Re: 61K10 build
 

Looking forward to seeing the seat we've been hearing about!!

Re: 61K10 build
 

Okay lets see those seat pics...

Re: 61K10 build
 

Looks like we had the same idea...!!!

Re: 61K10 build
 

x2......wheres the seat pics?

Re: 61K10 build
 

He's on that West Coast time, so it'll prob be a few more hours!

Re: 61K10 build
 

you guy's just get up to early---nothing special about the seat. It's hard to tell in the pic's but it''s darker than the interior gray paint, just enough to offset the colors.

question for you guy's--should i paint the inset in the doors (where the handles and arm rest are) the same as the dark paint on the dash?

will need to slide seat forward to in stall my seat belts. as far as s/belts go can you install the 3-point ones with the gas tank filler installed?

1963c-10--my back of the cab was pretty bad after blasting. with the bed liner it should out last me lol.

the long awaited seat pic's (he gave $40 off for taking so long)

Re: 61K10 build
 

Seat looks great. I'm no help on the 3 point belts...but there are a couple of good threads on them if you do a forum search. I think the door inserts done the same as the glovebox would look great!!!!

The back of my cab was nice condition wise....just can't ever get in there to wash it. Figured this would eliminate all maintenance on the back of the cab and forward bed panel.

Re: 61K10 build
 

Nice! I like it. Did you put the old burlap feed bag back under the foam?

Re: 61K10 build
 

Mitch--lol--I got a new chicken feed bag for the seat.

Re: 61K10 build
 

Did a little more--put the p/s fender on (the one that doesn't fit well) yes they are after-market. the driver's side fit like a glove, p/s i had to cut the rear attachment and weld it back together, and it still doesn't fit great. there are two different brands. I have 4 org to fix if i want (patch panels) I think I'm done for awhile lol! have to round up some guy's to put hood on OR?

Re: 61K10 build
 

I've put a hood back on by myself more than once before. I wouldn't recommend it, especially if you dont want to scratch the shiny new paint!

Re: 61K10 build
 

Jason--I have done a few over the years but this one is heavy and awkward. you can't get a hold of it.

took my rear bumper off to finish welding and clean up. I added a receiver tube for a drop down. if i ever decide to tow something heavy it's long enough to tie it to the frame x member.

and of course my BULL horn. you need a horn it's the law lol! train horns are to $$$

won't let me up-load pics

Re: 61K10 build
 

Your truck is looking real nice and I really like the color combination. Where did you get the carpet?

Re: 61K10 build
 

Truck is looking real nice. Least the seat won't be to hot after the sun bakes on it for awhile. lol

Re: 61K10 build
 

thanks guy's--62 Barnfind(John) the carpet is from Brothers but was dropped shipped from the makers (don't remember the name) probably only a few makers that the venders buy from.

TJ--probably better than black--

pic's from yesterday--mounted my horn but can't get it to MOO!!--not grounding i guess.

Re: 61K10 build
 

I wanna here that horn mooooo when you get it working though. lol. Yeah...sounds like its not grounding. Have this issue with my horn as well...either its not grounding to the frame, or the steering column has issues. Or both. :chevy:

Re: 61K10 build
 

Hey Kimble, truck is looking awesome! I promise this is the last bumper question, I'm thinking you removed the rivets from the rear sill mount and used bolts to attach the mounts and bumper brackets?

Re: 61K10 build
 

Hey Brian, you should only have to drill 4 holes, if yours don't have any for the brackets like Kimbles. Mine and Kimbles looks exactly the same, and you don't have to remove the rivets. Blow up this pic and you'll see the holes and see why/how Kim made the brackets like he did.
Sorry Kim, didn't mean to hijack your thread.
http://i1297.photobucket.com/albums/...ps3fa07e0f.jpg

Re: 61K10 build
 

no problem Mitch (both frames looks good by the way) back to the bumper brackets. my sil brackets were bolted on (rivets removed) from the po which had the heavy bumper. I copied there bracket design some what. so yes you are right Brian. I put my bracket on the inside of the frame which make it harder to put bumper on and off. (you have to jack up the bed about 1 1/2") I almost put them on the outside of the frame which would have made install & remove easier. my bumper was off a 2wd probably long bed as the 2wd frames are wider and mount differently.

Brian what kind of bumper are you wanting to use? I still have the templets from mine that i can trace on paper and send to ya.

Mitch do you have a build thread?

Kimble

Re: 61K10 build
 

Ha. No build thread for me. Mine would be way too slow! lol

Re: 61K10 build
 

funny--I waited about 2yrs to start mine so i would have something to post lol. start one anyway.

Re: 61K10 build
 

Hey Guys thanks for the info on the bumper, I don't have a bumper yet
X2 on a build thread from Mitch!

Re: 61K10 build
 

Well i drove my tk for the first time up to my neighbors house to feed their fish. boy this thing is rough riding and the t/f case is noisy as hell. (could be the rear end also) never got out of third gear, and it could use a smaller steering wheel (with the power steering) or a better ratio box. I never drove it before, just around my yard and then tore it apart. I guess my 2k Z71 spoiled me lol! now to get the hood on and get it out on the road.

Re: 61K10 build
 

I've been anxiously awaiting the maiden voyage! Yup, the sm420 and the t221 both have pretty healthy gear whine. Tough, but loud.

Re: 61K10 build
 

Also you'll like a quick ratio steering gearbox much better. I know you can get the 2wd boxes in the quicker ratio but im 100% sure about the 4wd boxes.

Re: 61K10 build
 

Wow!

Re: 61K10 build
 

Looks incredible!!!

Re: 61K10 build
 

argonaut is right about the gear whine. I drove mine for the first time a couple of days ago. The truck was all over the road, I adjusted a lot of play out of the drag link and tightened up the steering box a little. I'm hoping it will help.
My two year old son and I drove my 66 K10 from Montana to Southern Ohio, 1800 miles I don't remember any driveability problems but I do remember the second day waking up in Sioux Falls SD to -15 and also the AM radio. But I was 22 years younger

Re: 61K10 build
 

Hey Kimble, what ya doing?

Re: 61K10 build
 

On the tk not much. still need to put the hood on. have some runs in the paint below the eye brows on the hood. when sanding and buffing them out, you still see them as the paint is a different color. might re-paint since the tk sits so high you will see them. will take a pic so you know what I'm talking about.

plated my steering arm on both sides (for extra strength) no way is it going to break now.

moved a cord of wood to go with what i have from last year, and cleaned my wood stove chimney. getting ready for winter as I'm at 2500 feet in the sierra foot hills.

going to rain tomorrow as that will be clean my shop day--what a mess lol!

So Mitch what have you been doing on your tk?

Kimble

Re: 61K10 build
 

the t-221 definetly is loud

Re: 61K10 build
 

http://vid615.photobucket.com/albums...psfc9zzfu1.mp4 this is what I do for the noise

Re: 61K10 build
 

What am I doing, oh just pulling dents and daydreaming bout having a nice truck like yours to drive.
You weren't kidding about how many times they beat the back of the cab. Looks like someone slung gravel rocks at the back. lol
http://i1297.photobucket.com/albums/...ps700fcbde.jpg

Re: 61K10 build
 

Joe--thanks for the tip! I guess i need to upgrade lol! your tk gave me the motivation to do my tk. aren't you doing another one?

Mitch--your cab looks better than mine as far as rust holes go. there wasn't a panel on mine that didn't have a dent, and it still has dent's and some waves lol.

Got to get my hood on (have a plan to do it without help) wish me luck! Get my new wire-rope on the winch. My 2k Z71 is clunking going into gear (reverse is louder) It's always something. a couple of pics--

take care guy's----------kimble

Re: 61K10 build
 

Kimble I am working on a 1962 k-20

Re: 61K10 build
 

well i decided to put my hood on by myself, worked out great only one small chip at the rear by the cowl. still need to adjust the fit as i was needing a Bud by this time.

also my t/f case might be a little quieter as it in 4h instead of 2h--needs linkage adj.

so some pics of my install

Re: 61K10 build
 

this hood sure makes this truck complete. winch cable and just drive it!!!-- only 2-1/2yrs in the making.

Re: 61K10 build
 

WOW ! The hood really makes the truck ! Love this truck ! Very nice work

Re: 61K10 build
 

That is awesome! I will be stealing that idea to put my hood by myself someday...

Bret

Re: 61K10 build
 

Came out great. Would be really proud if it were mine.