![]() |
Re: 1965 chevy truck one piece @a time
4 Attachment(s)
It is home not much done on the truck over the weekend .got it home Friday
night had some thumbs up and some oh great looks from some of the nabors when i fires up the truck and unloaded it guess they didn't like there windows rattling from the the flowmaster with super 44's :lol: had to build a garden table Saturday for mom . Sunday moved stuff around and started the rework on the doors .. put the truck in the front of the shop and covered it and blocked of the front with plastic . so i guess its slowly going back together one piece @a time:chevy::metal: |
Re: 1965 chevy truck one piece @a time
So Cool!
I'm getting anxious for you. :) |
Re: 1965 chevy truck one piece @a time
I think yours look perfect in relation to the cab.
I guess there used to be 3" wider fenders available in fiberglass. They look just a little too wide for my taste; http://i1106.photobucket.com/albums/...soqlqkxwf.jpeg http://i1106.photobucket.com/albums/...sbytrlpcv.jpeg |
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
just a little update started working on the doors for the truck its just a little to warm to jet it done little by little . with it being 100 degrees out side but just a couple of pics
|
Re: 1965 chevy truck one piece @a time
Looking Awesome!!...What is the tire/wheel combyour using for the rears? they look great!...Keep up the good work.
|
Re: 1965 chevy truck one piece @a time
The tire and wheel combo is 15x12 rallies 9in back space
and the tires are 31x16x15 the rear end is from a 70 model chevy truck which is a little wider . and streached the fenders 1 1/2.. with the wider fenders I can go to a 14 inch wide mag wheel when i'm ready :metal::chevy: |
Re: 1965 chevy truck one piece @a time
Thanks for the info.I have a 65 fleet side and had thought about doing a set up like yours but wasn't sure what wld fit but i may need to go a lttle smaller. I love the look it has givin your ride and i'm digging the 572 engine...looks great!! keep going with it!
|
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
spent some time in the shop the last couple of days i finally got to start on the fenders it was still a little hot in the shop i took a fan home from work that i had to spend saturday nite and part of sunday to get working still need to get a new switch it it work on low but not on high. i should have never turned it back in .. Oh Well :waah: some of the work was from yesturday, the rest was from today .:chevy:
|
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
The stuff i P O R 15 the front bumper brackets the fender seal gasket mounts the in side of the driver and passager fenders and one small spot where the door panel had some rust spots where the panel covered just to keep it from starting again ..:chevy::metal:
|
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
just some of the finished P O R 15 pics :metal::chevy:
|
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
spent a little time in the shop today for some etch priming on the doors and then shooting some high build . will allow 24 hours to let it dry and cure .
then hope to get out there after work Monday to tape and the run the seam sealer on the doors and then prime it again . will see the First pics are the back of the bed shot a little black primer on it just un till i'm ready to tackle it fully . |
Re: 1965 chevy truck one piece @a time
4 Attachment(s)
just some of the door pics :chevy:
|
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
some more of the doors and a couple of fender date marks pass side is 2 of 65
the driver side really can't make out looks like a 1 but i'm not sure :chevy: |
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
ok the shops warmer than it is out side right now its 59 and cool last weekend it was 95 just wait it will be 90 Monday .
i did go out to the shop tonite and sprayed a little lite dusting on the doors to sand and get the doors prepped for seaming sealing tomarow :chevy: and the last is a teaser shot of the 1930 model A coupe its on the ground finally .ls3 6spd ordered the supercharger for it so we can get the final mock ups done then off to the paint shop :metal: |
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
seam sealed the doors this morning letting it cure for an hour then priming
them a gain :chevy: |
Re: 1965 chevy truck one piece @a time
4 Attachment(s)
:ito:
|
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
doors in primer going let it cure for 24 hours . did some some say football on
T V ?? food ball means :exit::barn::alc: with friends |
Re: 1965 chevy truck one piece @a time
4 Attachment(s)
coup;e of shots of the door and front panel did a little sanding on
not much this week |
Re: 1965 chevy truck one piece @a time
looking really good.
|
Re: 1965 chevy truck one piece @a time
2 Attachment(s)
Its been a while since my last post just been buzy and not able to play on the truck and when i finally got to today it was 36 deg out side ..
any way was able to spend time on the seat base on the passanger side had a little miss hap with a primer can while mixing and spatered primer all over every thing:banghead::cuss::m6: so thus sanding the seat base .. Too get them ready for paint and put in the truck. the driver side will be power and the pass side will be non power still looking for a center console ..:chevy:Attachment 1341351 Attachment 1341353 |
Re: 1965 chevy truck one piece @a time
4 Attachment(s)
:chevy:
|
Re: 1965 chevy truck one piece @a time
1 Attachment(s)
Your truck is looking awesome. I am most interested in the rear fenders. I am at the crossroad right now as to whether to widen the rear fenders or split the bed and widen it. I am leaning more towards the bed as it might be a little easier form me, but we'll see. I just set it on this past weekend for the first time to see how much and it looks like I am going to need about 5 inches total.
|
Re: 1965 chevy truck one piece @a time
Good progress! Double check your front caliper pin depth. I have had a compatibility issue in that area before and different pin lengths are available. From the outside shot it looks like the pins are barely inside the non-threaded side of the caliper. This could be very dangerous. Maybe you just hadn't tightened the pins yet in that shot?
|
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
just a little update been a crazy couple of months working and fixing the plumbing and painting stuff around the house but am still messing with the truck when i can . hope to get a good weekend in on the truck if the rains don't wash us away :lol:
did a little restoring on the delux controls when vintage are so can have a/c when it gets a little hot out :devil: |
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
more pics:metal:
|
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
:metal:
|
Re: 1965 chevy truck one piece @a time
4 Attachment(s)
last of the painted pics :smoke:
|
Re: 1965 chevy truck one piece @a time
2 Attachment(s)
:chevy:
|
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
preping the cab for re painting one more time
|
Re: 1965 chevy truck one piece @a time
:lol:
|
Re: 1965 chevy truck one piece @a time
1 Attachment(s)
just a few pics from what been going on :mm:
|
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
just been little busy with a couple of projects hope to get it to paint in a month or so finished the fenders and nose ready for paint working on a hood haven't found a good one yet but will see :uhmk:
|
Re: 1965 chevy truck one piece @a time
Nice truck, I like the widened fenders and big meats. And that motor! :metal:
|
Re: 1965 chevy truck one piece @a time
Any updates?
|
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
some of you guys are asking for updates the trucks at the paint shop getting
a coat of paint will have pics of the progress did have the rear move up do too lowering the truck & front and rear sway bars put on will try to keep a little better time updating ..:chevy: |
Re: 1965 chevy truck one piece @a time
Looking good!
|
Re: 1965 chevy truck one piece @a time
2 Attachment(s)
couple of more from when dropping it off to paint :chevy::metal::uhmk:
and yes that is a racing milk crate |
Re: 1965 chevy truck one piece @a time
1 Attachment(s)
:uhmk::chevy::lol:
|
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
Ok its been a while the truck was brought home from the painter after 7 1/2 months with out being touched so i brought it home.:banghead:
so ive started stripping the inside of the hood and getting it all ready to prime black and then ill paint the in side. unless i find a painter that can get the hole truck done in 4 months im going to hot rod it black and get it ready to drive in the spring :chevy: the doors and fender and the nose are ready for final sand for sealing and paint so will see what will happen . |
Re: 1965 chevy truck one piece @a time
Ouch, 7 1/2 months being held in paint jail.
Glad you got it back. |
All times are GMT -4. The time now is 01:44 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com