Re: Loadmaster '47 COE
looking swell man, great progress. Funny how one pic has no clip, then next does. People dont realize how much time it takes to put one on and get everything lined up and get a good core support going and how that all ties in with the cab placement. Its alot more work than it appears in photos thats for sure.
|
Re: Loadmaster '47 COE
So true 99 so true, actually what you see is just the fenders and the grill hanging on them. I still need to work out all the other stuff you mentioned. And yes it will be a ton of work.
Rob |
Re: Loadmaster '47 COE
Progress, progress, I spent the better part of this week end setting up the front sheet metal. I was able to trim the lower parts of the inner fender wells and reuse some of the grill mount. I built a cross brace which will mount to the cross brace now added to the front of the frame. Speaking of the frame, I boxed the frame horns and added some extensions for a bumper mount. After all that was complete I set the front sheet metal back on and set all the alignments. Over all good progress for a couple of days. It's starting to look like a truck again.
http://i562.photobucket.com/albums/s...E/DSCI1097.jpg http://i562.photobucket.com/albums/s...E/DSCI1095.jpg http://i562.photobucket.com/albums/s...E/DSCI1102.jpg http://i562.photobucket.com/albums/s...E/DSCI1108.jpg http://i562.photobucket.com/albums/s...E/DSCI1109.jpg |
Re: Loadmaster '47 COE
One hell of a nice project. Love the COE trucks.
|
Re: Loadmaster '47 COE
Nice! Lotta progress and lotta hours in a short amount of time. Looks cool rolled outside.
|
Re: Loadmaster '47 COE
Hell yeah Man!!
|
Re: Loadmaster '47 COE
You are one hard worker, coming along nicely.
|
Re: Loadmaster '47 COE
killer shots man, congrats
|
Re: Loadmaster '47 COE
Thanks all, I checked and it looks like I spend about 15 hours a week working on the truck. So all in all, I am pleased on how much progress is being made. I'm still shooting for being on the road sometime in late March with a big road trip in April. Even though it looks close now it will still need to be blown back apart for chassis work and some underside work on the body. The body should be ready to remove again (3rd time) later this week or next week.
Rob |
Re: Loadmaster '47 COE
60hrs a month isn't bad at all, more than I get. My saying is always add 2 months and more money than you budget!!!! I seem to always be 2 months off my deadlines. Hope you hit yours.
|
Re: Loadmaster '47 COE
It's coming along nicely! Good luck getting it done. I never meet my own dead lines. :lol:
|
Re: Loadmaster '47 COE
Thank you, yea, the deadline is coming up fast, I may need to cut back on some of the details to meet it. I started on the wiring, I am using a 14X24 piece of sheet metal and will mount the electronics behind the seat. This is my first time doing an LS style engine so I've got some things to learn. It's just a few wires so how hard could it be? Famous last words of a fool.
Rob http://i562.photobucket.com/albums/s...E/DSCI1127.jpg http://i562.photobucket.com/albums/s...E/DSCI1130.jpg http://i562.photobucket.com/albums/s...E/DSCI1131.jpg |
Re: Loadmaster '47 COE
More progress on the wiring. The main control panel is 90% complete tomorrow I will mount it and start on adjusting the length of all the wires, solder, heat shrink, repeat 300+ times.
Rob http://i562.photobucket.com/albums/s...E/DSCI1135.jpg |
Re: Loadmaster '47 COE
VERY tidy!!! looks really nice...
AAAHHHH the joy's of wiring!!!:lol: |
Re: Loadmaster '47 COE
Rob that looks great! What is the module in the lower right?
|
Re: Loadmaster '47 COE
That would be the TAC or Throttle Actuator Control module. I'm using a drive by wire system.
Rob |
Re: Loadmaster '47 COE
sure don't look like your first LS wire job LOL. looks proper. I like the behind seat idea, esp since your engine is right there. but obviously you might need to make alot of your other wires longer correct? like interior wire and the front end wiring?
|
Re: Loadmaster '47 COE
That's really clean looking.
Kim |
Re: Loadmaster '47 COE
Well, see that's the thing 99, when I ordered the Painless kit I ordered a universal trunk mount kit. All the wires which normally go from the fuse box to the dash section have about 6 feet added to them. I also bought the kit during a Christmas sale so I got the web split cover loom for free. First LS wiring...yes, first EFI system or complete wiring job...no.
Rob |
Re: Loadmaster '47 COE
Looks really neat. I wish half the crap (new cars) I work on every day had this much attention paid to where things are and where they should be, instead of just haphazardly placed anywhere and everywhere throughout the vehicle. Really Nice job!
|
Re: Loadmaster '47 COE
Quote:
|
Re: Loadmaster '47 COE
Interesting point Oneoffstroker, I had not really giving it a whole lot of concern about clocking the steering U-joints. I understand it for a drive shaft due to vibration and high RPM but it a steering application is it really an issue? On my '46 they are not clocked and to this point I have not had any issues. As a matter of fact, on the donor ('03 Silverado) they where also not clocked. Now on the donor it did use a slip shaft so that may be why it was not a concern.
Rob I've been working on the wiring some more, the flasher relays are a bit close to the rear seat so I may need to shorten the mounting posts for the fuse box. http://i562.photobucket.com/albums/s...E/DSCI1138.jpg http://i562.photobucket.com/albums/s...E/DSCI1142.jpg |
Re: Loadmaster '47 COE
Interesting point Oneoffstroker, I had not really giving it a whole lot of concern about clocking the steering U-joints. I understand it for a drive shaft due to vibration and high RPM but it a steering application is it really an issue? On my '46 they are not clocked and to this point I have not had any issues. As a matter of fact, on the donor ('03 Silverado) they where also not clocked. Now on the donor it did use a slip shaft so that may be why it was not a concern.
Rob I've been working on the wiring some more, the flasher relays are a bit close to the rear seat so I may need to shorten the mounting posts for the fuse box. http://i562.photobucket.com/albums/s...E/DSCI1138.jpg http://i562.photobucket.com/albums/s...E/DSCI1142.jpg |
Re: Loadmaster '47 COE
Circuit board looks good there Rob. Which Painless harness are you using?
|
Re: Loadmaster '47 COE
Looks a little close to me.
I'd probably move them. Your wiring is real clean. Kim |
All times are GMT -4. The time now is 08:49 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com