Re: What did you do to your truck today part III
Finished removing the doors from the Stahl utility body on my '66. Tomorrow they go for sandblasting, then the fun starts of fixing/replacing the rusted out areas. This one is not bad but some are a bit worse for the wear.
[IMG]http://i453.photobucket.com/albums/q...psnio67rhu.jpg[/IMG] |
Re: What did you do to your truck today part III
1 Attachment(s)
Sprayed the firewall and frame with Raptor bed liner. Looks great and easy to spray.
|
Re: What did you do to your truck today part III
2 Attachment(s)
Drug this '64 out from it's resting place for the last 16 years. Amazingly enough, the tires were still aired up! I'll have it home this weekend.
|
Re: What did you do to your truck today part III
1 Attachment(s)
Bottom of the cab in two coats of rust tough primer for temporary. Tomorrow the epoxy goes on. :metal:
|
Re: What did you do to your truck today part III
1 Attachment(s)
New seat belts and old seat. She is now ready to drive on the street after over a year.
|
Re: What did you do to your truck today part III
1 Attachment(s)
reconnected my heater, general de-greasing and crud removal of the block, valve cover and side cover gasket replacement, cleaned up the ignition wires, and polished the air filter cover on the weber.
|
Re: What did you do to your truck today part III
Quote:
|
Re: What did you do to your truck today part III
Been getting everything pulled out of the dash and off the firewall. Now to start replacing sheet metal. Lots of work ahead.
http://i.imgur.com/9JcqBdnh.jpg |
Re: What did you do to your truck today part III
|
Re: What did you do to your truck today part III
Quote:
Neat. |
Re: What did you do to your truck today part III
Quote:
|
Re: What did you do to your truck today part III
Got the timing right and tested the overdrive trans to see if it works.
http://img.photobucket.com/albums/v3...psjkhvd2xo.mp4 http://img.photobucket.com/albums/v3...pseyulqyuo.mp4 |
Re: What did you do to your truck today part III
1 Attachment(s)
LED lights in my shifter knob
|
Re: What did you do to your truck today part III
3 Attachment(s)
Finally got time to get the glove box back together with a new insert.
Broke down and pulled off the back bumper. I realized the lights "issue" could likely be replaced with ATV or motorcycle lights. I'm going to work on finding them. Also, needed the bumper off to pound out a dent in order for the rear driver wheel to have more clearance as well as attempt to get the top bolt off the rear shock. It has been "stubborn" so far. |
Re: What did you do to your truck today part III
2 Attachment(s)
Got my bedside stripes and letters hand painted today. Local sign shop painted them for me. They are metallic silver
|
Re: What did you do to your truck today part III
2 Attachment(s)
Not today but Monday, pulled it out of its resting place for the last 9 years and brought home.
Bought it as a non runner, but got it running Wednesday evening. |
Re: What did you do to your truck today part III
Was finally able to get the cab off to do some rust repair today. I put some new cab supports in also. It's not much but it sure feels good to get some new parts welded in.
http://i.imgur.com/kHASQzkh.jpg http://i.imgur.com/Evi3vUHh.jpg |
Re: What did you do to your truck today part III
Installed the power booster/ hydro clutch today. Still have to run the brake lines and linkage.
http://img.photobucket.com/albums/v3...psdn04jyfj.jpg http://img.photobucket.com/albums/v3...psj5blw41t.jpg |
Re: What did you do to your truck today part III
Figured out that the aftermarket AM radio that was in the old truck when I got it actually works. It's so old, it was made in Japan, not China. :lol:
|
Re: What did you do to your truck today part III
I took the truck out for it's maiden voyage (sense it was painted). I have not driven it for over a year and a half. The doors rattled like crazy but I think that is because the whether stripping is falling off. The inside door handle also fell of but that is not a big deal.
Sorry no pictures. |
Re: What did you do to your truck today part III
|
Re: What did you do to your truck today part III
http://i36.photobucket.com/albums/e1...psekpgj2lq.jpg
Figured out that Chevy designed the side mount spare to be movable depending on what access was needed to the bed. So I'm putting it back to where the spare fits in the indent on the fender. Got that old box setup out of the bed. The thing is steel and heavy. Had to use my motorcycle jack to get that crap out of there. |
Re: What did you do to your truck today part III
Quote:
Also, it looks like you have a hydraulic clutch set up like my '60 GMC...what part did you use to set up your brakes and clutch? Thanks! |
Re: What did you do to your truck today part III
62 Barnfind truck is awesome! Hope he answers where he got those.
I have seen air cleaners "Like" those also, I think Speedway http://www.speedwaymotors.com/Nostal...ner,34533.html Mooneyes http://www.mooneyesusa.com/product-p/jehe9600c.htm http://shop.kustomcarparts.com/Chrom...?categoryId=-1 http://shop.kustomcarparts.com/7-1-2...?categoryId=-1 http://shop.kustomcarparts.com/Chrom...?categoryId=-1 |
Re: What did you do to your truck today part III
1 Attachment(s)
Trying to get first gear back in.-------------------actually just fixed a bad grease fitting and removed a broke manifold bolt.
|
All times are GMT -4. The time now is 01:01 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com