![]() |
Re: What did you do to your truck today.The 3rd chapter
Quote:
https://www.youtube.com/watch?v=6Ef4SlyvEnU&t=3687s |
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
Ripped out the old trailer brake box and 20' of wire.
Tore out the old cloth heater/AC hoses, most of which went nowhere anyway. I mangled the cardboard glove box liner, so debating whether to make one from sheet metal or just get another one. |
Re: What did you do to your truck today.The 3rd chapter
Quote:
If I was building one, I'd make it so the long part hinged in on itself and could open out once in place. The cardboard unit does this by bending the cardboard, but metal won't be as flexible. Think of it more as a Ship-In-a-Bottle, than as Box A goes into Slot B. Yeah. I pulled off an ancient Brake Controller box from my Jimmy the other day. Only used it once. I was back in there doing a root canal on my Parking Brake Cable. |
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
Gregski made a glovebox out of sheet metal recently.
http://67-72chevytrucks.com/vboard/s...826089&page=86 |
Re: What did you do to your truck today.The 3rd chapter
2 Attachment(s)
Got the truck bed coating done last night. I found out it doesn’t remove dents, LOL. But I prolonged the life of this 51 yo truck box. Next I got to get some volunteers to lift box off frame. I want to wire wheel, prep and paint the bottom of the box and the frame.
This truck is from Oklahoma, so it’s very solid for its age. I’m in Iowa, trucks don’t survive this long if driven in our elements. |
Re: What did you do to your truck today.The 3rd chapter
Drove the truck around the block today a couple times, got a few little bugs to work out. Biggest headscratcher is a odd misfire after driving. You can start it up and it will idle fine. Take off and drive, go a block or two and then come to stop and the truck is running ruff at idle. Shut truck off, let it sit for a couple minutes and then fire up and its running smooth again. So starting rest of the weekend will be going over the ignition and grounds.
|
Re: What did you do to your truck today.The 3rd chapter
2 Attachment(s)
Got the box off tonight. Started wiring wheeling the frame. Weather is supposed to be in the 50s tomorrow, so hopefully I can can a lot done on the bottom of the box. I’d like to get it wire wheeled, rust proofed and painted this weekend.
Then I can cover it with a tarp and get the frame completed. |
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
2 Attachment(s)
Wire wheeled the bottom side of the box. Way harder than the topside, all the supports in the way. Then took a piece of wood and pounded out the dents in the floor and wheel tubs. I didn’t get the dents out, but definitely made them smaller. Then applied the rust remover.
Tomorrow I’ll rinse it, dry it and brush on rust oleum paint. I’ll see if I can find some undercoat for the wheel tubs |
Re: What did you do to your truck today.The 3rd chapter
2 Attachment(s)
built a cart for my 67 cab. Had help from the neighbors and got cab loaded onto the cart. Now the fun begins.
|
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
Got my voltmeter hooked up, I used the guts from a cheap stand alone meter. 'Calibrated' it with a 22 ohm resistor in series, it reads pretty much 8-16 volts with 12 ish right I the middle. Pic is with ignition on. I'm happy with that
|
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
2 Attachment(s)
Left rust remover on over night. Cleaned it off and wiped it down with acetone. I put rust oleum rubberized undercoating on wheel wells. I brush painted the rest with rust oleum satin black. Looks way better and should keep this old truck box around for many years.
|
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
Wife and I went to a local cruise in. Another truck owner showed up, but in his really nice Camaro.
|
Re: What did you do to your truck today.The 3rd chapter
Drove up to East Texas Monday to my brother's shop. Pulling the fenders, so much fun! I'm installing the missing Hinge Pillar to Fender Seals and badging my Truck as Super (all the other Super bits have been done, including new SPID).
I should be done today and the truck back together. My brother pushed me to do the passenger's side first, as it has a bit more stuff to deal with around the fender area (battery, power bits, charcoal canister). I think he was right and the driver's side should be a snap (famous last works LOL). https://67-72chevytrucks.com/vboard/...1&d=1700592544 https://67-72chevytrucks.com/vboard/...1&d=1700594561 https://67-72chevytrucks.com/vboard/...1&d=1700600849 |
Re: What did you do to your truck today.The 3rd chapter
Happy birthday to me - ordered and received one of the new 16" Billet Muscle steering wheels from Forever Sharp. The 14" wheel just looks a little small to me installed - now waiting on the front adapter and horn assembly for it to post photos..
|
Re: What did you do to your truck today.The 3rd chapter
Hinge Pillar to Fender Seal & Super Badge install completed - so happy to have the truck back together. While it wasn't a quick job, it wasn't what I call a hard job. Though being in my brother's shop with a LOT of room and any tool that I could possibly need allowed for a near stress free time! Plus speeding time with my brother and his family made it a bit of fun ;-)
https://67-72chevytrucks.com/vboard/...1&d=1700703117 https://67-72chevytrucks.com/vboard/...1&d=1700703135 |
Re: What did you do to your truck today.The 3rd chapter
Hinge Pillar to Fender Seal & Super Badge install completed - so happy to have the truck back together. While it wasn't a quick job, it wasn't what I call a hard job. Though being in my brother's shop with a LOT of room and any tool that I could possibly need allow a near stress free time! Plus speeding time with my brother and his family made it a bit of fun ;-)
https://67-72chevytrucks.com/vboard/...1&d=1700703117 https://67-72chevytrucks.com/vboard/...1&d=1700703135 |
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
Got the U bolts cut off, got the trailing arms out, got the track bar out, working on getting the upper spring brackets unbolted.
Have new bushings for trailing arms and a new track bar. |
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
Made a custom aluminum panel for the Dakota Digital AC controller for my dash using the stock temperature controller.
I tried to find a stock used controller before I cut up my brand new one, but...no dice. So, I cut up my new stock temperature controller to make this panel which has a power switch on each side. One for the electric fan bypass, and one for the 2-step. |
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
4 Attachment(s)
Wire wheeled, rust proofed, wiped down with acetone, and brushed with rust oleum satin black. Have to clean and paint 12 bolt, put new bushings in trailing arms, and wait for new springs.
|
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
Finished my climate hoses. It wasn't an entirely linear process ;-)
Need a new defroster lever, wiper switch, glovebox liner, and a speaker before I can button it back up. ;-) Looks like that new guy was pretty excited with the seam sealer gun. Here we see stalactites! |
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
Wire brushed and painted the rear end. Now just waiting on parts to re assembly everything
|
Re: What did you do to your truck today.The 3rd chapter
2 Attachment(s)
New dash pad. For once, I timed this right, because it's a ton easier with the instrument cluster and glovebox out. Previous guy didn't even put nuts on those middle 3 bolts.
Included a pic of the QA tag from the previous pad. Probably not original, but it did have the steel shell inside the foam |
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
You're doing a great job. It's looking great!
|
Re: What did you do to your truck today.The 3rd chapter
Took a few minutes and fixed my horn that stop functioning, front driver parking light and front driver side marker light. Loose wire, unplugged connector and burned out bulb, in that order.
|
Re: What did you do to your truck today.The 3rd chapter
Over the weekend finally took the truck out onto the highway with the new motor and 5 speed. Ran perfect and man I should have done the tremec when I initially built the truck. What a difference.
|
Re: What did you do to your truck today.The 3rd chapter
I really need to invest in an air hammer. Spent the weekend grinding and punching out rivets on the frame cross members that I don't need anymore.
|
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
Made a few more baby steps with the exhaust on my ‘70. Waiting for another straight (4’) and pie cuts to show up so I can tackle the passenger side tailpipe.
|
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
All times are GMT -4. The time now is 04:41 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com