Re: How about some pics of Static dropped 60-66
just got the bed on and took a quick pic. Front is 2 1/2" drop spindles with 1 lower coil springs, rear has 4" lowering coil springs.
http://i167.photobucket.com/albums/u...ps3efd75f3.jpg |
Re: How about some pics of Static dropped 60-66
Quote:
-nick |
Re: How about some pics of Static dropped 60-66
15x8, 235/75/15, I almost went with a bigger wheel. The rear is a non issue, my front may be an issue. Haven't been able to drive it around enough to tell yet but it's pretty close o the fender.
Posted via Mobile Device |
Re: How about some pics of Static dropped 60-66
Anyone else have driveshaft/pinion angle issues after adding 2 inch lowering blocks? The PO had already cut the springs, but it rode fine. Added the blocks over the weekend and the thing vibrates like hell now.
|
Re: How about some pics of Static dropped 60-66
At high speeds?
Posted via Mobile Device |
Re: How about some pics of Static dropped 60-66
Kind of all around. Most noticeably in 3rd. I have a 4 speed with granny low, so i start in second, which is a bit rougher feeling, but 3rd is awful. 4th isnt too bad, but still not like it use to be. When I let off in 4th going around 35 or so, it sounds like something is rubbing. Been under and checked, no ssigns of either driveshaft rubbing on anything.....
|
Re: How about some pics of Static dropped 60-66
3 Attachment(s)
wishy they were bagged!it comin very soon
|
Re: How about some pics of Static dropped 60-66
https://fbcdn-sphotos-b-a.akamaihd.n...45218985_o.jpg
Unsure of the drop... but looked and sounded awesome Posted via Mobile Device |
Re: How about some pics of Static dropped 60-66
It looks like on of those exaggerated drawings with the big wheels that you see on t-shirts. Not Ed Roth but the newer style.
|
Re: How about some pics of Static dropped 60-66
Quote:
Posted via Mobile Device |
Re: How about some pics of Static dropped 60-66
nice truck greg.like the big window.im debating whether i should convert my small window to big.i like both.
|
Re: How about some pics of Static dropped 59-60-66
2 Attachment(s)
Here's my project, before and after...getting her layed out in 2 weeks...
Front: dual-flex posie drop springs with a 3" drop axle Rear: Flipped axle with 3 leaf springs removed from the leaf pack Aim: 5" drop for the front and 7" drop to the rear Before: http://67-72chevytrucks.com/vboard/a...1&d=1366946379 After: http://67-72chevytrucks.com/vboard/a...1&d=1366946379 |
Re: How about some pics of Static dropped 60-66
Looks great! what size and brand wheels and tires are you running?
Posted via Mobile Device |
Re: How about some pics of Static dropped 59-60-66
I confused is that second photo with the 5/7 drop already done or is that photoshoped? If that is a 5/7 drop I hope you do not have any pot holes or speed bumps in your town. It must be photoshop because you have no frame rail behind your back tire only grass. That looks lower than 5/7.
Quote:
|
Re: How about some pics of Static dropped 60-66
I've got a stock set of front springs and a set of jeep tj springs for the rear. How many coils do I need to cut off the stock fronts to make my truck sit level with jeep springs in the rear?
Posted via Mobile Device |
Re: How about some pics of Static dropped 60-66
Forest, that's a photoshopped pic. I know I won't be sitting that low but just got everything ordered from Sid so I'm excited. She should be done in about a month.
Apologies for posting on here, just realized it wasn't for 59's but it's a great forum! MR |
Re: How about some pics of Static dropped 60-66
Anyone have a pic of a 2-3 drop? Got a set of 3" rear springs coming, and thinking about ordering some 2" for the front.
Posted via Mobile Device |
Re: How about some pics of Static dropped 60-66
Quote:
|
Re: How about some pics of Static dropped 60-66
|
Re: How about some pics of Static dropped 60-66
Quote:
|
Re: How about some pics of Static dropped 60-66
trucks looking good txrat.
|
Re: How about some pics of Static dropped 60-66
I really like your interior, is that a tilt column or do you have to bend your head down to see the tach? It's almost like you could glance at the speedometer and co-witness the tach at the same time, I like it.
You should get some gauges that match the tach to replace the dummy lights, that would be perfect, plus it'd get rid of the add on gauges below the radio and clean everything up. Love the stance of your truck too. |
Re: How about some pics of Static dropped 60-66
1 Attachment(s)
Cpp notch in, disc brakes done, 3 in drop spring front, 2 1/2 drop spindle, 5 in rear drop spring, 2 in block, 235/75/15
Posted via Mobile Device Posted via Mobile Device Posted via Mobile Device |
Re: How about some pics of Static dropped 60-66
1 Attachment(s)
Posted via Mobile Device
|
Re: How about some pics of Static dropped 60-66
thanks for the comments. it is the factory non tilt steering column. i have no issues seeing the tach sitting normal (i am 6'0"). i am saving for the Fastlane west dash to eliminate the under dash gauges the PO installed. as for the stance i am debating on bags or staying static.
Quote:
|
Re: How about some pics of Static dropped 60-66
1 Attachment(s)
Posted via Mobile Device
|
Re: How about some pics of Static dropped 60-66
Quote:
Also, nice truck Sin Cal 66! |
Re: How about some pics of Static dropped 60-66
Thanks!
Posted via Mobile Device |
Re: How about some pics of Static dropped 60-66
Quote:
|
Re: How about some pics of Static dropped 60-66
McGaughys 4.5x6 lowering kit. Stock wheels and tires.
Posted via Mobile Device |
Re: How about some pics of Static dropped 60-66
4-3 Drop. Cut Coils all the way around.
https://sphotos-a.xx.fbcdn.net/hphot...54561104_n.jpg https://fbcdn-sphotos-g-a.akamaihd.n...48888869_n.jpg |
Re: How about some pics of Static dropped 60-66
2 Attachment(s)
Quote:
I just finished mocking it up on my 62 C10 and would like to know more before I proceed with eliminating tank in cab. 9 1/2 inches to the ground with body off seems close - likely clearance issues for actual drivability. Thank you - rg |
Re: How about some pics of Static dropped 60-66
2 Attachment(s)
First pic is where I started on Saturday, and second pic is where I ended up.
1st one is all spring 3/5 drop. 2nd one is with 5/5 drop with 2" spindles added up front. |
Re: How about some pics of Static dropped 60-66
1 Attachment(s)
61 apache 10
|
Re: How about some pics of Static dropped 60-66
2 Attachment(s)
Just got the bed back on to see the actual stance with the drop. 3/5 cpp coils.
|
Re: How about some pics of Static dropped 60-66
2 Attachment(s)
[attach]Attachment 1116747[/attach]
|
Re: How about some pics of Static dropped 60-66
1 Attachment(s)
Love your truck. Nice and clean. What I'm looking to buy.
|
Re: How about some pics of Static dropped 60-66
Hey guys new to the board and trying to post some pics any advice? thanks
|
Re: How about some pics of Static dropped 60-66
1 Attachment(s)
trying to post more pics...whats a token?
|
Re: How about some pics of Static dropped 60-66
2 Attachment(s)
Posted via Mobile Device2" blocks in the back, and 1.5 cut coils in the front.
Posted via Mobile Device |
All times are GMT -4. The time now is 09:42 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com