![]() |
Re: How about some pics of '73-'87 Long Beds Part II
Nice trucks Mellow..
All new body panels on the 4x4 looks like. Mudman. |
Re: How about some pics of '73-'87 Long Beds Part II
Quote:
I just picked up a 2wd dually chassis that I plant to swap my '80 onto this summer. |
Re: How about some pics of '73-'87 Long Beds Part II
Quote:
|
Re: How about some pics of '73-'87 Long Beds Part II
Well it's nice to have two similar but different builds, like the black 2wd, everything just seems to fit the build, the 4wd is looking great, anymore specs or details on both, see you south west of me by about 7-8 hours, my daughter is in university in Saskatoon so get down there a bit and always attend cruise weekend every 3rd weekend of Aug, all booked in this year, maybe see you there.
Mudman. |
Re: How about some pics of '73-'87 Long Beds Part II
Quote:
http://i294.photobucket.com/albums/m...psmxt29l5c.jpg http://i294.photobucket.com/albums/m...psq29hjunh.jpg One more of the 4x4 http://i294.photobucket.com/albums/m...psyp7qkuit.jpg |
Re: How about some pics of '73-'87 Long Beds Part II
Quote:
Thats cool, I didn't even notice your location till now! The 2wd has a pretty healthy 434" BBC, th400 3000 stall, 3.73 gear. 3" spindle and 2" coil, then a flip and c-notch in the rear. It's going to be swapped over on a dually chassis this summer hopefully. Most likely a 4-link bag setup, I want to be able to pull my enclosed trailer with it if need be. May have to detune it a bit for towing. The 4x4 has roughly 5-6" lift and 35's. Stock 400sbc and auto, np203. Its been pretty much my daily driver or when its messy out. I have a couple other trucks I like to keep clean lol. I usually try to get to cruise weekend but didn't this last year, I have a '71 Nova that I sometimes take to the race track. http://i294.photobucket.com/albums/m...psfunjnxdj.jpg |
Re: How about some pics of '73-'87 Long Beds Part II
Have you had the Nova to Saskatoon cruise weekend, sure I saw it there 2 years ago, beauty.
|
Re: How about some pics of '73-'87 Long Beds Part II
Wasn't me, I've never had it at that show.
|
Re: How about some pics of '73-'87 Long Beds Part II
Yenko Nova at the show looked almost identical until I stared at yours more and his had a stock hood, not yours which I like far better, so what times does yours run, just wondering, a good friend of mine has a 69 Nova SS big block car and I built him a 468 for it just over 500hp and he runs it at Gimili, not sure of his times with this new engine but already upped the ante w a new 468 with Dart Iron Eagle heads, ported and more so just over 600hp now, installing that soon, funny his current setup has only 200 plus miles on it and...well us hotrodders are never satisfied, but having fun.
Mudman. |
Re: How about some pics of '73-'87 Long Beds Part II
Ya there are a few clones around, I didn't plan to do the stripes but I needed something to break up the yellow a bit. I like it, but I am tired of getting asked if its a real Yenko lol.
I cruise it a lot, but don't take it to the track as much as I would like. The last run with it in the fall at Swift Current was a 9.51 @144mph. |
Re: How about some pics of '73-'87 Long Beds Part II
2 Attachment(s)
Here Is my DD Shes been real good to me
|
Re: How about some pics of '73-'87 Long Beds Part II
First off there is a lot of pretty freakin bad ass trucks in here!! I love chevys, I always have and always will!! Also I was hoping I could get some feedback from you guys on a build I'm getting ready to start on my 1979 Chevy 3/4 ton long bed?? I'm going to be doing everything myself and would love to get some input from other chevy people that have been there done that to help not only save me some money, but the headache as well. Id greatly appreciate it if you got a few minutes to take a look. I already started a thread and heres the link....
http://67-72chevytrucks.com/vboard/s...=1#post7907843 Thanks Cody |
Re: How about some pics of '73-'87 Long Beds Part II
Hey guys, new here. Working on a build thread, but thought I'd introduce myself here. This is my 78 C10 Big 10 350/350 with a 3.73 rear end. My father-in-law bought it from the original owner's widow in 1982 and my wife came home from the hospital in it. It has vortec heads, Edelbrock intake and carb, an mild cam, and true dual exhaust. When it stopped getting driven regularly, he offered it to me and my wife. I call it an early inheritance. My father-in-law gets all the credit, all I have had to do is drive it the past 4 years. Some big changes in the works though!
http://i.imgur.com/GSx9uV9l.jpg https://i.imgur.com/Eppz1dsl.jpg https://i.imgur.com/bYltx3zl.jpg |
Re: How about some pics of '73-'87 Long Beds Part II
My 81 from jan 2nd 2017 to today with not much sleep inbetween
|
Re: How about some pics of '73-'87 Long Beds Part II
5 Attachment(s)
Guess i should post some pics
|
Re: How about some pics of '73-'87 Long Beds Part II
Quote:
|
Re: How about some pics of '73-'87 Long Beds Part II
Normally I just browse the forum but I finally made an account to post of pic of my 84 High Sierra.
Its an all original 305 V8 Auto Rwd around 136000km. Just pulled it out again for summer. https://lh3.googleusercontent.com/g8...B=w610-h911-nohttps://lh3.googleusercontent.com/ti...=w1136-h640-no |
Re: How about some pics of '73-'87 Long Beds Part II
Still looks pretty solid for an 84.
Mudman. |
Re: How about some pics of '73-'87 Long Beds Part II
It is pretty solid, runs good. Needs some work but still good to daily drive right now. I plan to slowly pick away at it
|
Re: How about some pics of '73-'87 Long Beds Part II
1 Attachment(s)
This is my brand new-to-me 78 GMC, picked up on the cheap, that will be my dump runner/rolling project. Very excited at the possibilities!
|
Re: How about some pics of '73-'87 Long Beds Part II
Quote:
|
Re: How about some pics of '73-'87 Long Beds Part II
The 78 Gmc looks good for 1 pic, any more.
Mudman. |
Re: How about some pics of '73-'87 Long Beds Part II
1 Attachment(s)
I just finished putting a 4" lift on today. It needs some steering adjustments made due to the dropped pitman arm and the sway bar needs to be reattached. Waiting on some wheels/Fuel "Mavericks"
|
Re: How about some pics of '73-'87 Long Beds Part II
Big blue is looking pretty tall w only 4' lift, what size tire will you be running.
Mudman. |
Re: How about some pics of '73-'87 Long Beds Part II
Hopefully it looks taller than 4". I went with the shackle flip, per research on this forum, on the rear with Heavy duty shackles and for the front I went with the 4" tuff country HD springs and shackles. I picked everything up from off-road designs. It all could actually be taller than 4", but I'm glad you think so.
For tires, im gonna initially hang with some 285/60 r20 Michelin or firestone/ dealer takeoffs. Essentially a 33.5-34.5 ish tall and 11"ish wide. I blew my wad on wheels this go around. So replacements down the road may be something a lil cooler looking. |
Re: How about some pics of '73-'87 Long Beds Part II
Well building a car or truck is one step at a time for us normal budgeted people, cool to see the lift, gives an idea of what's coming, nothing but better.
Mudman. |
Re: How about some pics of '73-'87 Long Beds Part II
2 Attachment(s)
Here are some pics of Big Ugly after the new wheels and tires. I'm pleased with how she looks.
|
Re: How about some pics of '73-'87 Long Beds Part II
Quote:
|
Re: How about some pics of '73-'87 Long Beds Part II
I believe the brand is Iconic, and they are the factory style running boards. ABS plastic with aluminum support on the underside. Pretty sturdy👍
|
Re: How about some pics of '73-'87 Long Beds Part II
Well that is way nicer, don't see the ugly though just coolness.
Mudman. |
Re: How about some pics of '73-'87 Long Beds Part II
Thanks madman. I like the way it turned out. I wouldn't mind it a little taller, but I'm battling driveline and pinion angles right now and I believe it would be pushing limits of drive ability and comfort with much more lift.
|
Re: How about some pics of '73-'87 Long Beds Part II
1 Attachment(s)
Quote:
It needs a good bit of sorting out and will very likely need a new motor soon but IDGAF!!! Imma drop it on its chin and bash the **** out of it until something pops and then a carbed LS will make its way into the mix. Teaser shot of some new footwear... |
Re: How about some pics of '73-'87 Long Beds Part II
1 Attachment(s)
84 Chevy on 05 frame. 6.0 4l80 3 link Dana 60 coils 14 bolt 456s
|
Re: How about some pics of '73-'87 Long Beds Part II
1 Attachment(s)
Goals for my 77 bonanza. Currently awaiting lots of parts. got the axle flipped and the front drop spindles going on tonight. Looking for a CNC water jet cutter that is willing to cut the rally wheel holes into a set of 22" transits for me. Like i said goals. Ill post pictures once i get it back on the ground tonight. Hopefully.
|
Re: How about some pics of '73-'87 Long Beds Part II
1 Attachment(s)
Wheels on, repping that squarebody!!
|
Re: How about some pics of '73-'87 Long Beds Part II
1 Attachment(s)
Here's my 79 C/20 Silverado original paint no rust
|
Re: How about some pics of '73-'87 Long Beds Part II
2 Attachment(s)
Just picked up my first Square body.
1st picture is after a bath and removal of the running boards. 2nd picture is the truck lamenting in the previous owners driveway. |
Re: How about some pics of '73-'87 Long Beds Part II
5 Attachment(s)
1977 Gmc original 39,000 miles on body and interior. High Performance 355 c.i motor ,T.c.i sizzler th350 with 9 inch stall converter,Auburn limited slip diferrential. With 4:11 gear...just using as a cruise night truck needs big meats in back for some traction.Will be adding some Wider tires but a little pricey for setup Im wanting...Want to keep original hubcaps..
|
Re: How about some pics of '73-'87 Long Beds Part II
Nice truck Tone210.
|
Re: How about some pics of '73-'87 Long Beds Part II
1 Attachment(s)
Quote:
|
All times are GMT -4. The time now is 10:21 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com