pickup build
Quote:
|
Re: My 50 roadster pickup build
oldman3, Looking great, Can not wait to see the end product.
Shannon |
Re: My 50 roadster pickup build
Dont make it over on this side of the board much untill I saw this build, keep comming back to check this one out. Great build! thanks for posting your progress, it takes alot of time just to do that outside of the work your doing.
|
Re: My 50 roadster pickup build
Quote:
|
Re: My 50 roadster pickup build
Quote:
|
Re: My 50 roadster pickup build
Installing some of the interior pieces.
|
Re: My 50 roadster pickup build
1 Attachment(s)
Forgot the pic:dum::dum:
|
Re: My 50 roadster pickup build
3 Attachment(s)
Pic 1 Still working on the console area.
Pic 2 Cover for the column Pic 3 Bottom lower panel for dash, covered in leather. |
Re: My 50 roadster pickup build
2 Attachment(s)
Pic 1 Working on making up floor panels, they will also be a raised panel design like the console.
Pic 2 Another view. |
Re: My 50 roadster pickup build
1 Attachment(s)
All the cab panels are installed, and the seat.
|
Re: My 50 roadster pickup build
1 Attachment(s)
View looking into cab. Here the lower panel is also installed. All the floor panels are covered in ultra-leather. I use a home made mat when driving. Its some soft material sewn around some doorboard, nothing special.
|
Re: My 50 roadster pickup build
2 Attachment(s)
Pic 1 View of seat.
Pic 2 View looking up under the dash with panels installed. |
Re: My 50 roadster pickup build
1 Attachment(s)
Got dog house (front end) put back on.
|
Re: My 50 roadster pickup build
2 Attachment(s)
Pic 1 Got the hood, installed. Truck had been running for awhile, and I had been driving it up and down the hiway a few times. I couldn't resist taking this shot.
Pic 2 Front view. |
Re: My 50 roadster pickup build
2 Attachment(s)
Pic 1 Inside of door covered with airbubble insulation.
Pic 2 Getting ready to wet sand and rub out door. |
Re: My 50 roadster pickup build
1 Attachment(s)
Took pickup to local car show, won first place for underconstruction. I was like a little kid, happy as -ell.
|
Re: My 50 roadster pickup build
2 Attachment(s)
Pic 1 Inside of bed all rubbed out, ready to do final assembly.
Pic 2 A few days later, all wood, installed, bed mounted to frame, and showing the brake lights on. |
Re: My 50 roadster pickup build
2 Attachment(s)
Pic 1 Everything rubbed out here, getting pretty close now.
Pic 2 Front view. |
Re: My 50 roadster pickup build
That's it for today, tomorrow we will wrap up a few things, but still not done.
|
Re: My 50 roadster pickup build
oldman3, very very nice. I love the interior, with the under dash panel and the console. A great looking truck.
Shannon |
Re: My 50 roadster pickup build
Quote:
|
Re: My 50 roadster pickup build
oldman3, No, nothing new be back in the garage this week end. Finished building another bed box and had done a 1939 chevy deck lid (frenched license plate box, rust repair, body work and primer). So back onto the 1954 this weekend. So pictures this weekend.
Shannon |
Re: My 50 roadster pickup build
Jim, that thing sure turned out nice. Great work! (and lots of it)
|
Re: My 50 roadster pickup build
What did you use to build the interior out of? Looks like wood?
|
Re: My 50 roadster pickup build
Quote:
|
Re: My 50 roadster pickup build
Quote:
|
Re: My 50 roadster pickup build
1 Attachment(s)
Here I was using some thin metal to make up a templet for my splash cover.
|
Re: My 50 roadster pickup build
2 Attachment(s)
pic 1 Got tailgate rubbed out, in down position.
Pic 2 In the up position. |
Re: My 50 roadster pickup build
2 Attachment(s)
Pic 1 Still have plenty to do, glass, door panels, etc.
Pic 2 With top on, still needs to be covered. Pic 3 Another view. |
All times are GMT -4. The time now is 06:45 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com