The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Heavy Haulers (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=239)
-   -   The Ulitmate Craigslist find thread (https://67-72chevytrucks.com/vboard/showthread.php?t=656427)

VictoriaHardware 11-16-2017 01:47 PM

Re: The Ulitmate Craigslist find thread
 
Quote:

Originally Posted by 83GMCK2500 (Post 8081756)
Here's the pics from that link.

Just judging from the pics, that C80 is a peach. Even with shipping would be a great start for a well-optioned truck. It no doubt will need lots of maintenance to get roadworthy again, but you would be hard pressed to find a better starting point. I sure hope it goes to a good indoor home.

C10 - C90 Bill 11-16-2017 02:21 PM

Re: The Ulitmate Craigslist find thread
 
Quote:

Originally Posted by 83GMCK2500 (Post 8083756)
I feel like Bill is really gonna dig this one.

Pretty cool truck.

Thanks for posting it.

Strange that it is only a 5000 though. At first glance, I was sure it was a 6500.

Mostly likely means that it is a 401 V-6, instead of a 478.

Love the 5 X 3 Trans it has. My 6500 was just a 5 and 2-Speed Rear.

The Differential Lock means both Rears are locked in and turning.

Greg58 11-18-2017 10:39 AM

Re: The Ulitmate Craigslist find thread
 
Here is a 53 GMC 2Ton that I spotted, it looks like it is in Iowa.

https://omaha.craigslist.org/cto/d/1...375741640.html

Greg

factorystock 11-23-2017 05:42 PM

Re: The Ulitmate Craigslist find thread
 
1 Attachment(s)
Quote:

Originally Posted by factorystock (Post 8082921)
GVW is not much more than a heavy 60 series, but you get the 18.K rear axle and 7k or 9K front axle.

Most 63-66 C80's will have the narrow fenders, unless it has the 9K or 11k front axle. Can't tell from the photos if the green '65 C 80 has the wide or narrow fenders, but here is the comparison shot between the lighter and heavier front ends.

C10 - C90 Bill 11-23-2017 08:55 PM

Re: The Ulitmate Craigslist find thread
 
Good picture to see the comparison between the two.

I always wondered why GM made the narrow starting in '63, but I recently saw a factory advertisement on it saying that drivers prefer the better clearance.

I always drove the wides out of co-incidence and clearances were never a problem.

Never even had a thought that it could be one of the reasons why, lol.

C10 - C90 Bill 11-23-2017 09:37 PM

Re: The Ulitmate Craigslist find thread
 
I found the info on the narrow fenders and it is actually in a promotional film. The particular info on it starts at about time 3:08.


factorystock 11-25-2017 02:35 PM

Re: The Ulitmate Craigslist find thread
 
Quote:

Originally Posted by C10 - C90 Bill (Post 8088910)
I found the info on the narrow fenders

Thanks for posting film, nice to see my statements are accurate.

cam.man67 11-27-2017 11:16 PM

Re: The Ulitmate Craigslist find thread
 
1 Attachment(s)
Here's a pretty nice '65 GMC 5509 for sale:

https://lancaster.craigslist.org/grd...377784991.html

allchevy58 11-29-2017 12:32 AM

Re: The Ulitmate Craigslist find thread
 
Quote:

Originally Posted by cam.man67 (Post 8091889)
Here's a pretty nice '65 GMC 5509 for sale:

https://lancaster.craigslist.org/grd...377784991.html

Nice looking truck!

Dannny B 11-29-2017 10:45 AM

Re: The Ulitmate Craigslist find thread
 
Quote:

Originally Posted by C10 - C90 Bill (Post 8088910)
I found the info on the narrow fenders and it is actually in a promotional film. The particular info on it starts at about time 3:08.

www.youtube.com/watch?v=aht7fRgnFcw&index=2&list=PL9ctf-QM7gcmDO_b7Ixjshk2hb4UxuGla

i couldn't get the embedded video to load so, I'm posting it without embed. It is a great vid

Jeffh 12-29-2017 09:23 PM

Re: The Ulitmate Craigslist find thread
 
Not exactly a Craigslist find but online anyway
Me thinks somebody did all right taking this 61 Viking home for $775

bigiron.com/Lots/1961ChevroletViking60GrainTruck

68panelman 12-29-2017 09:28 PM

Re: The Ulitmate Craigslist find thread
 
Nice score! Appears to have the 261 big six. Great running engine

C10 - C90 Bill 12-29-2017 10:03 PM

Re: The Ulitmate Craigslist find thread
 
Other than a few dents, sheet metal looks great.

They sure did take a bunch of pictures:

https://www.bigiron.com/Lots/1961Che...ng60GrainTruck

Greg58 01-10-2018 08:24 PM

Re: The Ulitmate Craigslist find thread
 
Not CL, but an online auction in Kansas.
Looks to be a clean low mileage 1969 C-50 with a BBC 366.

Greg

https://www.purplewave.com/auction/180206/item/DC8379

83GMCK2500 01-24-2018 03:29 PM

Re: The Ulitmate Craigslist find thread
 
5 Attachment(s)
1980 Gmc 9500 m - $12000 (Greenbush) (Link)

80 Gmc 9500 long hood. 8v71 Detroit. Ten speed. Truck is very nice for age. Came out of the south. Sat for ten years in a shed.

C10 - C90 Bill 01-24-2018 03:39 PM

Re: The Ulitmate Craigslist find thread
 
Interesting truck, although the year is way off.

Should be a '70 to '72.

Would love to have it, but ouch on the price, lol.

83GMCK2500 01-24-2018 04:55 PM

Re: The Ulitmate Craigslist find thread
 
I doubted the year, thank you for confirming my suspicions. I went on a 9500 search after reading your recent thread about the one you drove with the 637. Do you have any pictures of the air cleaner arrangement on these? I'm sure it varies by engine but I just noticed that it doesn't have canisters hung outside the hood.

C10 - C90 Bill 01-24-2018 06:50 PM

Re: The Ulitmate Craigslist find thread
 
The 9500, Gas and Diesels, have the Air Cleaner under the hood. I believe it can be seen on the '72 9500 with the 8V-71 that I went to look at a couple of years ago. There should still be pictures of it here on the forums. I took the pictures and Bill (63 & 64 Bowties) posted them for me. I'll try to find them.

C10 - C90 Bill 01-24-2018 07:23 PM

Re: The Ulitmate Craigslist find thread
 
I found the pictures, but the ones I took don't show the Air Cleaner as good as the original listing does. Check out the pictures here: (click onto "More Media" for all the pictures. You will also see a short video of the truck here as well).

https://www.govdeals.com/index.cfm?f...98&acctid=2455

By the way, this truck is very similar to the truck that you posted today.

factorystock 01-28-2018 09:49 PM

Re: The Ulitmate Craigslist find thread
 
Not on craiglist, but ebay A '64 C 80 with heavy specs. big block, air brakes and big Eaton rear axle.https://www.ebay.com/itm/1964-Chevy-...1aasNd&vxp=mtr

C10 - C90 Bill 01-29-2018 12:24 AM

Re: The Ulitmate Craigslist find thread
 
Interesting truck.

I agree with the write-up, the Hood looks like the worst part which can be easily changed.

The GVW of 33,000 probably means 11 Fronts and 22 Rears.

Nice heavy truck.

Another Hood, a little body work and paint would make a big difference.

jumpsoffrock 02-09-2018 10:06 PM

Re: The Ulitmate Craigslist find thread
 
5 Attachment(s)
andrewmp6 posted this:
https://louisville.craigslist.org/ct...481663483.html

Quote:

Selling my 1962 GMC 4000 flatbed truck with 40,000 lbs winch. This used to be a logging truck from Tennessee. Neat old truck. Cab and doors are rust free. Runs good with a 366 big block. Two speed rear. PTO that powers the winch. Thanks for looking

jumpsoffrock 02-09-2018 10:08 PM

Re: The Ulitmate Craigslist find thread
 
5 Attachment(s)
Oh and the rest.

HO455 02-20-2018 10:33 PM

Re: The Ulitmate Craigslist find thread
 
3 Attachment(s)
62 40-50-60? Perfect for the folks who like to bring heavy stuff home. $2990!

https://seattle.craigslist.org/est/c...501223478.html

1962 Chevrolet dump truck with with cherry-picker. Later model Chevy V8 engine, very low model tires. Original family owned. Needs some TLC. $2,990

C10 - C90 Bill 02-21-2018 09:39 AM

Re: The Ulitmate Craigslist find thread
 
A '62 LCF-60.

Would be a great restoration project.

83GMCK2500 02-21-2018 03:00 PM

Re: The Ulitmate Craigslist find thread
 
That thing has got a heavy front axle, wow! It's near me...if only I had someplace to park it...that chassis has rollback or ramp truck written on it to me.

C10 - C90 Bill 02-21-2018 03:50 PM

Re: The Ulitmate Craigslist find thread
 
I agree, it would make a nice Rollback.

stsalvage 02-21-2018 04:04 PM

Re: The Ulitmate Craigslist find thread
 
Trucks like these are begging for a 6.0 with the Allison 6-9 speed auto and use the splitter rear end.I hate seeing these trucks waist away.I hope in the next few years i can buy a few and stick the 6.0 with the auto and make them worth driving again with new power steering and hydro boost power brakes.These trucks can be Re engineered for long term use.Removing the gas take and putting a fuel sell on the side of the truck Update all the running gear.you have a truck that will get good gas mileage plus it will be a dream to drive

NoStopN 02-21-2018 08:20 PM

Re: The Ulitmate Craigslist find thread
 
I wouldn't stick with a gas engine for something like that LCF. A project like it would need a new engine, so I'd try to find a Duramax V8 with an Allison.

NoStopN 02-21-2018 08:37 PM

Re: The Ulitmate Craigslist find thread
 
Even when I'm not looking for parts for my truck, I keep finding more trucks. And why do I always find the flatbeds? https://atlanta.craigslist.org/eat/c...501537539.html The no title situation always scares me.

C10 - C90 Bill 02-21-2018 08:56 PM

Re: The Ulitmate Craigslist find thread
 
I've got a different idea for the LCF, lol.

A 4-53T Detroit with a 10-Speed Road Ranger.

stsalvage 02-21-2018 09:26 PM

Re: The Ulitmate Craigslist find thread
 
So your saying the 6.0 LS with the Allison is not a good combo for the C40--C80 1964--66 trucks.Can you explain why the 366 or 6.0 LS engine would not be a good combo.The Duramax V8 with an Allison.its a little pricey.I just want to know what are the take a way's from using the gas to using the Duramax.I've had a 1964 c60 a few years ago love the body stance and the way they looked and how they drove

Can you make the 2 speed slitter work with the Allison

Dannny B 02-21-2018 11:26 PM

Re: The Ulitmate Craigslist find thread
 
Quote:

Originally Posted by C10 - C90 Bill (Post 8194311)
I've got a different idea for the LCF, lol.

A 4-53T Detroit with a 10-Speed Road Ranger.

,,,,, And a case of earplugs.
https://www.youtube.com/watch?v=7368eCCwr6A

83GMCK2500 02-21-2018 11:31 PM

Re: The Ulitmate Craigslist find thread
 
Quote:

Originally Posted by Dannny B (Post 8194529)
,,,,, And a case of earplugs.
https://www.youtube.com/watch?v=7368eCCwr6A

Naaaaaaaah! :lol::D I'm with Bill on that choice. When I was old enough to ride with my dad in his Astro 95 moving pieces of his farm equipment I used to fall asleep to the sound of the 6-71 under me. :metal:

C10 - C90 Bill 02-22-2018 12:48 AM

Re: The Ulitmate Craigslist find thread
 
Quote:

Originally Posted by Dannny B (Post 8194529)
,,,,, And a case of earplugs.
https://www.youtube.com/watch?v=7368eCCwr6A

Lol, I used to own a '67 7500 that sounded exactly like this one with the 6V-53:


C10 - C90 Bill 02-22-2018 12:56 AM

Re: The Ulitmate Craigslist find thread
 
Quote:

Originally Posted by stsalvage (Post 8194358)
Can you make the 2 speed slitter work with the Allison

I believe you are referring to a 2-Speed Rear and I've never driven one with an Auto Trans, but I have heard that yes, it is supposed to work.

NoStopN 02-23-2018 08:05 PM

Re: The Ulitmate Craigslist find thread
 
Quote:

Originally Posted by stsalvage (Post 8194358)
So your saying the 6.0 LS with the Allison is not a good combo for the C40--C80 1964--66 trucks.Can you explain why the 366 or 6.0 LS engine would not be a good combo.The Duramax V8 with an Allison.its a little pricey.I just want to know what are the take a way's from using the gas to using the Duramax.I've had a 1964 c60 a few years ago love the body stance and the way they looked and how they drove

Can you make the 2 speed slitter work with the Allison

It's just personal choice. A factory 6.0 LS (364 cubic in.) is only rated for 380 lb.-ft. of torque. That's more than most engines from the '60s, but even the earliest Duramax makes around 500 lb.-ft. Honestly, I can't speak as to what would fit with a split rear end, but you could attempt to contact Advanced Adapters. They claim they make the widest selection of adapters. Even if they would help on that kind of project, you (or whomever) would be the first ones to do it. You might have better luck getting an adapter made for mating the Duramax to a manual transmission that can handle the torque. You can take all of this talk into consultation, because I really know very little about trucks larger than a C30/GMC 3500.

Dannny B 02-23-2018 09:59 PM

Re: The Ulitmate Craigslist find thread
 
Quote:

Originally Posted by C10 - C90 Bill (Post 8194590)
I believe you are referring to a 2-Speed Rear and I've never driven one with an Auto Trans, but I have heard that yes, it is supposed to work.

I played mix-an-match with a 392, 4 Bbl IH and an Allison in a truck with an Eaton 2 speed axle.. Just back off a tiny bit and shift. It wokled fine.

5Tractorguy 02-25-2018 12:29 PM

Re: The Ulitmate Craigslist find thread
 
1 Attachment(s)
I can't get enough of this one...

https://syracuse.craigslist.org/cto/...492479895.html

Attachment 1756608

C10 - C90 Bill 02-25-2018 01:26 PM

Re: The Ulitmate Craigslist find thread
 
I believe that truck has the 503 in it.


All times are GMT -4. The time now is 03:50 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com