The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1947 - 1959 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=13)
-   -   What Did You Do With Your Truck Today ? (https://67-72chevytrucks.com/vboard/showthread.php?t=486137)

apache200 08-16-2013 11:21 PM

Re: What Did You Do With Your Truck Today ?
 
thanks Russell for the info

Zach B 08-17-2013 07:28 PM

Re: What Did You Do With Your Truck Today ?
 
I just got back from the swap meet in Springfield MO where I purchased the thrift master emblems, a cigaret lighter, and a license plate from 1947 with paperwork making it so I don't ever have to have my truck inspected once the plate is registered to it.
Posted via Mobile Device

Yewhi 08-17-2013 09:11 PM

Re: What Did You Do With Your Truck Today ?
 
Almost got my new bedwood finished and installed. Then I realized the dingleberries (who shall remain nameless) sent me the wrong bed wood set (for the second time). AARRRGGHHHH!!!!!!!!

http://farm3.staticflickr.com/2813/9...d31cff75_c.jpg

mechanixman 08-17-2013 10:28 PM

Re: What Did You Do With Your Truck Today ?
 
Quote:

Originally Posted by Zach B (Post 6225705)
I just got back from the swap meet in Springfield MO where I purchased the thrift master emblems, a cigaret lighter, and a license plate from 1947 with paperwork making it so I don't ever have to have my truck inspected once the plate is registered to it.
Posted via Mobile Device

What kind of paperwork does that?? :randy:

Zach B 08-17-2013 11:11 PM

Re: What Did You Do With Your Truck Today ?
 
In Missouri the plates first have to be approved for resuage by the state. They then give the guy who refurbishes the plates this paperwork you fill out just like a personalized license plate only after you fill it out and send it in they approve of it. This can take weeks or even months. You really just have to get lucky and find a guy who sells the plates made in that year for a start. The problem is not many people actualy sell plates like that. Sure you can buy the old plates but they rarely have paperwork with them. I'm not even sure where I would go to get the paperwork. You have to be able to prove a lot of different stuff. If you get something wrong you can go to jail so you have to be carful. I'm going to hold off for a while on doing the whole process so I know for sure I have all my stuff in order for it. The plate must match the year of your vehicle and in my case it must be marked as a truck plate. I'm not sure how it worked in MO 100% let alone in other states. You are limited to 1000 miles for personal use the rest must be for show and educational purposes so you can't use your truck as a daily driver. Also I am fairly certain that the truck must be garage kept.
Posted via Mobile Device

mechanixman 08-17-2013 11:41 PM

Re: What Did You Do With Your Truck Today ?
 
Oh alright,
In ILL, I manged to get class B truck 1952 plate for $25 (no paperwork).
And we have some plates called "extended antiques" which means from March till October, you can drive it just like a normal vehicle (and put as many miles on it as you like), but from November till march they must be driven for either "maintenance or show purposes." :devil: Ha ha I'm kidding
Also with these plates, as long as you have them in the vehicle, glove box is what most people do. You can use the Year of Manufaturer plates as normal plates.

Zach B 08-17-2013 11:46 PM

Re: What Did You Do With Your Truck Today ?
 
I imagine if you talk to the DMV you can get the same type of deal as I have but yours sounds a little better. The difference is as long as the truck is mine I can use the manufacture plate without ever having the thing inspected. It's a cool deal but has its drawbacks. I will probably get another truck with modern registration to make up for it.
Posted via Mobile Device

arturo7 08-18-2013 01:11 AM

Re: What Did You Do With Your Truck Today ?
 
Continued swapping parts in the electrolysis tank, practiced welding, banged on fender trying to straighten it out.

Zach B 08-18-2013 02:28 PM

Re: What Did You Do With Your Truck Today ?
 
Just moved the truck next to the 1940 Pontiac. Maybe now I can get the tranny out because the tires are not sunk into the ground. I need a concrete slab really badly.
Posted via Mobile Device

Daze57 08-18-2013 06:25 PM

Re: What Did You Do With Your Truck Today ?
 
had to cut out a section of flooring to install ''trap door '' for master cylinder lid - to take off easily - geeeez - well anyway it all worked out - measurments came out right for once . --------s;all good

itstheshu 08-18-2013 08:29 PM

Re: What Did You Do With Your Truck Today ?
 
Finally got the 327 to run the way it should. Now it's time to put a locker in it.
Posted via Mobile Device

tttuba 08-18-2013 11:28 PM

Re: What Did You Do With Your Truck Today ?
 
5 Attachment(s)
Put the bed together today...sort of....Need to come apart to be edged before paint.

Bierkan 08-18-2013 11:31 PM

Re: What Did You Do With Your Truck Today ?
 
Is that one photo reversed or is your fuel tank opening on the left side?

tttuba 08-18-2013 11:34 PM

Re: What Did You Do With Your Truck Today ?
 
Someone put it behind the seat and I put it back under the bed coming out the right.

Bierkan 08-18-2013 11:45 PM

Re: What Did You Do With Your Truck Today ?
 
Ah, '47 truck, I was thinking it had an in-cab tank as stock. One only wonders what prior owners were thinking sometimes, right?

tttuba 08-19-2013 12:20 AM

Re: What Did You Do With Your Truck Today ?
 
They did a real hack job on the reinforcement in the left corner where they brought the neck out. Have to fix that yet.

Zach B 08-20-2013 05:50 PM

Re: What Did You Do With Your Truck Today ?
 
I just got done looking at my transmission. I would never have thought those pre sm420 transmissions would have been so heavy. The gears have chips in them so I am going to have it looked at so I know it's safe to use. I defiantly want to clean it out because I'm sure the mettal chips are at the bottom.
Posted via Mobile Device

mknittle 08-22-2013 09:55 AM

Re: What Did You Do With Your Truck Today ?
 
Quote:

Originally Posted by Zach B (Post 6230688)
I just got done looking at my transmission. I would never have thought those pre sm420 transmissions would have been so heavy. The gears have chips in them so I am going to have it looked at so I know it's safe to use. I defiantly want to clean it out because I'm sure the mettal chips are at the bottom.
Posted via Mobile Device

Yep, they were used it trucks up to 2 ton.
Us old jeep guys like them for the super low first gear.

mknittle 08-22-2013 10:00 AM

Re: What Did You Do With Your Truck Today ?
 
Nothing on the GMC. I have been doing a 2X4to 4X4 conversion on a 1990 dodge. I have most of the parts gathered up now and am doing some fabricating. pretty simple stuff. just front spring hangers and a cross member for front motor mounts.

Speedbumpauto 08-22-2013 04:14 PM

Re: What Did You Do With Your Truck Today ?
 
2 Attachment(s)
Finished wiring the instrument cluster and it's ready to plug in. Now just need to make the plug in the dash harness.

Dan in Pasadena 08-22-2013 09:34 PM

Re: What Did You Do With Your Truck Today ?
 
Looks really, really nice SBA!

Today's activities:

http://i832.photobucket.com/albums/z...psc749b22b.jpg

Out with my old, pecky fender emblems and in with the nice-but-not-perfect ones I bought off CL.

Then I began working on my seat replacement. "New-to-me-seat" had some 4" long mounting studs rusted solid under it - what a PITA. Gibbs oil, double nutting & a long box end wrench cured that. I was lucky not to snap them though. Sorry, no pic's of that.

Russell Ashley 08-23-2013 08:18 AM

Re: What Did You Do With Your Truck Today ?
 
1 Attachment(s)
Finished putting in new windows, window regulators, handles, and felts. It took me a couple of days to do it all but I work slow. The windows all came together so must have come from one vendor, but the drivers side window had fine threads in the two attaching bolt holes and the other side had the correct coarse threads. Can't figure that one out, but it cost me an hour for a trip to the hardware store for two quarter inch fine thread screws.

YahamaR1 08-23-2013 08:37 AM

Re: What Did You Do With Your Truck Today ?
 
Fixt my cab shackels, and powdercoat them black.
And make some new brackets for my rear lights..
http://i1149.photobucket.com/albums/...DF95784E50.jpg
http://i1149.photobucket.com/albums/...DF2E5387B3.jpg
Posted via Mobile Device

mknittle 08-23-2013 09:13 AM

Re: What Did You Do With Your Truck Today ?
 
:metal:All look nice guys:metal:

Dan in Pasadena 08-23-2013 09:36 AM

Re: What Did You Do With Your Truck Today ?
 
Russ, that looks outstanding!
I need to do that too so I'll be picking your brain when the time comes. Personally, I love the wing windows on these old trucks. I know everyone doesn't agree but to me they're part of the charm of an older vehicle. Love that your chrome is all fresh! - Natch, being the chrome whore that I am! Lol.
Posted via Mobile Device


All times are GMT -4. The time now is 01:06 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com