The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Squarebody Projects and Builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=139)
-   -   Jim Bob a build thread (https://67-72chevytrucks.com/vboard/showthread.php?t=421767)

Wasted Dragon 05-18-2013 12:07 AM

Re: Jim Bob a build thread
 
Awesome build man, and I like the placement of the head unit above the Air controls. I have mine under it and the linkage from the air control unit will get caught, so I can't really use it. Not that it's useful at all anyways lol.

motornut 05-21-2013 08:51 AM

Re: Jim Bob a build thread
 
Quote:

Originally Posted by Wasted Dragon (Post 6077212)
Awesome build man, and I like the placement of the head unit above the Air controls. I have mine under it and the linkage from the air control unit will get caught, so I can't really use it. Not that it's useful at all anyways lol.

thanks
i havn't had time to finish and trim up the Jimmy yet but getting some ideas
when I swap the newer tilt coloum(88) i'm going to end up with the 89 bezel(wood grain)
crossover will be going in then,taking up the "gap"
I worked out the design last week for speaker boxes where the rear ashtrays were

motornut 05-28-2013 10:06 PM

Re: Jim Bob a build thread
 
4 Attachment(s)
got the last bit of stump and tree out

motornut 10-04-2013 09:52 AM

Re: Jim Bob a build thread
 
5 Attachment(s)
seen this 56 the other day,not much goin on with the 78 right now

motornut 02-18-2014 05:50 PM

Re: Jim Bob a build thread
 
We take the 78 for the winter storms
I love the 4X4,no probs with it,keep the shifter lubed,it works great
the 31s are a pain in the deep snow,tracking in others ruts is fun,
gona swap to stock skinnys next winter.
did the christmas parade this year,my half hour version
had to add music the exhaust sounded terrible...

motornut 02-18-2014 06:04 PM

Re: Jim Bob a build thread
 
first storm

motornut 02-18-2014 06:06 PM

Re: Jim Bob a build thread
 
caught a rear ender,while doing a move,nobody got hurt tho

motornut 02-18-2014 06:18 PM

Re: Jim Bob a build thread
 
dashcam also caught a girl running a stop sign,she would have hit me if I didn't stop

motornut 02-20-2014 11:26 PM

Re: Jim Bob a build thread
 
3 Attachment(s)
finally replaced my "temp"speaker boxs,just using a board for now sounds/looks better tho

motornut 02-20-2014 11:40 PM

Re: Jim Bob a build thread
 
5 Attachment(s)
Tore out my Dads bathroom,ahhhh power tools to the rescue
surprise (we were just going to replace the toilet 2 weeks ago) lol
no back seat and 530lbs later.....

kikkegek 01-04-2015 10:02 AM

Re: Jim Bob a build thread
 
always fun to read your updates bro

motornut 01-14-2015 09:13 PM

Re: Jim Bob a build thread
 
thanks I've thought I should go over the cluster swap a bit better.
I didn't take too many final wiring shots.

motornut 01-14-2015 10:20 PM

Re: Jim Bob a build thread
 
5 Attachment(s)
out comes JimBob for the winter

motornut 01-14-2015 10:22 PM

Re: Jim Bob a build thread
 
1 Attachment(s)
only had a couple of snow storms so far,and ice storm too

motornut 01-14-2015 10:34 PM

Re: Jim Bob a build thread
 
5 Attachment(s)
-28 and colder with the windchill.
Got hit in the work van while it "was parked "
Guy hit black ice before the snow bank,up the sidewalk
hit street lamp post,drivers side(street light fell on snowbank)
hit restaurant sign post on pass side,
and still enough push to turn van around 180 degrees(parked facing street)....
boss says "nobody got hurt" the rest can be fixed...

well I'm sure that 17 teen year olds' truck is a write off.

kikkegek 01-15-2015 04:13 AM

Re: Jim Bob a build thread
 
glad you are OK buddy!

motornut 01-16-2015 11:17 PM

Re: Jim Bob a build thread
 
Havn't heard how bad the van is yet but told it's @ $80,000 to replace it.
and months to make it

motornut 01-22-2015 04:26 PM

Re: Jim Bob a build thread
 
Yup toasted that one, got a rental.....

motornut 02-06-2015 04:24 PM

Re: Jim Bob a build thread
 
5 Attachment(s)
how it looked when bought new 2010
after floor modded
brought out on the loader for clean out
my "new" heated white leather seats,prob for the 78
about an inch wider track

motornut 04-28-2015 10:22 PM

Re: Jim Bob a build thread
 
We got a new 2015 dodger Van,seems Shoppers Drug Mart has them made up now in stock.
we've already got 5,000k on it.
Doubt I'm gona put those seats in....

motornut 04-28-2015 10:37 PM

Re: Jim Bob a build thread
 
5 Attachment(s)
Got the house in order over the winter.
Got some oak trim done for the cupboards
Patio door all sealed up now,the dogs happy

motornut 04-28-2015 10:58 PM

Re: Jim Bob a build thread
 
5 Attachment(s)
We've decided to close up the yard...
whoever ripped up the hedge,really made a mess,thinned it right out,it's dying
thought maybe some lattace,@40$ per sheet it looks good.
We thought snow fencing,but would not stop another dog
Turns out Rona had a clearance sale on 6' chain link.
those three rolls (130+ ft)and a 4X3 gate $100.
Drove to every store around me looking for more....none
Stopped at a pro fence place,they were nice,and gave me 20% off cause I was paying full price for another roll tho to finish it off the same.

motornut 05-11-2015 10:17 PM

Re: Jim Bob a build thread
 
5 Attachment(s)
10 loads of leaf and yard waste....to the dump

motornut 05-11-2015 10:29 PM

Re: Jim Bob a build thread
 
5 Attachment(s)
quite the pile.... gone now
thinking of gravel for under where the truck parked.
remove most of the curb too,prob to the back tire


All times are GMT -4. The time now is 02:03 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com