The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   What did you do to your truck today! (https://67-72chevytrucks.com/vboard/showthread.php?t=401176)

profe56 05-28-2012 01:02 PM

Re: What did you do to your truck today!
 
Quote:

Originally Posted by snacks (Post 5402411)
rear sway bar ,truck is so low had to mount it to the frame

I want to know more about that bar behind the rear end

profe56 05-28-2012 01:06 PM

Re: What did you do to your truck today!
 
Quote:

Originally Posted by snacks (Post 5402411)
rear sway bar ,truck is so low had to mount it to the frame

Sorry: I want to know more about the sway bar behind rear end of SNACKS truck

shopking72 05-28-2012 04:32 PM

Re: What did you do to your truck today!
 
Quote:

Originally Posted by VDOG (Post 5400281)
One clean Longbed. I have seen a few that color and all of them stand out like yours. Thats Killer.

Thanks a lot!

midniteblues 05-28-2012 06:39 PM

Re: What did you do to your truck today!
 
5 Attachment(s)
Swapped these unknown seats out for these seats(dodge)
Also added retractors for all three seats,and added a third 67 seat belt n buckle for the little guy in the middle (all three of us can ride in it now:metal:) and did lots of cleaning on the inside (po's must've smoked a lot in the truck green sticky film all over everything you can see it on the gauge cluster in the first pic yuck)

bollybib 05-28-2012 10:40 PM

Re: What did you do to your truck today!
 
I put in a new air filter.

snacks 05-28-2012 11:06 PM

Re: What did you do to your truck today!
 
Quote:

Originally Posted by profe56 (Post 5404099)
Sorry: I want to know more about the sway bar behind rear end of SNACKS truck

what do you want to know im all ears
:metal:

Tmwoodall 05-28-2012 11:23 PM

Re: What did you do to your truck today!
 
2 Attachment(s)
Got my second exhaust ring installed and reshot my firewall for about the 30th time. Details in the signature.

PAWS 72 05-29-2012 01:53 AM

Re: What did you do to your truck today!
 
I kept noticing Saturday on the way to a car show that i had a squeeking sound. Got ready to drive it to church Sunday morning and found a belt on the ground.So I replaced a alternator belt this morning.

The first good stroal that the new motor has had.Ran purty good.

Clrussell 05-30-2012 07:25 AM

Re: What did you do to your truck today!
 
Removed old front axle, cut off old front spring mounts and worked on fab for the new front springs and hangers.. Got the 60 sitting in the floor ready to go in truck when front suspension is done.. Monday I finished up my front 2 bead lock installs/ mounting.. Lots and lots of bolts.. Should have progress pics soon
Posted via Mobile Device

Tmwoodall 05-30-2012 01:24 PM

Re: What did you do to your truck today!
 
1 Attachment(s)
Bam. Finished it up (do need to get a carbide bit for my die grinder, and clean up a few hard to reach welds). Decided to strip the frame down and put on SPI epoxy instead of the junk I had previously. Stripped and repainted total area under cab. I'll be doing the rest of the frame in pieces as I go.

magwakeenercew2jh 05-30-2012 08:24 PM

Re: What did you do to your truck today!
 
4 Attachment(s)
Installed the first side (driver's) of the electric windows that the P.O. and my friend gave me as a bro-bonus.
I had the doors and windows all done, but I'm really glad for the e-windows.

Tip: If you ever, in the most remote chance think you'll be taking your doors apart again, never, ever, ever use these big handle "guards"
(or whatever you call them) shown in the pic. I had to grind brand new handles into trash to get the door panels off. They simply hide
the clips. At least with the door panels *I* am using.

I got one side ground down, and was grousing like the old codger I am when grandson Will showed up to clean up my mess and save
the day and mood. He handed me tools until one side was all buttoned up.

Now, I'm off for a few weeks and no time for the truck.Bummer. I was hoping to get both sides done so I could mail off both manuals
off and mailed to a Form Member for his build.

PAWS 72 05-31-2012 12:12 AM

Re: What did you do to your truck today!
 
1 Attachment(s)
After the new tailgate being on over 2 months finally got the new letters on.

RexDodge 05-31-2012 01:40 AM

Re: What did you do to your truck today!
 
1 Attachment(s)
Got my to do list of things under the bed done and reinstalled the bed. That sure feels good. In this picture the bed is just setting loose and needs to be shimmed. Now I need to get some body work and a few other details done. Then it's time to drive this thing! Yesssss

dracula4999 05-31-2012 02:59 PM

Re: What did you do to your truck today!
 
Pulled the bed off, threw it on a scrap metal trailer and cut the exhaust off.

chopnchaneled 05-31-2012 03:20 PM

Re: What did you do to your truck today!
 
Quote:

Originally Posted by dracula4999 (Post 5410090)
Pulled the bed off, threw it on a scrap metal trailer and cut the exhaust off.

What was wrong with the bed?

69 gmc 05-31-2012 03:25 PM

Re: What did you do to your truck today!
 
Quote:

Originally Posted by longbed67 (Post 5373272)
gotta love those fish eye lenses!

Yeah, they really help you capture what you want to... even in a cluttered garage!

flashed 05-31-2012 08:11 PM

Re: What did you do to your truck today!
 
I got my barn find 74 stepper running after sitting for 20 plus years and put a set of van Ralleys on it. Then I took her for a short drive .

3drburb 05-31-2012 08:55 PM

Re: What did you do to your truck today!
 
1 Attachment(s)
I pulled the doors and rear panels, scuffed, cleaned then painted them a few shades darker to match the newer seats and center console.

jhwkns 05-31-2012 10:20 PM

Re: What did you do to your truck today!
 
I installed a console that a friend gave me. I don't know what it's from, but after some modifications to make it sit level, it worked out nicely. Afterwards, I washed it, and made ready for a Utah trip next week. I get to see how it runs at 10,000 ft.
http://i486.photobucket.com/albums/r...os/console.jpg
http://i486.photobucket.com/albums/r...os/deetale.jpg

mud.man.rj 06-01-2012 12:39 AM

Re: What did you do to your truck today!
 
Console is from a 79 Ford Bronco.:lol:

Palf70Step 06-01-2012 05:21 AM

Re: What did you do to your truck today!
 
Quote:

Originally Posted by jhwkns (Post 5410871)
I installed a console that a friend gave me. I don't know what it's from, but after some modifications to make it sit level, it worked out nicely. Afterwards, I washed it, and made ready for a Utah trip next week. I get to see how it runs at 10,000 ft.
http://i486.photobucket.com/albums/r...os/console.jpg
http://i486.photobucket.com/albums/r...os/deetale.jpg

I miss your wrench shifter. Beautiful truck!

jhwkns 06-01-2012 09:11 AM

Re: What did you do to your truck today!
 
Quote:

Originally Posted by mud.man.rj (Post 5411202)
Console is from a 79 Ford Bronco.:lol:

Oh Nooo! Egad!:eek: Anything but that!
Quote:

Originally Posted by Palf70Step (Post 5411377)
I miss your wrench shifter. Beautiful truck!

Thanks Bill, I put a couple hundred thousand miles on that wrench, and it shows no wear whatsoever. I need more parts like that.
http://i486.photobucket.com/albums/r...seatcovers.jpg

dracula4999 06-01-2012 09:15 AM

Re: What did you do to your truck today!
 
Quote:

Originally Posted by chopnchaneled (Post 5410121)
What was wrong with the bed?

Killed a tree with it last year, hit right on the frame rail, bent the frame put a big v shape in the tailgate and wrinkled the floor of the bed.

elf w/capital T 06-01-2012 12:03 PM

Re: What did you do to your truck today!
 
front lh floor and support in, got off work at 2 am and couldnt sleep. :mm:

http://desmond.imageshack.us/Himg824...pg&res=landing

chopnchaneled 06-01-2012 03:23 PM

Re: What did you do to your truck today!
 
Picked up my new factory style hood from auto metal direct " made by tri plus" installed it and it fit great, I had been really concerned from all the stories i had read about. On to the rockers next.

ItsRandy 06-02-2012 12:03 AM

Re: What did you do to your truck today!
 
Ordered tires and wheels...OUCH!

GMC Canuck 06-02-2012 08:03 PM

Re: What did you do to your truck today!
 
1 Attachment(s)
new distributor and coil. Washed and cleaned the interior. Cruise night starts Monday.

PAWS 72 06-03-2012 12:23 AM

Re: What did you do to your truck today!
 
Took it to a Street Rod show today and member JBranontn and his wife. Pretty nice people.

PAWS 72 06-03-2012 12:27 AM

Re: What did you do to your truck today!
 
3 Attachment(s)
Here they are

NertiN 06-03-2012 01:12 AM

Re: What did you do to your truck today!
 
Install new tires
Posted via Mobile Device

ItsRandy 06-03-2012 01:21 AM

Re: What did you do to your truck today!
 
1 Attachment(s)
Painted the passenger side fender, one more to go.

PAWS 72 06-03-2012 02:06 AM

Re: What did you do to your truck today!
 
looking good Randy.when you get done i've got a couple for ya

54belair 06-03-2012 10:34 AM

Re: What did you do to your truck today!
 
Today, well today Im just driving home from a long trip out west.

Friday however, I found an absolutely perfect pair of 67 doors and a very good right inner fender. These were the last remaining large parts I needed for my truck. Now all I have to do is put in another 500 to 600 hours labor and an untold amount of money buying "small" items--and Ill be on the road again!!
Im glad its a labor of love cause it sure wouldnt "pay"!!

PAWS 72 06-03-2012 02:27 PM

Re: What did you do to your truck today!
 
54 belair i wish i could recoup all the hours i had in different projects.i could build a nice ride then.be careful

project 67 sub 06-03-2012 03:23 PM

Re: What did you do to your truck today!
 
bought/ordered a couple more autometer gauges from jegs so i can finish my gauge cluster when ever im home on home time and have time to do so...
Posted via Mobile Device

bovey 06-03-2012 03:33 PM

Re: What did you do to your truck today!
 
1 Attachment(s)
Making room for my new passenger showing up in a few weeks. Bench out, buckets in with new seat belts too.

This is my final test fit. Welding up all the brackets today, just have to make a new shifter handle. It has been a far larger project than expected.

mud.man.rj 06-03-2012 03:53 PM

Re: What did you do to your truck today!
 
Aren't they ALL lorger projects, money and time wise than expected, just changing my doors I told myself, 5 weeks later still fixing small stuff.:lol:

88fordf150 06-03-2012 04:15 PM

Re: What did you do to your truck today!
 
Quote:

Originally Posted by ItsRandy (Post 5414336)
Painted the passenger side fender, one more to go.

What kind of paint did you use? It looks wet in the picture, is it?


All times are GMT -4. The time now is 07:04 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com