![]() |
Re: Project Vitamin C-10
Allan keep focused on your truck, and the depression will go away, at least temporally. You need to stay busy at some thing to take your mind off what is depressing you. It might as well be your truck. Kick that depression atta here. :josh:
|
Re: Project Vitamin C-10
I wish I could do that, but I dont have all the stuff nor the money to finish mine right now.
|
Re: Project Vitamin C-10
Hey Alan ,Remember we are all pulling for you.
I get bad mood swings in the winter. SADD. Seasonal attitude disorder or something close. It goes away when the sun and spring time returns . I use a sunlamp when I am at the computer in the winter which seems to help. I find things that make me happy and just do it even if it is silly My doc says that testosterone levels go down as men get older and that can affect moods . And the sun lamp helps the serotonin in the brain. Had a check-up lately? It really bites to get older..everything is wearing out and I am just turning 49.-- hang in there!! bubba :mm: |
Re: Project Vitamin C-10
Heck i'm only 28 and feel like i'm 60.
|
Re: Project Vitamin C-10
Quote:
Keep up the work, I will be reading on. |
Re: Project Vitamin C-10
Hi Allen just wanted you to know that IMHO your build thread is the best,and has inspired me and I'm sure allot of us Truckies to hang in there an keep going on there projects. Not only the great pictures, also a wealth of info on how to get things done and done right. If I ever get mine done you will always be a part of it for sure and thank you for that....Vernski:metal:
|
Re: Project Vitamin C-10
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
The fuel door is ticking me off. The door install is OK, but the bedside was lumpy to start with and the welding aggravated it. I've been chasing highs and low spots. I don't have my shrinking hammer at home. I'm not very good at shrinking yet. I've done some but need more practice. First I tried putting some pressure out at the fuel door while drawing the wheel arch in with a rachet strap, while I welded the rest of the fuel pocket up. It didn't help. http://i606.photobucket.com/albums/t...d/DSC02433.jpg The profile looks good until I put a straight edge on it. http://i606.photobucket.com/albums/t...d/DSC02434.jpg This is the high spot was was chasing around. Had some tin canning going on. You can see some heat spots where I tried to heat shrink some by quenching it. It helped with the tin can some. http://i606.photobucket.com/albums/t...d/DSC02438.jpg I cut slits in the BS to remove the tension on the metal. I got it tacked to gether and it helped a lot. Still not the way I want it, but it might stay that way. http://i606.photobucket.com/albums/t...d/DSC02440.jpg http://i606.photobucket.com/albums/t...d/DSC02444.jpg Storms rolling in time to get off the computer. |
Re: Project Vitamin C-10
Do you have a pin pull gun at home?
the bodyman I used to work with would use his pin pull gun on high spots to shrink them. we welded in some flush mount door handles on a firebird, and I bet he put 50 shrinks in a 4X7 area.. |
Re: Project Vitamin C-10
I've been working on my truck this past week. I needed to finish the drip rail shaving and flaring. I ground some paint off the roof and found an inch of bondo. I ground it off, and started to shrink it. My friend that owns a Body Shop and is a master in metal work gave me some tips on shrinking. He said don't get it cherry red, and start from the inside of where the low spot is. Then spot cool it a little at a time. It seemed to work and took some time. Now it's only about a quarter of an inch low in only one spot. I think it OK for Bondo now. I'm impatient. My friend said he'll come up and give me a lesson. I'm going to hold him to it. :lol:
|
Re: Project Vitamin C-10
I gave him a FORD tailgate that I was installing on a FORD bed that was on a Chevy Truck. He shrunk the FORD raised lettering to a flat panel. He blew me away. It looked like he replaced it with a new metal panel. :metal:
|
Re: Project Vitamin C-10
Quote:
Quote:
Quote:
|
Re: Project Vitamin C-10
That's a good idea. He's always in a hurry though. If he does, I'll try to do a video.
Or you could fly out. :lol: |
Re: Project Vitamin C-10
Sunchaser Tools. Shrinking Disk. Has anyone tried it. He offered a 3 day course for working metal. If you can't get it the first time your invited back till you do. He was booked unfortunately when I had a layover in Ca. couple a years back.
http://64.78.59.162/merchant.mvc?Scr...tore_Code=STOS |
Re: Project Vitamin C-10
Alan, every time I catch up on your thread, you add weeks to my build! I wasn't going to use a fuel door in the bedside, but I like how yours turned out so now I might cut one in too. Exceptional work once again!
I am glad to see you keep your head straight when you get bummed out. much better to go to the shop and do nothing if you have to, than turn to the bottle or a fake fix, keep it up man your truly an inspiration... |
Re: Project Vitamin C-10
Alan, looking good! I have a question; on your patch panels, what are you using to sand the weld seams down? I'm getting ready to tackle patch panels soon, and need all the help I can get!
|
Re: Project Vitamin C-10
Alan,
It has taken me a long time to finally get to the end of your thread. I love all of the detailed information you are providing. So many times while I have been reading I remember having the same if not similar problems to tackle. That is one aspect of building I have enjoyed the most is the problem solving. Sometimes trying three to four different things before you get it right. I hope knowing that we are all truly enjoying your thread will help keep you excited and motivated to work on your truck. As I read through your thread I was so sorry to hear about your dad and I have kept you and your family in my preyer's. I lost my Grandpa in November which is one reason I have not spent much time on the forum since I joined. I spent all of my free time this winter helping my parents get my Grandmas' house in order so she could move into my parents house before the Arizona heat arrives. One thing I did get from my Grandpa was his '66 Ford (excuse the bad language) one-ton truck that he bought new in 66. This helped me deal with his loss knowing I will always have this truck that he loved so much. Now, I have to figure out what kind of build it should be. Hope this reply was not too long. I wanted to chime in many times while reading but it took me months to get through this thread with the little time I have had lately. Michael |
Re: Project Vitamin C-10
2 Attachment(s)
Quote:
Quote:
Quote:
Thanks for the comments. It's hard sometimes to stay focused, but so is getting up and going to work at times. We get up and get the job done anyway.;) One thing I'm proud of is that it's been over 3.5 years since my last beer. It's too the point now I don't even think about it. It's a good thing cause I couldn't afford it anyway. :haha: Quote:
|
Re: Project Vitamin C-10
Quote:
God Bless!! |
Re: Project Vitamin C-10
Progress is progress Alan.. Im sure you will figure out the shrinking issue. thanks for posting the wheels and rolocs you use. keep at it my friend!
|
Re: Project Vitamin C-10
Quote:
|
Re: Project Vitamin C-10
1 Attachment(s)
[QUOTE=Bkndsdl;3943274]Thanks, Alan! How do you grind the weld down, with the grinding wheel 90 degrees to the weld, on the edge of the wheel or does it matter? Also, how and what is your 1407 grinding pads attaching to? As you can tell I am a greenhorn to the tools of the trade.........[/QUOTE]
They are called Roloc Mandrels.... the 1407 are roloc discs so they screw onto the mandrel via a plastic nub. |
Re: Project Vitamin C-10
Quote:
Ok, so what does the mandrel fit into? It looks like it'll fit into a drill, but I know that's probably not what's used in the industry...... Sorry, like I said - green, green, green...........:help: |
Re: Project Vitamin C-10
You put them in a angled die grinder.
|
Re: Project Vitamin C-10
thanks guys........sorry for hijacking, Alan.
|
Re: Project Vitamin C-10
I wouldn't call it hijacking. We are all here to help.
|
All times are GMT -4. The time now is 05:39 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com