Re: My new project 86 Silverado
also bit the bullet and got a total stainless bolt kit from totally stainless... should have it next week...
|
Re: My new project 86 Silverado
I am jealous, gotta get my daughter through 3 more years of college....the last kid
|
Re: My new project 86 Silverado
Quote:
|
Re: My new project 86 Silverado
5 Attachment(s)
finally... a break in the weather... got my cab sprayed with 2 coats of epoxy primer.
|
Re: My new project 86 Silverado
Ooooo la la, it's purrrrrty! :metal:
Coming along good man! Keep it up! |
Re: My new project 86 Silverado
Thanks for all the encouragement guys.... like I said, I finally got to epoxy prime the damn cab... now I can sand that down nice and smooth and shoot it with a coat of 2K primer to see where I'm at after I start blocking.
I also ordered all my paint supplies, 2 gallons of color, and clear. I hope to get the front fenders epoxy primed this week, then i'll drag the bed out, and tackle that thing. I think I'll do the doors last because I need to take all the glass, the regulators, all that crap out... but all is looking well so far, slowly but surely coming along. My totally stainless bolt sets shipped today, can't wait to start hanging stuff, and my new rear will be here in a couple of weeks... talk about a happy camper :metal: |
Re: My new project 86 Silverado
Looking forward to the progress! :metal:
I need to get working on mine speaking of all that! my truck is probably feeling a tad bit neglected right now. |
Re: My new project 86 Silverado
Quote:
|
Re: My new project 86 Silverado
:lol: if I only didn't have work till 5:15 I would be my friend.
I need to go to HF to get a wire wheel or something to start working on the inside of my truck. |
Re: My new project 86 Silverado
Very nice!!! Still planning on flat black?
|
Re: My new project 86 Silverado
Quote:
don't forget the swear jar and the beer LOL |
Re: My new project 86 Silverado
Quote:
Kyle over at Kirker said, If I want to go from Hot Rod black, all I need to do is scuff it up with 300 and spray it with color. So i'm not sure If i'm going with color on the body, some flat black on the hood for stripes, or all flat black... hopefully i'll know when I have all the truck blocked down so it's ready to paint. I sure do like the flat black though :metal: |
Re: My new project 86 Silverado
Quote:
Going to try and pick up a wire wheel this week though I have to find one that'll fit a drill though. |
Re: My new project 86 Silverado
can't go wrong with flat black....lol
|
Re: My new project 86 Silverado
Quote:
|
Re: My new project 86 Silverado
received all primers, catalyst, paint, activators, clean up materials today!!!!!!
received my totally stainless complete bumper to bumper bolt kit today!!!! finally! I can start bolting all my stuff on tomorrow and the coming days/weeks. I'll be glad when my 9" Ford rear end gets here so I can have a rolling frame, dang i'm excited that all my parts are finally getting here !!!!! |
Re: My new project 86 Silverado
man you're doin a damn good job!
|
Re: My new project 86 Silverado
Quote:
|
Re: My new project 86 Silverado
Quote:
|
Re: My new project 86 Silverado
5 Attachment(s)
got lower control arms on, and both drop spindles.... used all hardware from the Totally Stainless kit...
|
Re: My new project 86 Silverado
1 Attachment(s)
one last one... off to auto parts to get grease so I can throw on the front hubs/rotors...
|
Re: My new project 86 Silverado
4 Attachment(s)
installed seals/bearings/rotors, calipers, wheels...
|
Re: My new project 86 Silverado
How close is the front rim to the spindle?
|
Re: My new project 86 Silverado
1 Attachment(s)
Quote:
|
Re: My new project 86 Silverado
Coming along well! What back spacing is on the rims? All you need now is the rear, hope you get that soon.
|
All times are GMT -4. The time now is 11:02 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com