The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Heavy Haulers (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=239)
-   -   The Ultimate Craigslist find thread (https://67-72chevytrucks.com/vboard/showthread.php?t=656427)

C10 - C90 Bill 06-28-2017 08:46 AM

Re: The Ulitmate Craigslist find thread
 
Nice clean truck with some heavy specs, low miles and great price to boot (if not a typo).

A little too far for me though (about 2800 Miles, lol).

NoStopN 06-28-2017 05:50 PM

Re: The Ulitmate Craigslist find thread
 
Wow. That looks mint.

greywuuf 07-13-2017 04:06 PM

Re: The Ulitmate Craigslist find thread
 
Been modded a little https://www.facebook.com/marketplace...22491645027576

ImpalaJim 07-14-2017 06:08 AM

Re: The Ulitmate Craigslist find thread
 
useless post some don't and wont fakebook

5Tractorguy 07-14-2017 08:33 AM

Re: The Ulitmate Craigslist find thread
 
1 Attachment(s)
Quote:

Originally Posted by greywuuf (Post 7990137)

For those without a facebook, here ya go...

Attachment 1670133

Dannny B 07-14-2017 11:06 AM

Re: The Ulitmate Craigslist find thread
 
Quote:

Originally Posted by ImpalaJim (Post 7990549)
useless post some don't and wont fakebook

Vering slightly off-topic, EVERYONE needs to be aware of developments concerning social media. This is VERY scary.
https://scout.ai/story/the-rise-of-t...aganda-machine

jumpsoffrock 08-10-2017 01:15 AM

Re: The Ulitmate Craigslist find thread
 
4 Attachment(s)
I will post pictures in a few minutes.

Looks like a very cool interesting truck.
Quote:

1963 Chevrolet dump truck. The truck is a m80 10 wheeler with air breaks I believe the motor is industrial 366 but it does not run. It ran when it was parked but seems to be frozen now. The truck is out of the DMV system and just comes with a bill of sale. Call me for more info, serious callers only please. $1500 firm!
https://sfbay.craigslist.org/nby/cto...246987078.html

jumpsoffrock 08-10-2017 01:59 AM

Re: The Ulitmate Craigslist find thread
 
5 Attachment(s)
one more

GM72K10 08-10-2017 06:03 AM

Re: The Ulitmate Craigslist find thread
 
Custom Cab too

C10 - C90 Bill 08-10-2017 08:35 AM

Re: The Ulitmate Craigslist find thread
 
Cool truck, but where's the Clutch Pedal ??

(looks like a rare Automatic)

craneboy72 09-03-2017 11:50 AM

Re: The Ulitmate Craigslist find thread
 
Subscribe

5Tractorguy 09-03-2017 05:03 PM

Re: The Ulitmate Craigslist find thread
 
5 Attachment(s)
More stuff from here in the north east...

'69 C50

https://hartford.craigslist.org/cto/...290181185.html

Attachment 1686895

'68 C50

https://hartford.craigslist.org/cto/...286144377.html

Attachment 1686896

'67 GMC Incredibly good deal for a parts truck

https://hudsonvalley.craigslist.org/...284266401.html

Attachment 1686897

50's GMC Spoke wheels are pretty neat... good price too.

https://hudsonvalley.craigslist.org/...259006748.html

Attachment 1686898

'84 GMC Brigadier

https://boston.craigslist.org/nwb/ct...290714668.html

Attachment 1686899

5Tractorguy 09-03-2017 05:03 PM

Re: The Ulitmate Craigslist find thread
 
4 Attachment(s)
'55 GMC bus

https://nh.craigslist.org/cto/d/clas...237399017.html

Attachment 1686900

'50 GMC 630 Crappy pictures

https://newlondon.craigslist.org/cto...284761619.html

Attachment 1686910

Chevy 4400 This would be a cool one to restore with the compressor

https://newlondon.craigslist.org/cto...263894525.html

Attachment 1686911

'68 C50

https://maine.craigslist.org/cto/d/1...281448304.html

Attachment 1686913

C10 - C90 Bill 09-03-2017 05:32 PM

Re: The Ulitmate Craigslist find thread
 
Quote:

Originally Posted by 5Tractorguy (Post 8031135)
'67 GMC Incredibly good deal for a parts truck

Some interesting trucks there. That '67 is a good deal. I would definitely be grabbing it if it was closer. Looks like a 5500 or 6500.

83GMCK2500 09-15-2017 07:39 PM

Re: The Ulitmate Craigslist find thread
 
3 Attachment(s)
1960's gmc truck - $500 (puyallup,wa)

1960's gmc truck duel axle, 22' bed, don't know much about it, has been sitting for some years. seems to be whole $500 or best offer

Link: https://seattle.craigslist.org/tac/h...303573617.html

GHAH! I wish I had someplace to park this, the WANT is stroooong. :lol:

83GMCK2500 09-15-2017 07:44 PM

Re: The Ulitmate Craigslist find thread
 
5 Attachment(s)
1969 GMC cabover cab over 5 ton ramp truck tow truck - $3500 (Graham, WA)

Small block V6 engine that is not operational due to starter..

2 speed rear end...

Tilt cab for easy access to the engine

It was originally designed to haul backhoes and tractors...

I just purchased this truck and I am trying to get it going the more money I put into it..... I'm going to eventually have to raise the price

Maybe I could be used for a car hauler or tow truck

I don't have the ramps that go on the tail end

I believe the engine is a 305 with super High torque

The bed is 16 ft long

Perfect vehicle for off-road racing truck transportation

I don't know what the gears are but I talked to the owner and they say that's the truck would go 85 miles per hour with a Tractor on it

I'll be out there during the weekends working on it if you want to take a look sometime


Link: https://seattle.craigslist.org/tac/h...302821356.html

C10 - C90 Bill 09-15-2017 08:06 PM

Re: The Ulitmate Craigslist find thread
 
Engine should be bigger than a 305 in a 7500, if it still has the original.

Really should be a 401. Maybe even a 478.

NoStopN 09-16-2017 01:43 AM

Re: The Ulitmate Craigslist find thread
 
They had me until I saw the cab-over. Seattle doesn't help either.

Okiefromwatonga 09-23-2017 10:42 AM

Re: The Ulitmate Craigslist find thread
 
Ok, here is one if it had a 6V53 or 6V71 in it I would grab it my self.
https://oklahomacity.craigslist.org/...297444147.html

P.S. now that photobucket has gone full Nazi, how do we share pictures?

HO455 09-23-2017 11:02 AM

Re: The Ulitmate Craigslist find thread
 
2 Attachment(s)
Quote:

Originally Posted by Okiefromwatonga (Post 8046092)
Ok, here is one if it had a 6V53 or 6V71 in it I would grab it my self.
https://oklahomacity.craigslist.org/...297444147.html

P.S. now that photobucket has gone full Nazi, how do we share pictures?

You have to open the " manage attachments" box. Then copy the image off Craigslist and paste it to "Upload File from a URL" . This will only accept files below a certain level of quality. So you have to copy the low def version of the photo from Craigslist. Then two at a time upload them to the site. You can do five photos to each post. It won't allow copyrighted photos to post either. Hope that helps.
Here are two from your previous post.

C10 - C90 Bill 09-23-2017 05:30 PM

Re: The Ulitmate Craigslist find thread
 
Worth it if only good for parts, but it could be very restorable.

Softpatch 09-24-2017 03:26 AM

Re: The Ulitmate Craigslist find thread
 
http://67-72chevytrucks.com/vboard/a...1&d=1505519018
.
.
Quote:

Originally Posted by Okiefromwatonga (Post 8046092)
Ok, here is one if it had a 6V53 or 6V71 in it I would grab it my self.
https://oklahomacity.craigslist.org/...297444147.html

P.S. now that photobucket has gone full Nazi, how do we share pictures?

.
Thanks to a great member I gift has been bestowed an us
.........A patch if your running chrome THANKS Orge
.
http://67-72chevytrucks.com/vboard/s...d.php?t=746732
.
.

Softpatch 09-24-2017 03:28 AM

Re: The Ulitmate Craigslist find thread
 
http://67-72chevytrucks.com/vboard/a...1&d=1505519018
.
.
Quote:

Originally Posted by 83GMCK2500 (Post 8040482)
1969 GMC cabover cab over 5 ton ramp truck tow truck - $3500 (Graham, WA)

Small block V6 engine that is not operational due to starter..

2 speed rear end...

Tilt cab for easy access to the engine

It was originally designed to haul backhoes and tractors...

I just purchased this truck and I am trying to get it going the more money I put into it..... I'm going to eventually have to raise the price

Maybe I could be used for a car hauler or tow truck

I don't have the ramps that go on the tail end

I believe the engine is a 305 with super High torque

The bed is 16 ft long

Perfect vehicle for off-road racing truck transportation

I don't know what the gears are but I talked to the owner and they say that's the truck would go 85 miles per hour with a Tractor on it

I'll be out there during the weekends working on it if you want to take a look sometime


Link: https://seattle.craigslist.org/tac/h...302821356.html

.
.
.
.
.
This is so cool...I want to drive this......Sp
.
.
.
.

factorystock 11-12-2017 09:48 PM

Re: The Ulitmate Craigslist find thread
 
I'm drooling over this barn find, a low mileage, super clean west coast '65 C 80 with Budds and air brakes at a very reasonable price. ( not mine ) https://sfbay.craigslist.org/nby/cto...381595270.html Can't get over the C80 thing, most were used commercially racking the mileage real quick. Most farm trucks of this vintage are the lesser rated C50 or C 60. I guessing 348 or 409? This needs to go to a good home of a Chevy truck nut.

C10 - C90 Bill 11-12-2017 10:29 PM

Re: The Ulitmate Craigslist find thread
 
Cool truck.

Sheet Metal looks great.

Mostly likely a 409. Believe it has to be at least a 348.

Full Instrumentation too. Looks like it has a Tach.

Looks like nice Heavy Front Springs the way it is sitting like that, especially having that heavy engine in there.

Would love to have it too, lol.

Would make a great Roll Back.

NoStopN 11-13-2017 12:50 AM

Re: The Ulitmate Craigslist find thread
 
I agree with you on all points Bill.

83GMCK2500 11-13-2017 08:21 PM

Re: The Ulitmate Craigslist find thread
 
5 Attachment(s)
Quote:

Originally Posted by factorystock (Post 8081045)
I'm drooling over this barn find, a low mileage, super clean west coast '65 C 80 with Budds and air brakes at a very reasonable price. ( not mine ) https://sfbay.craigslist.org/nby/cto...381595270.html Can't get over the C80 thing, most were used commercially racking the mileage real quick. Most farm trucks of this vintage are the lesser rated C50 or C 60. I guessing 348 or 409? This needs to go to a good home of a Chevy truck nut.

Here's the pics from that link.

83GMCK2500 11-13-2017 08:23 PM

Re: The Ulitmate Craigslist find thread
 
2 Attachment(s)
Ohhhhhh yes, here's a little beauty.

GMC Dump truck - $5000 (Link)

1955 GMC 660 dump truck, 4-71 Detroit Diesel. Runs good. $5,000 obo.
Call *** after 11 a.m. for details.

factorystock 11-15-2017 12:19 PM

Re: The Ulitmate Craigslist find thread
 
Quote:

Originally Posted by 83GMCK2500 (Post 8081756)
Here's the pics from that link.

Thanks for posting the photos Devin!, still learning the ropes. Most of my experience in trucks is in the '63-'66 era, and this is one of the best non fire 80's I've seen. GVW is not much more than a heavy 60 series, but you get the 18.K rear axle and 7k or 9K front axle. There was a 23K rear and 11k front axle options but these axles were usually only spec'd on heavy duty tractors, which are almost impossible to find in the condition of this 80.

Gypsyman 11-15-2017 12:25 PM

Re: The Ulitmate Craigslist find thread
 
4 Attachment(s)
Quote:

Originally Posted by C10 - C90 Bill (Post 8081090)
Cool truck.

Sheet Metal looks great.

Mostly likely a 409. Believe it has to be at least a 348.

Full Instrumentation too. Looks like it has a Tach.

Looks like nice Heavy Front Springs the way it is sitting like that, especially having that heavy engine in there.

Would love to have it too, lol.

Would make a great Roll Back.

After two months of asking the seller finally sent me engine photos...

C10 - C90 Bill 11-15-2017 01:25 PM

Re: The Ulitmate Craigslist find thread
 
Looks good.

Also has Power Steering.

Are you going to try to buy it?

Gypsyman 11-15-2017 01:38 PM

Re: The Ulitmate Craigslist find thread
 
4 Attachment(s)
I've tried on and off. He won't budge on the price and it's tough when you can't see them in person. If I've learned anything from Craigslist it's that everything looks much better in pictures than in person.

My attention right now is on this '64 GMC. Body looks solid but, again, the seller won't take the time to send photos of the passenger side of the truck. It's only 150 miles from me so I'm going to try to look at it in the next week or two.

C10 - C90 Bill 11-15-2017 03:08 PM

Re: The Ulitmate Craigslist find thread
 
Interesting truck, but it's not a '64.

I'm going to say that it's a '62.

By the way, that '65 C-80 is worth every bit of what he is asking for it.

If it were near by me, I'd be bringing it home for sure.

Gypsyman 11-15-2017 03:27 PM

Re: The Ulitmate Craigslist find thread
 
I was going by the sellers listing for the model year.

I agree that the C-80 is worth the asking price but (realistically) I still have to factor in $1700+ in transportation to get it here.

C10 - C90 Bill 11-15-2017 03:35 PM

Re: The Ulitmate Craigslist find thread
 
Quote:

Originally Posted by Gypsyman (Post 8083043)
I was going by the sellers listing for the model year.

I agree that the C-80 is worth the asking price but (realistically) I still have to factor in $1700+ in transportation to get it here.

If you found the right trucker, you might be able to get a back haul for about $500.

Especially if the owner could help load.

A Drop Deck Trailer would work the best.

Just saying, lol.

Gypsyman 11-15-2017 03:39 PM

Re: The Ulitmate Craigslist find thread
 
1 Attachment(s)
That's what I've been looking for. A back haul.

I also ran across this old girl.

For sale is a rolling cab and chassis with 502 big-block engine, 5 speed transmission, and 3 speed auxiliary transmission. Engine runs great and truck is street legal. Call 831.423.5287

https://sfbay.craigslist.org/scz/cto...356933195.html

Nobighurry 11-15-2017 03:53 PM

Re: The Ulitmate Craigslist find thread
 
5 Attachment(s)
how about a tow??? not a bad deal for $3k.

https://columbia.craigslist.org/hvo/...386843442.html

Airdirect 11-15-2017 07:02 PM

Re: The Ulitmate Craigslist find thread
 
Quote:

Originally Posted by 83GMCK2500 (Post 8081756)
Here's the pics from that link.

Wow, the 80 series Chevrolet is an incredible "barn find". I expect that some washing and buffing would have it looking great! Very rare truck with great options.

83GMCK2500 11-16-2017 01:40 PM

Re: The Ulitmate Craigslist find thread
 
5 Attachment(s)
I feel like Bill is really gonna dig this one. I know I do...diff lock and interlock? This old beast has done some work.

GMC 12 yard tandem 15 speed - $4500 (Idaho Springs) (Link)

Big V-6
5 speed trans. plus 3 speed transfer case
3 reverse gears 15 foward
3 stage cylinder
airlock twin screw rears

83GMCK2500 11-16-2017 01:42 PM

Re: The Ulitmate Craigslist find thread
 
5 Attachment(s)
Quote:

Originally Posted by 83GMCK2500 (Post 8083756)
I feel like Bill is really gonna dig this one. I know I do...diff lock and interlock? This old beast has done some work.

GMC 12 yard tandem 15 speed - $4500 (Idaho Springs) (Link)

Big V-6
5 speed trans. plus 3 speed transfer case
3 reverse gears 15 foward
3 stage cylinder
airlock twin screw rears

Part 2


All times are GMT -4. The time now is 04:05 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com