Re: Power Brake Booster Adapter Bracket
Send me a pm 61 suburban
|
Re: Power Brake Booster Adapter Bracket
I assume GM went with the bellcrank assembly to change the pedal ratio to one better suited to power brakes.
Yes you will have to remove the bolts attaching the pedal bracket to the firewall since my booster brackets use all of those attachment points just as GM designed it to be. This is a very important criteria that many people overlook or don't seem to care about. Automotive brakes is not a place to cut corners. If you connect the pushrod to the original manual brake pushrod hole in your brake pedal arm, your brakes may be touchy. If so, just drill another hole in the brake pedal arm 1" lower and try that. Quote:
|
Re: Power Brake Booster Adapter Bracket
John, I received my bracket today. Beautiful part. Thanks again
Brett |
Re: Power Brake Booster Adapter Bracket
Thanks for the compliment and the purchase Brett :)
|
Re: Power Brake Booster Adapter Bracket
John, just sent PM. It’s going on my 64. Brake Booster only in BLACK. Thanks, Tony
|
Re: Power Brake Booster Adapter Bracket
PM received as well as payment. I replied to your PM.
|
Re: Power Brake Booster Adapter Bracket
Hello, Going to the junkyard to gather the rest of my parts for my 65 C20 disk brake swap from a 78 C20. Will the booster and master cylinder work with your bracket? Or should I get a 88-98 1/2T booster and use the 78 master cylinder. Thank you for all the help you provide to everyone!!
|
Re: Power Brake Booster Adapter Bracket
None of the '73-'87 boosters are compatible with any of my booster brackets. They have the factory mounting brackets welded to them. That is why they are not on the list of compatible boosters. Yes you can use your '78 master cylinder as long as you use a booster that has the same length intermediate pushrod as the '78 booster. It should be the short one, but I would suggest checking.
Quote:
|
Re: Power Brake Booster Adapter Bracket
Captain Fab,
I sent you a PM as well and I need to get a bracket ordered ASAP. Can you reply and give me a call if you have a minute please. Thanks very much! |
Re: Power Brake Booster Adapter Bracket
I replied to your PM. I have time to be here on the forum only once a day after I get home from my 11-12 hour workday.
Quote:
|
Re: Power Brake Booster Adapter Bracket
Captinfab what can I use for my 1963 P10 step van I need a power booster but I have no room or a hood.
|
Re: Power Brake Booster Adapter Bracket
I am not that familiar with the P series vans' firewall. Can you post a pic either here or email to captainfab454@hotmail.com ? You might be able to use a booster and master from either an Astro/Safari or full size G series van.
Quote:
|
Re: Power Brake Booster Adapter Bracket
4 Attachment(s)
Quote:
|
Re: Power Brake Booster Adapter Bracket
Well for starters, that has the hydraulic clutch as the '60-'62 Chevy's and '60-'63 GMC's do. So you would need my '60-'62 booster bracket to start with. Is that some sort of brace I see directly in front of the master cylinder? There are a couple of P series vans here on the forum in the '60-'66 projects and builds section. I do not remember what they used for a booster/master assembly
|
Re: Power Brake Booster Adapter Bracket
2 Attachment(s)
Quote:
|
Re: Power Brake Booster Adapter Bracket
I make the '60-'62 booster brackets for use with an auto trans. Here is that for sale thread.
http://www.67-72chevytrucks.com/vboa...d.php?t=357542 Here is one of the build threads that I was talking about. http://www.67-72chevytrucks.com/vboa...ighlight=P+van |
Re: Power Brake Booster Adapter Bracket
I will take one
|
Re: Power Brake Booster Adapter Bracket
I will send you a PM.
Quote:
|
Re: Power Brake Booster Adapter Bracket
bowties11 your PM inbox is full and I can not reply to your PM's
|
Re: Power Brake Booster Adapter Bracket
1 Attachment(s)
Hey Captain,
I am kinda new to this site. I just picked up a 63 Suburban. I will be installing front and rear Wilwood disks on a new chassis along with a Caddy 472/TH400 combo to replace the stock 6 cylinder. Attached is a photo of my current firewall/MC, I just want to verify that I am ordering the correct MC adapter of yours. Also, do I just PayPal you for it? I apologize if you have all this info in this thread, but I'm going through 17 pages and trying to work!!! * And one more "Also" - Do I need to lengthen the pushrod for the install? EDIT: I just saw your email address and sent you an email also. Thanks for your time, Eric. |
Re: Power Brake Booster Adapter Bracket
I replied to your email, payment received. Thank you :)
|
Re: Power Brake Booster Adapter Bracket
I'm needing a pb mount and a couple of ps brackets for a 65
|
Re: Power Brake Booster Adapter Bracket
I'll send you a PM with ordering and payment info.
Quote:
|
Re: Power Brake Booster Adapter Bracket
Quote:
|
Re: Power Brake Booster Adapter Bracket
3 Attachment(s)
Here are a couple pics that are more up to date than in post #1. The price is Exactly the same as in post #1. The only options available are satin black powder coating or if you need the hydraulic clutch conversion.
Quote:
|
Re: Power Brake Booster Adapter Bracket
this will work with the CPP unit correct? What are price options with shipping?
|
Re: Power Brake Booster Adapter Bracket
Once you remove the universal mounting bracket that comes with it, yes it should bolt up to my booster brackets.
As stated in post #1 of this for sale thread, the cost in bare steel is $55.00 plus $14.35 for shipping. Quote:
|
Re: Power Brake Booster Adapter Bracket
Sent you an email I would like to purchase a 66 brake bracket.
Thanks |
Re: Power Brake Booster Adapter Bracket
I've been emailing several people the past couple of days. Is your name John Robbins?
Quote:
|
Re: Power Brake Booster Adapter Bracket
After 10 years at the same price, I have had to raise my price due to an increase in my laser cutting costs.
|
Re: Power Brake Booster Adapter Bracket
Hi John, I would like to purchase one of your powder coated power booster brake brackets for my 66 c10. can you please pm me with new total price thank you.
|
Re: Power Brake Booster Adapter Bracket
PM sent.
|
Re: Power Brake Booster Adapter Bracket
Hi John.... I am ready to buy a bracket from you. thanks, John
|
Re: Power Brake Booster Adapter Bracket
Got mine for my 64 GMC, brilliant part and beautifully built. Looking forward to good stops. Nothing beats power steering and brakes.
|
Re: Power Brake Booster Adapter Bracket
PL sent
Quote:
|
Re: Power Brake Booster Adapter Bracket
Thank you for the compliment :)
Quote:
|
Re: Power Brake Booster Adapter Bracket
I need another bracket John, can you PM me your info please?
Posted via Mobile Device |
Re: Power Brake Booster Adapter Bracket
PM sent.
Quote:
|
Re: Power Brake Booster Adapter Bracket
4 Attachment(s)
Got my bracket from Captainfab and was very happy with the quality of his manufactured part, fits and it was professionally cut and bent and drilled. I did not want to drill my firewall on my 64 GMC. At his advice picked up a full size power brake booster from the flaps and I updated to a dual reservoir master cylinger but at this time keeping it all drums so no need for a proportioning valve. I ended up cutting the eye off the booster rod and welding on a 3/8" by 24 thread female coupler on. Then will buy the speedway SSBC A1726 Universal Adjustable Master Cylinder Pushrod Kit to finsh off the pedal linkage. I did not want to cut or adapt the existing brake arm because they are getting scarce. All in all pretty straight forward, next week will see how it all works and will report back.
|
Re: Power Brake Booster Adapter Bracket
Ended up buying this push rod from summit, ran less than $15 and some 3/8" by 24 threads per inch all thread and put it all together. Road trip works like a champ, love the power brakes over the standard, makes it a nice easy driver. Bolting the booster to the bracket went easier than I thought. It is made so you can use a 9/16" open and box end wrench without clearance issues. All in all I give the bracket a solid 10 out of ten and power brake addition a pretty cheap and easy modification for under $200. Cant beat that with a stick.
https://www.summitracing.com/parts/rsd-rc14 |
All times are GMT -4. The time now is 08:17 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com