Re: Project '64 Cheapskate
I was gonna say, I'm surprised at how flat it was!
|
Re: Project '64 Cheapskate
I have been working on mounting the A/C condenser for the past couple of days, so I figured that I should post up the progress. I have an original condenser that came out of a parts truck, but it's so fragile that it feels like it's going to crumble when you pick it up. Plus, I am converting the system to R134, and I need an efficient condenser designed for the current refrigerant.
I was able to find a guy on Craigslist selling a condenser out of a 1999 Z06 Corvette, and after he rattled off the dimensions, I knew it was going to work perfect. Here's a picture of it sitting on top of the core support. The width and height is perfect, but the inlet and outlet fittings were going to be a problem. http://i222.photobucket.com/albums/d...psdcd88b6e.jpg http://i222.photobucket.com/albums/d...ps46b7d968.jpg So, I got out the cut-off wheel and commenced to cuttin' http://i222.photobucket.com/albums/d...psb45accb7.jpg I had some square tubing in my scrap pile and made some pieces to cover the removed areas and tacked them in. I also chopped off the original outlet line because it wasn't going to work for my application. http://i222.photobucket.com/albums/d...ps8fb4f563.jpg The stock Corvette mounting tabs were not consistent from side to side, so they got whacked. http://i222.photobucket.com/albums/d...ps884a9ee1.jpg http://i222.photobucket.com/albums/d...ps446beb18.jpg Grabbed some aluminum from the scrap pile and made new mount tabs and make my buddy Mike Jones TIG them in place. http://i222.photobucket.com/albums/d...ps74f13f71.jpg http://i222.photobucket.com/albums/d...ps92d6404c.jpg Fast forward a little, and I drilled the core support for the AC bulkhead fittings, and shortened and reshaped the dryer clamps. I chopped up some new fittings to accept hoses at the inlet and outlet lines and had Mike TIG them on. I installed the old mock-up dryer and started mocking up the lines and have a couple of the hoses ready to crimp. I still need to get a #10 female straight fitting for the inlet line at the top and cut the hose to length. The mounting tabs will need to be drilled for mounting bolts and rubber isolators. Once this gets done, I'll blow it all back apart and send it back to the sandblaster to get it touched up due to all the grease and oils from working on the condenser. After that, I'll do a little body work, and it'll be ready for primer and paint (chassis black). Speaking of black, everything you see on this core support will be painted black because I do not want to see anything behind the grill of the truck. I always think that it looks wrong when I see shiny stuff behind the grille or body-colored core supports. You have to hide that stuff! http://i222.photobucket.com/albums/d...ps13b14a95.jpg http://i222.photobucket.com/albums/d...ps553a43db.jpg |
Re: Project '64 Cheapskate
Man you always blow me away.
Wish I had some of the talent you have. So much great info here ALWAYS:metal: |
Re: Project '64 Cheapskate
Mad skills! AC scares me. Beautiful work.
Posted via Mobile Device |
Re: Project '64 Cheapskate
Good score on the condenser. Very sanitary job on this installation :thumbs:
|
Re: Project '64 Cheapskate
Looks awesome.
|
Re: Project '64 Cheapskate
This looks like my kind of adaption !!
Great work here, and your buddy Mike seems to really know what he is doing, those welds look real purty :metal: |
Re: Project '64 Cheapskate
Quote:
|
Re: Project '64 Cheapskate
Thoroughly impressed at your vision on this one. Great work!
|
Re: Project '64 Cheapskate
Will it cool faster since it came off of a Z06? :-) Cool stuff as usual!!!!
Posted via Mobile Device |
Re: Project '64 Cheapskate
I did something tonight that I have never done before. I rebuilt my steering box rag joint. I had been shopping around for a new rag joint, but them little suckers are spendy and I couldn't bring myself to pay $75 for a piece of rubber. So, I started shopping around and found that Borgeson sells a rebuilt kit for $16. It comes with the metal reinforced rubber disc and all the hardware. It was easy. I even wire-wheeled the parts and painted them, and I was done in less than an hour. I'm going to do these rebuilds from now on! Definitely a money saver.
The original grungy rag joint from my '79 Suburban donor. Pretty messed up. http://i222.photobucket.com/albums/d...psbb23fe72.jpg Here's all the parts laid out, cleaned up and painted, with the Borgeson kit (rubber disc and the hardware). http://i222.photobucket.com/albums/d...psf6c6100b.jpg Finished product. The bolts holding the reinforcement bracket on look mismatched, but Chevy used two different sized bolts to attach the rag joint to the column. The steering shaft was two different sized holes to match the different bolts. http://i222.photobucket.com/albums/d...ps7b1008eb.jpg I plan on finishing the steering box and column installation this weekend, and I'll post up all the details. |
Re: Project '64 Cheapskate
That's really kool.....and cheap.!
|
Re: Project '64 Cheapskate
Had a little time today, so I installed the steering box and tied it into the column, hopefully for the last time.
Clean and painted the steering box (1979 Chevy truck) and installed the rebuilt rag joint. The intermediate shaft is from the same '79 Chevy truck, just had to adjust the length a little to account for the different style of u-joint. http://i222.photobucket.com/albums/d...psdfa72bea.jpg The steering u-joint is a Borgeson that I got for cheap off of ebay. It's brand new, but the only problem (for me) is that it's a shiny one. I would have preferred a steel one that I could paint black, but for the price I got it for, I can't complain. The steering column is a bit of a "Frankenstein" concoction. I never cared for the stock steering shaft on the 60-66 GM trucks because it's a solid shaft from the steering wheel to the steering box and won't collapse in a crash. So, I took the steering shaft and the lower bearing retainer out of a '67 column that Brad had kept for parts, and with a little bit of effort, got it all to work. I changed out the lower bearing while I had it apart. Man, it operates as smooth as silk, and with the collapsable intermediate shaft, the column is much safer. http://i222.photobucket.com/albums/d...ps2f82a32f.jpg Next up: Install the master cylinder, prop valve bracket and prop valve, and start plumbing brakes. |
Re: Project '64 Cheapskate
I dig your work kat!!
|
Re: Project '64 Cheapskate
Aaaaack! Shiny parts! Looks good, putting things on!
Posted via Mobile Device |
Re: Project '64 Cheapskate
Quote:
Quote:
|
Re: Project '64 Cheapskate
It's been awhile since I posted. We're slammed at work right now, and it hasn't left me much free time. I did spend a little time getting the engine ready to drop in this weekend, so here it is, ready to drop into place. The trans is done, and they'll both go in together.
http://i222.photobucket.com/albums/d...psa3f2a5fb.jpg http://i222.photobucket.com/albums/d...ps98e9d715.jpg It's not as "nostalgic" looking as I would have liked, but because I plan to drive this thing everywhere, I wanted an engine that made good horsepower, and that I could go to any parts store to get parts for. By my estimation, it should make between 360-380 horsepower. BLOCK 1991 350 factory roller block (1-piece rear seal) HEADS Vortec heads, reworked the bowls and transition area, guides milled down for higher lift, 1.5 roller rockers, Comp springs CAM GM 846 hydraulic roller. .509/.528 lift, 222/230 duration @ .050, 112 lobe center. Advanced 4 degrees INTAKE Air-Gap CARB 750 Holley vacuum secondary HEADERS Sanderson, Cerma-Kromed ACCESSORY DRIVE Stock 1992, brackets sandblasted and tumbled in a ceramic bead tumbler. |
Re: Project '64 Cheapskate
Looks great! Glad to see you among the living!
Posted via Mobile Device |
Re: Project '64 Cheapskate
Quote:
Posted via Mobile Device |
Re: Project '64 Cheapskate
Sweet!
|
Re: Project '64 Cheapskate
Nice looking motor!
Do you have a part number for the serpintine belt? |
Re: Project '64 Cheapskate
Quote:
Quote:
Quote:
Quote:
|
Re: Project '64 Cheapskate
Sorry to hear about your furry friend. Always best to end their suffering. Hope you feel better soon.
Posted via Mobile Device |
Re: Project '64 Cheapskate
I'm sorry to hear about your dog. Our pets become our families. On another and happy note more updates. Killer looking motor man! I like updates. Keep'em coming.
|
Re: Project '64 Cheapskate
Wow, sorry to hear about your dog. I have two pugs that are getting old, about 12 years old now, and I am not looking forward to losing them. They are really good dogs, except for their shedding, aaargh.
|
Re: Project '64 Cheapskate
I hear ya about work. My place of employment always has such unnecessary drama going on. They promoted the PITA foreman and we got a new foreman. :crazy:Imagine that. Life is still not grand.
Sorry about the loss of your shadow. Wifey and I been talking about our Vomit Dog and when the time comes for her. gonna be sad Your motor is gonna look Freakin' gorgeous when you plop it in there. Be sooooo nice to motor around under its own power. |
Re: Project '64 Cheapskate
"Thanks! I don't have a part number because the belt that's currently on it is the old, original belt. I plan to get a new one and keep this belt under the seat as a spare, just in case."
Not a problem. If you think about it post the part number when you get a new belt. Sorry to hear about your dog. We went through that last summer. |
Re: Project '64 Cheapskate
Wow, that motor looks great!
Posted via Mobile Device |
Re: Project '64 Cheapskate
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
|
Re: Project '64 Cheapskate
Well, I don't have pictures to prove it, but the engine and transmission are installed. That was a big step, and it opens up a ton of stuff to do. The next step is to plumb the fuel lines, brake lines, and power steering hoses. After that, finish the bodywork and paint on the core support and the inner fenders and get them installed.
I'll post pictures soon. I chipped up the frame in a few spots during the install, so I need to get that handled before I take any glamour shots of the install. A HUUUUGE thanks goes to Brad for helping me tag-team the install!! |
Re: Project '64 Cheapskate
Was kind of a strange weekend. Was awesome to finally get the motor and transmission in the truck but the dog deal kinda knocked the wind out of the whole thing! Was happy and sad for Alex at the same time!
Posted via Mobile Device |
Re: Project '64 Cheapskate
Sorry to hear about your dog, Alex. I know how that goes; we had to do the same for our Weim last year. Definitely heart wrenching, for sure. He is on the first page of your '55 build for posterity, looking young and fit if it makes you feel better.
Cool about the progress on the '64. Keep it up one step at a time and the whole thing will be done before you know it. |
Re: Project '64 Cheapskate
Hooray! Big chunk progress! Always a good feeling! Gotta hurry up so Speed Racer can get down to business!
Posted via Mobile Device |
Re: Project '64 Cheapskate
I thought this was your "go to Lowe's" parts chaser? lol
....it's gonna be nice when it's "done". Projects are only done for me when someone else drives them away and I get a new one. It would be hard for me to let that 55' sit unfinished much longer. I bought a 63 parts chaser so I could get going on my 63 Nova convertible but it was too far gone to ever be nice. So I bought a 62 GMC that might be too original to be a parts chaser...:gmc2: ...dunno when I'm ever gonna start on the Nova now that I have 2 different truck projects:lol: I saw your pug a few times in the 55 build thread. Always sad to lose a pet. |
Re: Project '64 Cheapskate
Quote:
Yeah, the '64 is finally starting to come together under the hood. The drivetrain is the last "big" hurdle to clear, and after that, it's just a bunch of little stuff. It's getting there! Quote:
And I promise, when the '64 gets done, I'll be back on the '55. |
Re: Project '64 Cheapskate
Awesome!
|
Re: Project '64 Cheapskate
Looks great and I don't know how I missed that cam in the catalog. Sounds like it will be a great combo. Sorry about your dog. With no kids, my great dane is my daughter.
|
Re: Project '64 Cheapskate
I'm a little late....sorry to hear about your dog. It's definitely not an easy thing for us dog lovers. We had to deal with that in '08, and we've got another dog that could get to that point any time......not looking forward to that. I just keep hoping he passes in his sleep one night.
On a more positive note, that engine is looking good. I'm curious to hear what that cam sounds like in a 355. |
Re: Project '64 Cheapskate
Quote:
I know sometimes it's best to step away from it for a while until the inspiration returns. Judging by what you've already done to the 55 and the effort you are putting into this truck it's gonna be pretty awesome!:metal: Posted via Mobile Device |
Re: Project '64 Cheapskate
Well, Thank You Tommy!
I have to admit that I can sometimes have "Hot Rod A.D.D." I'll go like gangbusters on a project until I hit a snag and then I'll bounce off and attack another project. This '64 has been a real test of that, but I have made a promise to myself that I cannot start anything else until this one is done and on the road. At times, I feel like a dog in the "stay" position with a Scooby Snack resting on my nose, and I want that treat SO bad. I go to shows and my mind starts going wild, and the next thing I know, I'm on Craigslist looking for a certain car. I used to be really bad, but I've gotten better as I've gotten older. At one time, I was the King of Half-Finished Projects. I sold some killer projects, and sad to say, many of them at a substantial loss. One of these days, I will finally get around to restoring the one car that I've owned the longest. I bought a '71 Camaro RS back in '87, and it's been dry-docked since '89. Numbers matching (everything) from front to back, and it was the 3rd Camaro off the assembly line in the 2nd week of August in Van Nuys, California. Quite possibly the 1st RS Camaro built in 1971. It will get a nut and bolt rotisserie restoration, all the way down to the torque stripe paint and grease pencil marks. That project is going to be a blast. |
All times are GMT -4. The time now is 09:51 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com