The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   projects and builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=197)
-   -   Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO! (https://67-72chevytrucks.com/vboard/showthread.php?t=585901)

Ta2Don 02-02-2014 05:35 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside BILLYBOB
 
1 Attachment(s)
If your computer is working normally for everything else… PotatoBucket is asking for a Hammer fix...:haha:

Great Photos… I vote for this one...:metal:

McMurphy 02-04-2014 03:27 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside BILLYBOB
 
Using a tripod, and either a remote trigger or the timer function on the camera itself, will increase the clarity of the photograph by 50%. Most people dont realize this applies to digital cameras as well.

I personally like them all, but I thougth the first one, in the driveway, was the clearest, and had the very nice color contrast between the truck and the vegetation to look appealing up close and far off.

Nicely done sir !!

Grizz1963 02-04-2014 07:13 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside BILLYBOB
 
Quote:

Originally Posted by McMurphy (Post 6507792)
Using a tripod, and either a remote trigger or the timer function on the camera itself, will increase the clarity of the photograph by 50%. Most people dont realize this applies to digital cameras as well.

I personally like them all, but I thougth the first one, in the driveway, was the clearest, and had the very nice color contrast between the truck and the vegetation to look appealing up close and far off.

Nicely done sir !!

Thanks for the comments Michael.

Photos taken with iPhone, so far from ideal.

I am still looking for that perfect setting..... I love graffitti walls.

I will take my digital camera when I go out again.

Grizz1963 02-04-2014 07:13 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside BILLYBOB
 
Nicola's birthday on the 5th Feb.......... SOOOOOOOOO....

Well, because we are both out to work early tomorrow, we decided that tonight would be cards and prezzies.

http://i294.photobucket.com/albums/m...psb456d448.jpg

She got loads of nice cards and prezzies from friends and family.

Then I went upstairs and dug out the prezzies I had gotten her. (She had asked for a ring, which I bought in December)

YES, I KNOW....... Christmas paper, but it was all I had.

http://i294.photobucket.com/albums/m...psa969b26c.jpg

She liked my card, then the specialist book on smoking pipes.

I had a set of 5 pipes I had bought from America last year, and a ladies leg pipe bought for way too much recently (but I know she can sell it for double or more) The ladies leg was one of three fantasy pipes which included a revolver pipe and a family pipe that she always coveted..... so now she has three of her dream pipes.

http://i294.photobucket.com/albums/m...ps15509a04.jpg

Lastly she opened the box with the Celtic Cross.

I am pleased to report that she was speechless.

When I asked her, she just said that she was gobsmacked that I had created the cross for her.

http://i294.photobucket.com/albums/m...ps3fc05752.jpg

And a piccie posed for all of you out there.

http://i294.photobucket.com/albums/m...ps02209db3.jpg

I guess as they say "RESULT !! "

ChrisDollins 02-04-2014 08:02 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside BILLYBOB
 
Quote:

Originally Posted by Grizz1963 (Post 6504362)

Such a good looking little truck! The red really pops in this one.

Chris

Grizz1963 02-12-2014 05:30 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside BILLYBOB
 
Quote:

Originally Posted by ChrisDollins (Post 6508243)
Such a good looking little truck! The red really pops in this one.

Chris

Thanks Chris, I like that one too, but the dark side could have done with more sunshine.

Grizz1963 02-12-2014 05:31 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside BILLYBOB
 
Well, tonight is probably one of the biggest score reports (with a twist)

I replied to a Freecycle offer for a broken Acoustic guitar which I want to turn into a floor lamp, with a light fitting inside and low wattage bulb.

http://i294.photobucket.com/albums/m...ps203c2218.jpg

Guitar needs some repairs and bits added from my spares pile.

Then mounted on a decent wooden base and given to my daughters boyfriend who plays rather well.

When I replied to the offer, I did mention to the guy offering that I was only interested if nobody wanted it, as I was going to "re-purpose" it, which intrigued him.
So when he replied, he also offered me a 5 foot electric metal working lathe that comes with thread cutting gears etc.
I only took one pic tonight with my mobile phone in the shed as there was not much light in the shed where it is stashed.

I immediately decided to offer it to my mate Martin's neighbour Trevor who works in a machine shop and is busy setting up his own shop as he gets to buy in machines.

http://i294.photobucket.com/albums/m...ps71a037a3.jpg

Possibly my best ever score, and really cool to be able to offer it to someone else.

I am also in the process of collecting bits to build a replica petrol pump and bought this nozzle off Evilbay last weekend.

Paid £45.00 which was way more than I had planned.

Nicola's brother is bringing me a fire hose reel and hose which will make the pipe red, and kind of direct the direction of the final product.

http://i294.photobucket.com/albums/m...psa7cb270a.jpg

I am looking at combining a few bits I have into something "unique"

I am looking for a LARGE white glass lampshade like in the pic below.

Went to a reclamation yard today on the way home, but they could not help.

Any guidance appreciated.

If you have a plain old petrol pump globe, or even one with graphics on to sell, let me know by PM.

http://image.made-in-china.com/43f34...hade-Bo400.jpg



These are some of the bits I have collected so far......

M&S Christmas decoration in steel - £1.50

http://i294.photobucket.com/albums/m...ps62d12721.jpg


I also have this which is missing a side but has a locking door.

http://i294.photobucket.com/albums/m...ps308fc904.jpg

Now start by making the steel cabinet shorter, add the star to the front of it somewhere, add a globe with some fantasy brand on top, add a front face with numbers etc and add the pump nozzle and a length of old red fire hose to it...... get the picture ??

Something like this on the front.

I have ordered one from Ebay and will add some clear perspex or polycarbonate to it.

http://i294.photobucket.com/albums/m...ps1e528914.jpg


Now.... fit a small compressor inside and mount the whole thing outside the garage to use for tyres and blowing stuff clear.

Grizz1963 02-12-2014 06:20 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside BILLYBOB
 
My number plate collecting continues, although I do try to find unusual ones, and some specialist plates like disabled, army, fire dept etc. I also still do not have a British Army plate in my collection.

Today a few came in from Arizona from Nic who happened to see my collection on a thread.

All of these are cool as they are different to anything I already have.

http://i294.photobucket.com/albums/m...ps034394fe.jpg

Also still looking for "Arabic" type plates.

niterider65 02-12-2014 10:01 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside BILLYBOB
 
Quote:

Originally Posted by Grizz1963 (Post 6504362)
Well, it is winter, and we have had the wettest January since 1909 when records were begun.

Today Nicola and I decided to take the truck out for a decent run as we both have a bit of cabin fever, and deliver mate Martin the latest copy of Classic American (we subscribe to different mags and swop after reading them)

So we made a few stops at Chatham Dockyard where we were chased away by security........

Then off to the yacht basin to get a few pics.

I have been looking for a decent photo of the truck to enlarge to about 1200mm X 1500mm for my study, to replace the Super Hero wall I have there at the moment.

Not sure if any of the pics I ended up keeping really make the grade. I may have to look for a better setting at some point.

So please give your opinions too.

http://i294.photobucket.com/albums/m...psf92ef065.jpg

http://i294.photobucket.com/albums/m...ps1289b5be.jpg

http://i294.photobucket.com/albums/m...psacf71f36.jpg

http://i294.photobucket.com/albums/m...ps4a5766af.jpg

http://i294.photobucket.com/albums/m...ps7182816b.jpg

http://i294.photobucket.com/albums/m...ps53dabf12.jpg

http://i294.photobucket.com/albums/m...ps3c6d6c98.jpg


http://i294.photobucket.com/albums/m...psebdc95c7.jpg

So there went another weekend.

Frustrating PotatoBucket !!!

Turns pics about.

No idea how to overide it, tried rotating in files.

Last try

http://i294.photobucket.com/albums/m...ps3035a872.jpg

Looking good like the pics of the truck in the ship docks :metal:
looks a little cold there across the pond can't wait to see more
keep up the great work .

Grizz1963 02-13-2014 05:26 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside BILLYBOB
 
Update.

Together with the spares donor

http://i294.photobucket.com/albums/m...ps04218f23.jpg

20 watt bulb fitted.


http://i294.photobucket.com/albums/m...psd101afc2.jpg

Needs more work to be done, small holes closed up and strings fitted.

http://i294.photobucket.com/albums/m...psd517dac9.jpg

Ta2Don 02-13-2014 10:27 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside BILLYBOB
 
Such Creativity!!! :metal::metal::metal:

Grizz1963 02-14-2014 07:49 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside BILLYBOB
 
Woken by Nicola this morning, as she found these two fire hose reels at the front door and could not move them.

Deposited by her brother for me to use as I see fit, they were meant to go onto a boat, but the capacity is too small, as the boats use 2 1/2 inch hose and equipment. Been in their skip pile a few years now.

Anyone else need some hose, or even a whole reel ? Drop me a PM please.

I will use about 6-7 meters only in the petrol pump build.

http://i294.photobucket.com/albums/m...ps6ef8106f.jpg

Wondering what else I can do with the rest of the hose, not sure if I should run some down the side of the property down to the garage to have permanent water down there.

Sure some idea will spring to mind.

Grizz1963 02-14-2014 11:00 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside BILLYBOB
 
I suddenly seem to be elbow deep in little projects.

Probably a good thing with all the rain that has been falling in the UK and it seems there is no end in sight.

So any outside work on the truck is on hold till further notice.

Received this in the post today from Ian, (BIAS on Retro-Rides) after he had to go fetch it back from his skip bin.

The old grille from his 1992 Jaguar XJ40 Sovereign project car and daily driver.

Thanks mate.

Plan is to tap out the dents in it, get some diamond mesh in stainless or steel, paint it satin black and fit in the holes like a Bentley grille.

http://i294.photobucket.com/albums/m...ps2fd5ef91.jpg

The plan.....

http://www.300cforums.com/forums/att...lle-grille.jpg

Ian's car.

http://i627.photobucket.com/albums/t...ps4df92555.jpg

http://i627.photobucket.com/albums/t...ps7ea47fcd.jpg

I love the look of this car.

Ta2Don 02-14-2014 11:19 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside BILLYBOB
 
Quote:

Originally Posted by Grizz1963 (Post 6525293)
Woken by Nicola this morning, as she found these two fire hose reels at the front door and could not move them.

Wondering what else I can do with the rest of the hose, not sure if I should run some down the side of the property down to the garage to have permanent water down there.

Sure some idea will spring to mind.

Sure you will come up with something...:uhmk:

Looking forward to the Grille, and the Jag is sporting a Sweet Stance!!! :metal:

Grizz1963 02-22-2014 02:19 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside BILLYBOB
 
Anyone build a motorized BMX lately??


I am never sure if I should apologize for the stuff I dig out or tell you guys about the silly grin it puts on my face.

Pulled this out of a skip a few months ago. No other parts, so no pull string or safety cover etc.

Today I had some time to clean up the garage and thought I would see if a trick I saw about 25 years ago when my cousin used to start his lawnmower that was missing its pull cord, with a socket and a power drill.

Found the right size bolt, ground it roughly triangular so it would not slip in the chuck, and did exactly what you see in the video clip below.

BOOOOM !!!!

Now playing around with the idea of seeing if I can find a free BMX bike to attach it to.

Not sure if it really has the power to pull anything but a 6 week old monkey about, but should be more noisy than cardboard in the spokes (remember that??)

Video link below.


Any advice appreciated.

And yes, I know putting it back in the skip is the best advice, but where would the fun be in that??

Next up..... Chainsaw bike??

Going back to the garage to finish the guitar floor lamp now.

Some of my other Skip or Tip Treasures in this thread:

http://www.retrorides.proboards.com/...pdated-22-2014

Sometimes old stuff can be a lot more fun.

Grizz1963 02-23-2014 09:02 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside BILLYBOB
 
Last two days the yruck has actually worked and done about 90 miles.

Moved our daughter out of her flat back to her fathers as she is going traveling from April before she starts looking for a job as a radiographer.

Best part was her squealing like a todler when I spanked the truck.

Today we went over to Essex to say goodbye to friends who are moving back to South Africa after 15 years in the UK.
I got a load. Of shelving and unused 2.4m decking boards from Dirk, as well as some ally ladders and other wood.

As often is the case, I forget how much of an impression the truck makes on the road with pointing, hooting and friendly waving wherever we go.

Have I mentioned that I love my truck?

clemdaddy 02-23-2014 09:18 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside BILLYBOB
 
Have I mentioned that I love my truck?[/QUOTE]

you should love it, its beautiful. i love it too.
is it time for patch panels?

markeb01 02-23-2014 09:34 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside BILLYBOB
 
The variety of your side projects is always interesting or amazing. I can copy stuff easily, and perhaps even improve on the design. But I just don't have the imagination for all the stuff you repurpose. It's really fun watching! Thanks for continuing to show these diversions.

Ta2Don 02-23-2014 09:46 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside BILLYBOB
 
Drill works better than a rope...:metal: Can't wait to see what you come up with.
May try to Skype later… My Electrician friend is coming out to the farm to look at the compressor!:uhmk:

Cheers!:cf::truck::cf:

Grizz1963 02-23-2014 02:28 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside BILLYBOB
 
Quote:

Originally Posted by clemdaddy (Post 6539770)
Have I mentioned that I love my truck?

you should love it, its beautiful. i love it too.
is it time for patch panels?[/QUOTE]

Welder is borked..... see response below.

Quote:

Originally Posted by markeb01 (Post 6539785)
The variety of your side projects is always interesting or amazing. I can copy stuff easily, and perhaps even improve on the design. But I just don't have the imagination for all the stuff you repurpose. It's really fun watching! Thanks for continuing to show these diversions.

;););););)

Thanks Mark, I guess it is the result of a misspent youth.

And a bit like sportsmen, the more you practice, the better you get.

I just tend to see more function in stuff. Maybe also being South African, we tend to use stuff till the life is completely out of it.

I look up to guys like you and McMurphy and various others on here and just shake my head at your skills and abilities.

Quote:

Originally Posted by Ta2Don (Post 6539792)
Drill works better than a rope...:metal: Can't wait to see what you come up with.
May try to Skype later… My Electrician friend is coming out to the farm to look at the compressor!:uhmk:

Cheers!:cf::truck::cf:

Been offered a couple of old BMX bikes already, still got to figure out getting the power onto the back wheel, friction or power gear??

Grizz1963 02-23-2014 02:29 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside BILLYBOB
 
Parked up yesterday before being loaded up with furniture.

http://i294.photobucket.com/albums/m...ps35996f0c.jpg

Now a call out for all genius types.

My welder has gone through about 2.5kg of welding wire.

A few weeks ago while welding it tripped out, I thought overheating, and carried on with the stick welder as it was not a finesse job.

Then a while later I started it up again, planning to do some practice welds on steel plate, for when I started cutting and welding he trucks rust...... switched it on, and at the first arc I struck the welder died again.

Checked the fuse etc..... all seemed fine.

Any ideas ?

http://i294.photobucket.com/albums/m...ps7b519c0c.jpg

So another weekend comes to an end.

Ta2Don 02-23-2014 10:26 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside BILLYBOB
 
Don't claim Genius status, but when my welder died, I checked the overheat switch, then searched for a fuse… Overheat switch checked out OK…No fuse to be found… finally found a burnt circuit on the circuit board...:bang head: Attempted to repair… and as soon as the machine was switched on:ack: FIREWORKS!!! No replacement circuit board available… so I wound up buying a new machine… Hopefully you will track down a faulty switch or fuse...

Grizz1963 02-28-2014 12:54 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside BILLYBOB
 
Thanks for all the replies guys.

Last night I removed the plug, cut about 2 inches off the cable, refitted and replaced the 13A fuse.

Plugged it in, the cooling fan came on, no light behind the power switch.

I then welded about 300mm on some plate and other than having to set the feed, power etc. I just need to practice loads so that I get the patch panels right first time around.

On the way home yesterday I stopped by in a welding shop, and bought my birthday present from Nicola...... £48.00

http://i294.photobucket.com/albums/m...ps44d216d6.jpg

Should help with cutting and grinding.

Mate Martin will be around later for pizza, porn and probing my welder with his tester. Hopefully he will find all is fine.

Looking forward to the birthday prezzie he got his boss to bring back from Thailand.
When I went there a few years ago, I could not get a plate.

He had some new ones made, and the used one comes from his Ford Escort he is having rebuilt in Thailand.

http://i294.photobucket.com/albums/m...ps4c5a47f6.jpg

Nice addition to my collection.

Grizz1963 03-02-2014 04:47 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside BILLYBOB
 
Went to the NSRA Swapmeet in Essex today.

Collected my Wheel Vintiques Chrome smoothies and bought a pair of hubcaps for £20/pair which is less than half price.

http://i4.photobucket.com/albums/y13...illybob282.jpg

Now need a new pair of wheel adaptors made up, then find white wall tyres and get it behind the Chevy truck.

Very pleased tonight.

Got a call from (Gary) who collects wooden hotel and commercial clothes hangers..... he had me a Liberian plate.

I also managed to buy a Belgian plate and got an old English plate for trading.

http://i4.photobucket.com/albums/y13...illybob283.jpg

Ta2Don 03-02-2014 07:47 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside BILLYBOB
 
Wheels… SCORE!:metal:

Grizz1963 03-08-2014 04:31 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside BILLYBOB
 
Quote:

Originally Posted by Ta2Don (Post 6553971)
Wheels… SCORE!:metal:

Indeed, now just need adapters made to get the wheels onto the GrizzPod, get new tyres fitted...... so spending about £400.00 just to make it look good behind the truck. MAD MAD MAD.... but doing it anyway.

Off to Whitstable today in the MX5 with Nicola driving to pick up a half size empty Argon/CO2 bottle to refill so that I stand a better chance of not messing up completely when I start welding up my trucks sheetmetal. :chevy:

Grizz1963 03-08-2014 04:35 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside BILLYBOB
 
Right, thanks to mate Martin for getting them at some of the job sites he worked this week, I have on offer, as I know that I am not the only one here......


Some good British/English plates FREE to you guys.

If you want to trade or send out a plate/s, that would be awesome. (but not a prerequisite at all)

The only stipulation is that you pay the full Postage via Paypal including Paypal costs.

You could not fly out here for the price of postage if you wanted some alternate garage/shed wall hangings.

PM if you are interested in having something different.

Just to mention again, I love the weird, unusual, used rather than newest.

If anyone wants to make my day, military, army, government etc does it for me.

That said, these are still available "free" at the cost of Postage fully paid via Paypal.

PM please and mention what plate/s you want.

There is some double sided tape stuck to some, but it peels off easy.

There are a few dealer plates like the Fiesta, KA plates.

Also at the top, there are two unused, still with protective film on them.

I also have 4 of the same one that reads A11 VAL which would have been someones "personal plate" available.

There are 4 as you can see which have the dealers details on the bottom.

Lastly, in the UK, front plates are white, and rears are yellow.

The plates denote year of registration, so 10 is 2010 and 13 is 2013 however, 54 would be 2004 and 57 would be 2007 and then to make it more interesting 63 would be 2013 ........ confused yet ??


http://i294.photobucket.com/albums/m...ps035e0c88.jpg

Grizz1963 03-08-2014 03:19 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside BILLYBOB
 
Great surprise when I got home today.

Post man was here....

Envelope from Georgia containing some number plates for my collection.

Specialist plate Historic Automobile, and also the Bahamas plate.


http://i294.photobucket.com/albums/m...ps324bd593.jpg

BUT THE BEST WAS TO COME OUT THE ENVELOPE.

An original December 1965 Chevy C10 brochure from Todd Scott. Thanks Buddy !!

http://i294.photobucket.com/albums/m...pse88117fb.jpg

Grizz1963 03-09-2014 06:26 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside BILLYBOB
 
As part of my practice to get ready for the trucks mini-weldathon and because I can....

I have wanted to build a retro style fuel pump for my drive outside the garage for some time, as I cannot justify paying the prices charged for "patina'd" pumps.

I started a few threads on various forums as I was hoping to get a plain white globe to fit on top, but it has become obvious that they do not come cheaply, so I am onto plan "B" now, which will not include a glob on top.
http://www.retrorides.proboards.com/...ss-light-shade

£950.00 for this is fine if you have loads of disposable cash and little distinction of value.

Seen last weekend at the NSRA Swapmeet.

http://i294.photobucket.com/albums/m...ps78ed3294.jpg

This one was already sold at £950.00

http://i294.photobucket.com/albums/m...ps7aa4b3e4.jpg




Bought this at the NSRA Swapmeet for £5.00 a Bargain, and once distressed and stripped of modern plastics, it should look the part.

http://i294.photobucket.com/albums/m...psb475a1b4.jpg

Paid about £42.00 including postage for this one on Evilbay, waaaay too much, but what they go for sometimes.

Still need to decide which one to use, or if I want to make a double sided pump with two nozzles.

http://i294.photobucket.com/albums/m...psa7cb270a.jpg

Nicola's brother works in Suriname most of the time, managing a fleet of dredgers and tugs that work on the rivers.
When he heard I wanted to find some hose for the nozzles, he offered me a whole new, unused fire hose reel.
The next morning Nicola who did not know they were coming, called me in a panic, he had dropped off two, one of which has since found a new home.
I will be using some of the red hose, which will dictate at least in part my colour schemes.

http://i294.photobucket.com/albums/m...ps6ef8106f.jpg

Bought a complete vintage petrol pump face sticker off Evilbay, about £6.00
It will be made to fit inside some perspex, hopefully taken from an old caravan window.

http://i294.photobucket.com/albums/m...ps1e528914.jpg


About 6 months ago Nicola had a clearout at the funeral home she works at, but this broken locker did not make it into the skip.
So about 5 weeks ago I went down to fetch it in the Chevy, loving to make the truck work.

http://i294.photobucket.com/albums/m...ps308fc904.jpg


Last year Mickey had to remove a display unit from a Tony & Guy hairdressing boutique and dump it, but before he did, I removed the white steel sides which had a nice curve on them and were of seriously thick steel as they were structural. At the time I had no specific purpose for the pieces, but knew it was only time......

Today I started to prep the steel and the locker.

http://i294.photobucket.com/albums/m...ps8217277c.jpg

Using a 1mm cutting disc, I removed the 90' lip on all of the sections from the hair salon.

Then I cut them to size as I want my repro pump to be 5 foot tall. The plan is to use these sections to make the front face of the pump rounded with a raised section for the clock face etc.

http://i294.photobucket.com/albums/m...ps25c0d213.jpg

Lastly, I butt welded the plates together, leaving the front face unwelded, a minimal skim of filler will sort the joins in the end.

Next up, I need to make up a complete front frame, fill in the open space and cut the cabinet down by about 6 inches, not much I know, but it will be right then.
I also need to weld in a bit of strengthening to the cut down door.
Once made up, I need to find a small vertical compressor to fit inside so that I have a compressor on the drive.

Done for today..... two 5 foot sides and a 3 foot length that needs to be cut in half to make a top and bottom section.

http://i294.photobucket.com/albums/m...psd7c23f58.jpg

I am also going to look for bits of old car or refrigerator/cooker trim to use on the front and sides of the pump to embellish it a bit, giving it a bit of an Art Deco feel.

I will leave you with this, a metal star we bought after Christmas 2012 in the sales.... I knew it would come in useful some time.
Now it will form part of my non existent "Star Brand" fuel logo.

Any ideas and advice welcome.

http://i294.photobucket.com/albums/m...ps62d12721.jpg

Grizz1963 03-09-2014 06:27 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside BILLYBOB
 
Thought I would add this in because I was pleased with the result.

Nicola's mum passed away early in January.
She was always a keen gardener and over the years also rescued many animals.

She had a small statue of St Francis of Asisi in the garden and when she died, it came home with us.

http://i294.photobucket.com/albums/m...ps19e544fa.jpg

I had walked around with the idea of making a small shelter for him to stand in, in the garden.

This morning I popped down to the local pub who always has a pile of wood from fencing jobs waiting for the next bonfire. So I fetched a few old weathered feather boards.

http://i294.photobucket.com/albums/m...ps8543bd32.jpg

I also grabbed some 12mm ply from the garage and cot some to shape, making it up as I went along.

http://i294.photobucket.com/albums/m...ps397bfd89.jpg

Knocked up a nice AA road patrol house for St Francis.

Also cut out a Cross on the bandsaw to fit inside the shelter.

http://i294.photobucket.com/albums/m...ps412fc1a7.jpg

Once completed I posted him out on a bit of railway sleeper in the garden so he can keep an eye on everything.

http://i294.photobucket.com/albums/m...ps0c0900f1.jpg

Nicola was happy.... she also cooked me dinner.

Ta2Don 03-10-2014 11:18 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside BILLYBOB
 
Looking forward to the pump project progress...:metal:

So… did Martin pick up one of the pricey pumps???:haha:

mjh1965 03-10-2014 12:35 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside BILLYBOB
 
Quote:

Originally Posted by Ta2Don (Post 6567430)
Looking forward to the pump project progress...:metal:

So… did Martin pick up one of the pricey pumps???:haha:

No Don I didn't if I had he would have been sobbing all the way home . He was bad enough when I got the door at the swap meet .
Martin

Grizz1963 03-11-2014 12:11 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside BILLYBOB
 
Got two new, unused fire hoses and reels recently, to use in the Reproduction petrol pump I have started to build. Only needed part of one.

http://i294.photobucket.com/albums/m...ps6ef8106f.jpg

Offered on out free of charge on a couple of UK forums, and got a reply from Romania..... Yes, really.

Anyway, mentioned that I collected plates from around the world, and Mike replied that he worked in the truck industry, and would have a look.

These arrived in the post yesterday.

Romania has a system where the black on white plate takes a while to be issued, but if you are impatient, you can get a red on white temporary plate issued, these need to be returned to the government it seems..... I have one.

The green plate is from Austria, and has been folded in half, presumably to discard, but it is mine now.
I think it may be an "export" plate.
Hopefully someone who knows will clarify for us.

http://i294.photobucket.com/albums/m...psacda4c27.jpg



And here is St Francis in his spot in the garden.

Looking forward to the garden coming back to life, its been a long and wet winter.

http://i294.photobucket.com/albums/m...psa4986046.jpg

Grizz1963 03-11-2014 01:10 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside BILLYBOB
 
Went down to the garage for a bit last night to do some other jobs, then started looking at this and stopped......

I need to figure out how to cut these curved sections correctly, so that I can butt weld them together without having to fill in anywhere.

Cold wind stopped me before I could do a final marking out and cut, as I am still not sure I have got it right.

Maybe a job for mate Martin to supervise, so that I have someone to blame if it goes tits-up.

I guess there is not real magic way of cutting, I just need to measure, draw a line and pray.


http://i294.photobucket.com/albums/m...ps89a3bdaa.jpg

Hope to get back onto this the weekend, if the weather holds out.

In the mean time I am looking for a small window winder shaped handle, before I make one, to go on one side, like they used to on some pumps, to start them.

http://image.payloadz.com/products/763084_1.jpg

Ta2Don 03-11-2014 09:11 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside BILLYBOB
 
Great Start Mate!!!:metal:

McMurphy 03-13-2014 11:57 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside BILLYBOB
 
Came home to a package in the mail from you.
Thank you VERY much !!

I just got done gushing about it in my thread, I get to keep the shirt and beanie, wife got the bag and the ear buds !!

I will have to get another box off to you too here soon I think !!

Grizz1963 03-14-2014 05:37 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside BILLYBOB
 
Quote:

Originally Posted by Ta2Don (Post 6570396)
Great Start Mate!!!:metal:

Wish it was done already mate. :mm:

Quote:

Originally Posted by McMurphy (Post 6574202)
Came home to a package in the mail from you.
Thank you VERY much !!

I just got done gushing about it in my thread, I get to keep the shirt and beanie, wife got the bag and the ear buds !!

I will have to get another box off to you too here soon I think !!

An absolute pleasure Mike, glad Mrs M let you keep something for yourself too.

Grizz1963 03-14-2014 05:50 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside BILLYBOB
 
Been a long week with head office meetings etc.
Busy Busy Busy.

Makes you feel a bit boxed in.

http://i294.photobucket.com/albums/m...ps27a403ff.jpg

Tonight I got in, cut the grass and then went to the garage to start on this replica pump again.

Got about an hour in.

Re-measured the new front corners, cut all, and ground the edges with a flap-disk so that I can weld in the morning.

I once had the large grinder out at 07.30 working some heavy steel without knowing it was so early...... Nicola was not impressed.

Toe-teckters were at the ready when cutting the corners in preparation for the welding.

http://i294.photobucket.com/albums/m...psc15ae31c.jpg

One side cut and ready.

http://i294.photobucket.com/albums/m...ps9174f048.jpg

Originally planned to do the bottom square, but as I had some curved material left over after making the top section, I decided to make a section for the bottom as well.


http://i294.photobucket.com/albums/m...ps9aa68a09.jpg

I have now prepped all the sides and as I am usually up at stupid-o-clock, it means I can weld early morning, and then cut down the top of the box when the world has woken up.

Still need to find some pits to make it all come together.

Ta2Don 03-14-2014 07:22 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside BILLYBOB
 
Still love the phone booth Pic!!!:metal:

Pump is coming together...:metal::metal::metal:

Grizz1963 03-15-2014 03:20 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside BILLYBOB
 
Up at Stupid - O - Clock after hitting bed after midnight.

Fortunately I had cut and done most of the grinding last night.

Welded the lot together to create the an external frame.

http://i294.photobucket.com/albums/m...ps28e2f794.jpg

Then had to fill the hole in the centre..... step up old steel shelf stored in a corner for the last year.

http://i294.photobucket.com/albums/m...psb9bbfb96.jpg

http://i294.photobucket.com/albums/m...ps1a767b7b.jpg

http://i294.photobucket.com/albums/m...ps405c6d5f.jpg

http://i294.photobucket.com/albums/m...pse3cbcf56.jpg

Inbetween I walked up to the house next door but one to lift a door handle off a door in a skip.

Will make a small winder section up, and should then have a dummy switch for the side.

http://i294.photobucket.com/albums/m...ps8f1fd755.jpg

After making up the front side, I measured about 4 times and cut the cabinet down a bit, to get to 5 foot.
Also relocated the one hinge that I had cut off, which had me grinning like I had won a decent scratch card.

http://i294.photobucket.com/albums/m...ps230768e5.jpg

This cabinet is typically quite flimsy, so I added some strengthening on the bottom too.

http://i294.photobucket.com/albums/m...ps26a173d5.jpg


After Martin popped around to show off with his new bonnet/hood from California, I called it a day.

I just fixed the front panel to the carcass with a load of rivets, will use some silicone to make it all waterproof.

http://i294.photobucket.com/albums/m...psa5a92734.jpg

http://i294.photobucket.com/albums/m...ps2d774892.jpg

That's it for today.


All times are GMT -4. The time now is 09:07 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com