The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   What did you do to your truck today.The 3rd chapter (https://67-72chevytrucks.com/vboard/showthread.php?t=773345)

OregonNed 08-31-2023 01:15 PM

Re: What did you do to your truck today.The 3rd chapter
 
Jacked it up to remove the sway bar and install its lowering brackets. Then I might get going on the steering joints replacement.

Casper42 09-02-2023 06:12 PM

Re: What did you do to your truck today.The 3rd chapter
 
Black Vinyl on a Cheyenne Super?

Quote:

Originally Posted by Rich72C10 (Post 9234943)
Got in my new "custom" SPID from Jeff Lampe at the Out in the Shop today. I f**k up the first one, which I knew I would do one way or the other, so I am glad I was smart enough to have ordered two.

Jeff Lampe does fabulous work - I don't think there is anywhere else you can get a SPID that looks this close to original


Rich72C10 09-02-2023 08:06 PM

Re: What did you do to your truck today.The 3rd chapter
 
2 Attachment(s)
Quote:

Originally Posted by Casper42 (Post 9236250)
Black Vinyl on a Cheyenne Super?

That was on the original SPID and I am adding the Super bit to my truck (just need to add the fender badges). Here's a photo of the cab, the headliner is black too.

For reference, here is my original SPID
https://67-72chevytrucks.com/vboard/...ictureid=26414

Here is the new to compare in one post
https://67-72chevytrucks.com/vboard/...1&d=1693256200

Today I add a "68-72 Chevy/GMC C10 Truck Chrome Ignition Switch Key Chain Scratch Guard" (KEY0849-386) from JLFabrication. Took forever to get it because it was back ordered. My keychain was really working a number on the dash paint.

In case anyone wants to get it or something else from JLFabricationn here's a coupon code: THANKYOU5

RonWT 09-02-2023 10:00 PM

Re: What did you do to your truck today.The 3rd chapter
 
3 Attachment(s)
Today was productive, I got a new hood seal installed, leaf guards under the cowling and another coat of sweet patina on her today. Even got rain X on all the glass.

Rich72C10 09-02-2023 10:05 PM

Re: What did you do to your truck today.The 3rd chapter
 
2 Attachment(s)
Quote:

Originally Posted by RonWT (Post 9236292)
Today was productive, I got a new hood seal installed, leaf guards under the cowling and another coat of sweet patina on her today. Even got rain X on all the glass.

flip for you

68bowtie 09-02-2023 10:27 PM

Re: What did you do to your truck today.The 3rd chapter
 
Quote:

Originally Posted by RonWT (Post 9236292)
Today was productive, I got a new hood seal installed, leaf guards under the cowling and another coat of sweet patina on her today. Even got rain X on all the glass.

What a beauty

68bowtie 09-03-2023 01:52 AM

Re: What did you do to your truck today.The 3rd chapter
 
3 Attachment(s)
I got the fenders and grille bolted in loosely. I really need to get this back on the road, it’s sooo close.

3757chevy 09-03-2023 10:35 PM

Re: What did you do to your truck today.The 3rd chapter
 
Quote:

Originally Posted by Rich72C10 (Post 9236268)
That was on the original SPID and I am adding the Super bit to my truck (just need to add the fender badges). Here's a photo of the cab, the headliner is black too.

For reference, here is my original SPID
https://67-72chevytrucks.com/vboard/...ictureid=26414

Here is the new to compare in one post
https://67-72chevytrucks.com/vboard/...1&d=1693256200

Today I add a "68-72 Chevy/GMC C10 Truck Chrome Ignition Switch Key Chain Scratch Guard" (KEY0849-386) from JLFabrication. Took forever to get it because it was back ordered. My keychain was really working a number on the dash paint.

In case anyone wants to get it or something else from JLFabricationn here's a coupon code: THANKYOU5

That looks good , I got one for the 'Burb and another for my Blazer. Neither one installed yet.

3757chevy 09-03-2023 10:39 PM

Re: What did you do to your truck today.The 3rd chapter
 
Quote:

Originally Posted by 68bowtie (Post 9236325)
I got the fenders and grille bolted in loosely. I really need to get this back on the road, it’s sooo close.

Looking good.:metal:

External 09-04-2023 04:04 PM

Re: What did you do to your truck today.The 3rd chapter
 
Replaced the brake booster today.
Now it really stops! As soon as I'd start the truck, the pedal was sucked to the floor.

I was noticing the engine not running as smoothly, and it was a vacuum leak in the booster. Apparently, cause now it stops like it was new and the engine purrs like it should.

External 09-04-2023 04:05 PM

Re: What did you do to your truck today.The 3rd chapter
 
Replaced the brake booster today.
Now it really stops! As soon as I'd start the truck, the pedal was sucked to the floor. Came back up when I killed the engine.
Happy that's all it was.

I was noticing the engine not running as smoothly, and it was a vacuum leak in the booster. Apparently, cause now it stops like it was new and the engine purrs like it should.

Speedracer39 09-04-2023 05:03 PM

Re: What did you do to your truck today.The 3rd chapter
 
1 Attachment(s)
Installed a/c vents and radio.

Rust_never_sleeps 09-05-2023 03:13 PM

Re: What did you do to your truck today.The 3rd chapter
 
finally buttoned up the last of my brake lines to complete quite possibly the longest disk brake conversion in history

72c20customcamper 09-05-2023 08:32 PM

Re: What did you do to your truck today.The 3rd chapter
 
1 Attachment(s)
Thought I buttoned up the 68 Goldens brakes . Bled the system no air in the system but the rears aren’t working properly I have firm brake peddle the rear is weak if I put it in drive at idle the Speedo goes to 15 mph hit the brake it slows to about 4 or 5mph . I ordered a new master as this one looks to be a rebuilt but it doesn’t look like the correct one . It is rectangular and has two equal rectangular reservoirs. I ordered a new Acdelco

72c20customcamper 09-05-2023 08:45 PM

Re: What did you do to your truck today.The 3rd chapter
 
2 Attachment(s)
The passenger front shoes were heat damaged the drum cut without an issue so that’s a plus . Had to use the grips to hold the old rear rubber brake hose fitting was buggered up so the line wrench didn’t hold , the hard line came right out without any issues as did all the rear lines . Love New Mexico trucks

body bolt 09-05-2023 09:36 PM

Re: What did you do to your truck today.The 3rd chapter
 
Quote:

Originally Posted by 72c20customcamper (Post 9237366)
Love New Mexico trucks

We sure do!

K10-Kansas 09-10-2023 08:14 PM

Re: What did you do to your truck today.The 3rd chapter
 
1 Attachment(s)
Not today but recently, put in all new drum brake components :)

Extended Power 09-10-2023 09:31 PM

Re: What did you do to your truck today.The 3rd chapter
 
1 Attachment(s)
Fuel, and coolant lines finished up.

OregonNed 09-11-2023 11:55 AM

Re: What did you do to your truck today.The 3rd chapter
 
5 Attachment(s)
Wanted to get going on my list of projects, so I tucked up the front sway bar.

K10-Kansas 09-11-2023 06:56 PM

Re: What did you do to your truck today.The 3rd chapter
 
Quote:

Originally Posted by Extended Power (Post 9239004)
Fuel, and coolant lines finished up.

Those are good looking. :)

1967GMCC20 09-13-2023 09:17 AM

Re: What did you do to your truck today.The 3rd chapter
 
1 Attachment(s)
Reverse lights without cutting M/T harness

72c20customcamper 09-13-2023 03:28 PM

Re: What did you do to your truck today.The 3rd chapter
 
2 Attachment(s)
New master on the 68 Golden . Everything is now new and she stops very well . I’m guessing the master cylinder the PO installed was the problem all along, stopped ok but the rears were not working correctly. I can now lock up all 4 in a panic stop . To shiny though for the truck

weq92f 09-14-2023 05:41 PM

Re: What did you do to your truck today.The 3rd chapter
 
1 Attachment(s)
.

My Vintage Air 4 knob controller had its fan (off, lo, med, hi ) switch go loose last season...it would spin freely a quarter round before it "caught" and would click the switch. Well, just yesterday it let go completely and would just spin, not catch and actuate the 3 way switch.

Pulled it and found that each knob has a set screw. The fan knob's screw was backed all the way out! Easy fix and with a little loctite, it'll probably never happen again...

-klb

OregonNed 09-14-2023 06:28 PM

Re: What did you do to your truck today.The 3rd chapter
 
Truck is on jackstands, rear shocks removed, and will be doing the shock relocator kit this weekend

72c20customcamper 09-14-2023 09:14 PM

Re: What did you do to your truck today.The 3rd chapter
 
Fixed the trans detent on the 68 golden steering column . I couldn’t get the shift lever to pull back and it really didn’t like to go into gear or into park . Took it all apart it’s amazing how 55 year old grease turns into concrete . Had to clean everything with PB Blaster and a wire brush . Lubed it put it back together and now it works like it should .

67 twins 09-15-2023 01:14 AM

Re: What did you do to your truck today.The 3rd chapter
 
Replaced the 2 core radiator that was in the truck with a new 4 core from Summit. That plus a new thermostat & radiator cap, I should be running nice and cool now.

ghackett1 09-15-2023 03:42 AM

Re: What did you do to your truck today.The 3rd chapter
 
1 Attachment(s)
http://https://www.67-72chevytrucks....1&d=1694763696
Today I installed the tow hooks on my 68:

1967GMCC20 09-15-2023 09:13 PM

Re: What did you do to your truck today.The 3rd chapter
 
Drove GMC 240 ish miles.. found a new barbque place in Carrollton, burned fuel at 12mpg $4.19/gal...dang.

The best sights are on US & State Routes...

ghackett1 09-16-2023 05:20 AM

Re: What did you do to your truck today.The 3rd chapter
 
1 Attachment(s)
http://https://www.67-72chevytrucks....1&d=1694855948

Today I installed black wrinkled finish early LT1 style valve covers on the 355.

'68OrangeSunshine 09-16-2023 07:03 PM

Re: What did you do to your truck today.The 3rd chapter
 
Quote:

Originally Posted by ghackett1 (Post 9241099)
http://https://www.67-72chevytrucks....1&d=1694855948

Today I installed black wrinkled finish early LT1 style valve covers on the 355.

They look good.

chewychevy67 09-16-2023 08:22 PM

Re: What did you do to your truck today.The 3rd chapter
 
Quote:

Originally Posted by ghackett1 (Post 9240669)
http://https://www.67-72chevytrucks....1&d=1694763696
Today I installed the tow hooks on my 68:

I am debating putting these on my 2wd 67. Can you post more pictures of your truck with these on please at different angles?

ghackett1 09-17-2023 05:15 PM

Re: What did you do to your truck today.The 3rd chapter
 
Quote:

Originally Posted by '68OrangeSunshine (Post 9241298)
They look good.

Thank You!

ghackett1 09-17-2023 05:16 PM

Re: What did you do to your truck today.The 3rd chapter
 
Quote:

Originally Posted by chewychevy67 (Post 9241312)
I am debating putting these on my 2wd 67. Can you post more pictures of your truck with these on please at different angles?

Yes, I’ll get a few more pics tomorrow..

67C10Step 09-17-2023 05:42 PM

Re: What did you do to your truck today.The 3rd chapter
 
Not necessarily to my truck but for my truck eventually. Buddy has a 68 frame that was bent in the front and he is taking all the useable parts off before he tosses it. I grabbed the auto transmission crossmember and the auto shifter linkage pedestal thing on the frame. Two more pieces down towards the manual to auto swap.

OregonNed 09-18-2023 01:07 PM

Re: What did you do to your truck today.The 3rd chapter
 
5 Attachment(s)
Installed my shock relocation kit yesterday. A little tough dealing with the rivets from below, but it worked out great.

67C10Step 09-18-2023 02:18 PM

Re: What did you do to your truck today.The 3rd chapter
 
Quote:

Originally Posted by OregonNed (Post 9242133)
Installed my shock relocation kit yesterday. A little tough dealing with the rivets from below, but it worked out great.

Used that same kit on my truck, but I was fortunate in the bed was off when I did it. Have put almost 2,000 miles on the truck in the last 18 months.

Already Gone 09-18-2023 06:52 PM

Re: What did you do to your truck today.The 3rd chapter
 
5 Attachment(s)
I didn't do anything significant to the truck but drove it the long way home after work yesterday morning. Beautiful sunny Sunday morning with very minimal traffic about at 7:00AM so perfect day for a 75 mile drive out of the City and cross country to loop back another way. Truck was down for 18 months and our drivng season here is quickly coming to and end so been driving it as much as I can since back on the road in June.

Steeveedee 09-18-2023 10:51 PM

Re: What did you do to your truck today.The 3rd chapter
 
Yeah, just drove mine to a store. Need to keep the juices swirling around, right?

71CHEVYSHORTBED402 09-19-2023 02:31 PM

Re: What did you do to your truck today.The 3rd chapter
 
3 Attachment(s)
Finished the engine bay, the battery proved a challenge to buy.

72c20customcamper 09-19-2023 07:35 PM

Re: What did you do to your truck today.The 3rd chapter
 
Quote:

Originally Posted by 71CHEVYSHORTBED402 (Post 9242462)
Finished the engine bay, the battery proved a challenge to buy.

Very nice work


All times are GMT -4. The time now is 09:02 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com