Re: What did you do to your truck today!
 

went and check out the bed paint job ,tomarow the cover gets installed its paint to match also ,so this weekend will be cruzin it ,

Re: What did you do to your truck today!
 

Started toying with my gauge layout. Not sure if the two 4" gauges (speedo + turn signals & high beam indicator, and quad gauge) plus 2 5/8 center mounted tach have enough to them to look good.

Thoughts?

Re: What did you do to your truck today!
 

Once you put your headlight and wiper switch in, that'll help fill it up.

Re: What did you do to your truck today!
 

I cut up some steel to finish boxing in my rear bumper, and to make some seat brackets.

Re: What did you do to your truck today!
 

Broke down & put my 71c10 lwb/ big block buick for sale on craigs list, no time to work on it anymore. Wifes happy about it i'm not!

Re: What did you do to your truck today!
 

Rewired the starter, had to adjust brake light switch so brake lights would not stay on, minor adjust to carb, fired it up for first time since last November. Drove around the yard, aired the tires, installed new plates and registration. Need inspection and then road test for reliability. Long time coming.

Re: What did you do to your truck today!
 

The factory tint door glass from eBay arrived. Unfortunately, the window run channels did not. I installed the driver side glass anyway, since there was none previously. It could rain tomorrow, who knows?

Installed the el cheapo seat cover I bought after augmenting the remains of the original foam with bits and pieces scrounged here and there. It looks like crap, but will do for now.

Still fighting an idle problem, the 350 acts like it has a vacuum leak. Idles all over the place and dies when put in gear. I verified the timing is correct, but have to turn the idle up and richen the idle mixture to keep it running. It has an Edelbrock (Carter AFB) carb on an adaptor plate (Q-jet manifold). Installed new gaskets above and below the spacer, no improvement. I have a rebuild kit for the carb, but didn't feel like diving into that today. Maybe tomorrow. Irritating.

Cleaned and de-rusted (polished) the drivers side chrome channel that holds the door panel. Since there is no door panel, it seemed convenient.

Cleaned and polished the PRND2L lens. I can almost see through it now, a great improvement! Onward and Upward.

Re: What did you do to your truck today!
 

New front brake pads. That squeak was driving me nuts!

Re: What did you do to your truck today!
 

Finally got some time to work on the trucks today. My brother came by and helped me and my son pull the engine and trans out of the parts truck today. I will try to finish stripping the truck down tomorrow.

Re: What did you do to your truck today!
 

drove it

Re: What did you do to your truck today!
 

got my 3 inch lowering rear leaf springs in friday, got to put them on today and the shackles too,,, bolts would not go through the eyelets so had to drill them out some.. but worked out well.... guess i need to get some pics put up too...

Re: What did you do to your truck today!
 

I put the trickle charger on mine today before I left for work.;):chevy:

Re: What did you do to your truck today!
 

Installed a new 1 inch, phenolic, 4 hole spacer in between the edelbrock performer intake and the 1406 carb. seems to have stopped the hard starts after it warms up. Drove it about 60 miles today with my two boys. They dig cruising in dads old truck.

Re: What did you do to your truck today!
 

Got my fronts in from UPS, mounted balanced and on the truck.

Re: What did you do to your truck today!
 

well, I was out in the garage working on this furniture project, kept looking at my truck feelin all guilty that it hasn't turned a wheel in I don't know how long. Then an Indiana Jones movie came on the TV, So I had a beer and well,,,, maybe tomorow

Re: What did you do to your truck today!
 

Took the kick panel vents apart so I could vacuum out the the dead leaves. Cleaned and oiled everything before putting them back together so they open and close easier and quieter. Very nice on a hot day to be able to open those vents without being blasted by bits of dry leaf!

Re: What did you do to your truck today!
 

I ran into a very similar problem with my lift kit. I could not get the bolts back out of the rear of the front leaf springs. I had to slide my sawzall in there and cut them out. There was no metal sleeve in there and the bolts had rusted/melted to the rubber.

I couldn't get my bolts through the new sleeves either, and installed everything without them.

Re: What did you do to your truck today!
 

Are those the Boss wheels? Looks great against the black frame.;):chevy:

Re: What did you do to your truck today!
 

Since I'm gimped out from work right now, I'm relying on my 16 year old to do most of the work. He got the 2" dropped coils put on the front and and 4" dropped in the rear almost done. That and the new car style rallys change the whole look of the truck. Next week I hope to have the dropped spindels and lowering blocks ready for him to put on. LOL

Re: What did you do to your truck today!
 

No. Very similiar, they are like a cross between the Coys and the Boss wheels. Straight bolt on, no modification needed with good B.S. Showwheels Streeters, bout the same maybe a bit less than the Boss setup.

Only potential downside to them is the brand is carved into one of the spokes, but I don't mind it, especially for the price.

Re: What did you do to your truck today!
 

Love the wheels. Can you give more info on them?

Re: What did you do to your truck today!
 

Finished the paint on the cab today, put wedge plates on the rear axle to readjust pinion angle, finished the frame rails.

Re: What did you do to your truck today!
 

Had a wedding yesterday...UUg. Blew my saturday. Rushing out to start stripping cab
and if my help arrives I`ll get the box off today to see what I got.

Re: What did you do to your truck today!
 

resized newer pictures of truck, .... yep,.. that one hole in passenger floorboard has to be Rifle bullet hole. ... exited close to dead center of tire, ... might explain why truck only had 3 original steelies when I baught it.:lol:... I had never noticed or thought about that hole till just the other day when I saw it........ I baught new oil for it and need to get rear lights to quit blowing fuse.


perfect weather to work on truck or to blow it off for another day. time will tell.;)

p.s .. the dual floor consoles cost 120$ .... on sale at 79$ closeout.

p.ss. it has good oil pressure, the key was just on for a second to get picture.

Re: What did you do to your truck today!
 

My nephew killed his Ford Ranger several years ago with a 30.06. Why the rifle was loaded in the cab, I don't know, but the round went through the floor, took out a transmission line, hit the frame and fragments went through an A/C hose, the radiator and the A/C condenser. It was an expensive day for him.