The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   projects and builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=197)
-   -   Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO! (https://67-72chevytrucks.com/vboard/showthread.php?t=585901)

Grizz1963 06-12-2020 04:11 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Looking for advice again.


Continuing on this path the carport construction enlightenment I thought it worthwhile asking about using some Aluminium scaffolding
https://i294.photobucket.com/albums/...sdhl6hz0n.jpeg

I was thinking a tapered structure, or flat structure, but mounted on a slope.

https://i294.photobucket.com/albums/...sxpjqrm1v.jpeg

Covered in industrial profile sheet metal roofing materials.

https://i294.photobucket.com/albums/...slxadxjqs.jpeg

Once again, I like the idea of lightweight construction and also premanufactured Layher Alloy Lattice beam supports.

Any scaffolders on here know more ?

Grizz1963 06-21-2020 04:48 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
No photos as Photobucket messing around last 12 days and they do not reply to their Helpdesk.

But.....

First Covid-19 Boot-fair of the year.

Rain was forecast, soon;y 1/3 of field filled.

Still got lucky.

Needed a multi plug adapter to repair/replace one I drove over years ago......

£1.00 each or take the lot for £5.00 so I got 9 units.

Also bought 14 GU10 lightbulbs for £5.00

And a very nice garden rake for £2.00

Came home, had breakfast, now headed out to garage to mix some cement in @Johnnybravo ‘s mixer to lay some more high density blocks in the ‘compressor room” that my interfering friend @PaulY suggested I build Next to the woodwork shed while relocating the wall on the drive. Those blocks are heavy for sure.....

Good idea Paul.

.

Grizz1963 06-25-2020 03:06 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Taken two days off work.

Photophukit is “Back online” but now I need to figure how to actually upload and use it on iPad and App.

Grrrrrrr...../

Galaxy has been working, carrying loads of builder rubble unearthed while digging and moving soil in the garden.

Also ran a quick errand for @Johnnybravo whom I hope to make a cuppa for today, if he is not racing around, as he usually has to do when doing an extended pickup trip.

Carport and extended drive work continues.

Measured last night, and have gained 500mm of driveway space, door to wall is now 6.3 meter max, so should fit many American cars or big stuff.

Chainsaw next, to remove the tree stump that started it all.

Later.

Grizz1963 06-26-2020 04:30 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
This is a test.

The “new Photophukit” is not yet imbedded in my phone or iPad.

Lets see if this actually works.

Pic uplosded

Img tag lifted.

Mickey brought around some cherries from his tree


https://hosting.photobucket.com/imag..._IMG_0944.HEIC


In the mean time the heat and layong 19kg blocks along with some other yard jobs yesterday certainly kicked my butt.

More to come.

Hopefully.

Grizz1963 06-28-2020 07:01 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Uploaded some photos. About 22.

Need to find time to sit, relax.... try use links and do a write up.

I have been busy and busy.

Bootfairs were one good, one a bust today.

Grizz1963 06-28-2020 08:42 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Right.

New Photobucket, may be better, may not.

Possibly two weeks behind on pics, due to website relaunch.


Thought I would just post up some pics of Dennis’s world.

Firstly, Archer......

Puppy still cute, and follows Dennis everywhere.

Smooth criminal.

https://hosting.photobucket.com/imag...080&fit=bounds

Wing and full,set of stabilisers now fitted.

https://hosting.photobucket.com/imag...080&fit=bounds

Biggest problem will be not being able to sit on the tailgate, drinking beer and watching stuff happen at car shows or burnout competitions

https://hosting.photobucket.com/imag...080&fit=bounds

Big problem with doing this body swap of 1966 onto 2015

Getting stuff like the steering fitted through the bulkhead.

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

Starting to look like a nasty race truck.

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

Guard dog or chain gang?

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

Front end waiting to be refitted.

https://hosting.photobucket.com/imag...080&fit=bounds

Space.

https://hosting.photobucket.com/imag...080&fit=bounds

More and more new panels seem to have found their way onto the 66.

https://hosting.photobucket.com/imag...080&fit=bounds

Business end.

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

Stepping back

https://hosting.photobucket.com/imag...080&fit=bounds

And to close this post off.

Next generation.....

Grandson, drawn to all things mechanical.

https://hosting.photobucket.com/imag...080&fit=bounds

More later.

.

realvc 06-28-2020 03:29 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
I reply on here sometimes and on your GJ thread sometimes.
Today I'll reply on both.
Cool truck build:chevy:

Indian113 06-29-2020 07:33 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Wow! What a Truck

Grizz1963 06-30-2020 04:16 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Quote:

Originally Posted by realvc (Post 8765454)
I reply on here sometimes and on your GJ thread sometimes.
Today I'll reply on both.
Cool truck build:chevy:

Certainly is an amazing build Vince.

I see you moving around.

Quote:

Originally Posted by Indian113 (Post 8765789)
Wow! What a Truck

Unassuming like Dennis.

I think it’s sad so few people see it or know about it.


Still trying to come to grips with the new Photobucket layout.

Not impressed

Have to use an app to pull the links.

Website seems to suck.

https://hosting.photobucket.com/imag..._IMG_0480.HEIC

Prozac made a return to the valley, sans NASCAR stickers

Sally took the pic.

https://hosting.photobucket.com/imag...dedb6ebf33.jpg

Also on FB was a reminder that a year ago we were watching races in the Blazer.

https://hosting.photobucket.com/imag...6_IMG_0500.JPG

So, back to the restructure down at the garage.

Started by lifting the paving.

https://hosting.photobucket.com/imag...f4cdc50411.jpg

Helped of course.

https://hosting.photobucket.com/imag..._IMG_0431.HEIC

Also got to prep for the first post by digging a 25 inch deep hole.

And making up the positioning board for the threaded studs

https://hosting.photobucket.com/imag...f2234bb113.jpg

https://hosting.photobucket.com/imag...d2c8405e43.jpg

https://hosting.photobucket.com/imag..._IMG_0461.HEIC

https://hosting.photobucket.com/imag..._IMG_0470.HEIC

Poured

https://hosting.photobucket.com/imag..._IMG_0472.HEIC

https://hosting.photobucket.com/imag...7e48bd1386.jpg

Made a small box to keep the paving and sand clear from the post mount until the post is shortened and ready.

https://hosting.photobucket.com/imag..._IMG_0517.HEIC

Once that was done, I decided to build a single level wall to help keep the hedge under control in the long term.

https://hosting.photobucket.com/imag...2b78ea0add.jpg

Blocks are 19kg each.

https://hosting.photobucket.com/imag...92fa36ceb0.jpg

New lodger is a welder, but likes a beer and to do some physical work after work.

Suits me.

So wall done.

https://hosting.photobucket.com/imag..._IMG_0526.HEIC

I also decided to add little drains between every alternative block, in case the rain ever was a problem.

And a thick wedge of cement from behind to stop anything from unseating the blocks.

https://hosting.photobucket.com/imag..._IMG_0527.HEIC

Once the concrete had gone off, I waited 24 hrs and then used PaulF’s compactor to do a final setting of the paving stones/

https://hosting.photobucket.com/imag..._IMG_0608.HEIC

https://hosting.photobucket.com/imag..._IMG_0572.HEIC

https://hosting.photobucket.com/imag..._IMG_0609.HEIC


‘So after this I could start on the next job.....

This wall has a few cracks, so needed rebuilding and moving to improve overall usability

https://hosting.photobucket.com/imag...12E0EA4(1).jpg

‘Red wall” also needed to go and be moved.

https://hosting.photobucket.com/imag...1339788B9C.jpg

So made a start, removing loads of soil from behind the wall.

https://hosting.photobucket.com/imag...09FE48B60C.jpg

I moved 11 loads over the street to where trucks had greatest deep trench that the council will never repair, but where people like to par,.

And after all of that, Andy bought me a beer.

https://hosting.photobucket.com/imag..._IMG_0521.HEIC


Later.

Grizz1963 07-01-2020 06:14 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
This guy lived down my chimney for three days before I managed to catch him

Created a huge soot storm in the lounge.

https://hosting.photobucket.com/imag...080&fit=bounds

Went to my favourite scrap metal merchants to look for some decent steel to use in making up some wall plates for the carport.

Failed, but managed to buy a really nice Muddy Fox mountain bike for the lodger for £5.00

https://hosting.photobucket.com/imag...080&fit=bounds

Back home I started to pull down walls and dig out soil as @PaulY had suggested I create a compressor room next to the woodwork shed.

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

Taking down the brick and block work, and being as tight as I am, I cleaned the blocks and stacked them for future reuse.

https://hosting.photobucket.com/imag...080&fit=bounds
When unfit, it seems a bigger job than it is.

https://hosting.photobucket.com/imag...080&fit=bounds

Archeological finds

https://hosting.photobucket.com/imag...080&fit=bounds

Prepared for concreting and boxiing in.

https://hosting.photobucket.com/imag...080&fit=bounds

Thanks to @JohnnyBravo for the mixer

https://hosting.photobucket.com/imag...080&fit=bounds
https://hosting.photobucket.com/imag...080&fit=bounds

The Galaxy once again proved itself more than capable in the shifting stuff department.

I took 5 loads of rubble up to the farm to dump on their road building rubble pile. Exactly 1km, certainly beats the 16km or 10 miles to my local council tip.
https://hosting.photobucket.com/imag...080&fit=bounds

.

Palf70Step 07-01-2020 07:40 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
I hear ya about the digging part Rian. Been so long since I had to regularly dig ditches for cable installations. I remember my techniques, but I do think the age interfers with the good digging technique. Must say I don't normally feel bad until I stop, then it all catches up with me, WAY to fast.

aggie91 07-02-2020 02:14 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
I agree with Bill, while doing the work its not so bad. Its at the end of the day and the next morning that you remember why you don't work as hard has you did in your 20's or 30's or even 40's.

I get a kick out of Rian's shoes. Digging with flip flops, but mixing and placing concrete in socks and tennis shoes...

Grizz1963 07-02-2020 05:06 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Quote:

Originally Posted by Palf70Step (Post 8767379)
I hear ya about the digging part Rian. Been so long since I had to regularly dig ditches for cable installations. I remember my techniques, but I do think the age interfers with the good digging technique. Must say I don't normally feel bad until I stop, then it all catches up with me, WAY to fast.

Certainly catches up with me Bill.

Grizz1963 07-02-2020 05:08 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Quote:

Originally Posted by aggie91 (Post 8767797)
I agree with Bill, while doing the work its not so bad. Its at the end of the day and the next morning that you remember why you don't work as hard has you did in your 20's or 30's or even 40's.

I get a kick out of Rian's shoes. Digging with flip flops, but mixing and placing concrete in socks and tennis shoes...

Sorry Karl,

It is my lodger who wears the socks and trainers.

I am still in the flip flops

Indian113 07-02-2020 05:58 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Quote:

Originally Posted by Grizz1963 (Post 8767883)
Sorry Karl,

It is my lodger who wears the socks and trainers.

I am still in the flip flops

But they are Safety Approved! :lol:

Grizz1963 07-04-2020 04:35 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Quote:

Originally Posted by Indian113 (Post 8767914)
But they are Safety Approved! :lol:

Of course.

Grizz1963 07-04-2020 04:36 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
And this is said treasure pile up at the farm.

Someone dumped two full, unused pallets of grey paving stones there a year or so ago.

The farm mixes all the rubble from time to time, but those with slight of hand skills can still score a few stones.....

Get my drift?

https://hosting.photobucket.com/imag...080&fit=bounds

Speaking of....

I ultimately took 11 large wheelbarrow loads of paving cutoff and soil over the road to put in a trench a twin axle truck put there in winter, meaning nobody could park there safely, except for 4x4’s

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds


@PaulY also offered to put a door on his Annexe as it was his bright idea to put the compressor outside.

Thanks mate, sure I can make it fit once I build and fit a crooked doorframe.

https://hosting.photobucket.com/imag...080&fit=bounds

And the bootfair fig tree I bought three years ago, has 16 figs this year

https://hosting.photobucket.com/imag...080&fit=bounds

In other news from the USA, Dennis’s new dog Archer had his first haircut, looks like a dog now.

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

Back to making more car space.

This was an interesting build, no plans, no levels, no straight lines and nature to contend with (I respected the plants first and built around them)

So a few curves where I avoided damaging the main roots of shrubs and trees.

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

Also carried on digging out all the rubble that had been deposited behind the wall by the paving contractor.

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

Also cleaned up every block I took down with bolster and lump hammer.

Crazy, but saving about £60.00 in recycling between Zoom nd Teams meetings and doing admin indoors was quite therapeutic too.

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

Andy, my new lodger loves working up a sweat too, and loved putting the 20 pound hammer to the wall, bringing it down bit by bit.

Really useful finding a good lodger.

https://hosting.photobucket.com/imag...080&fit=bounds





So once the clearing was done, I could start to lay the blocks on the new line I had planned.

Pushing back the grey wall to where the red wall was before and joining PauY’s Annexe wall.

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

One of the biggest problems is actually getting the curve to look half decent.

So some recycled blocks were already halved, but the new, tighter curve meant some needed further cutting.

Always glad that I buy certain rare use tools, so much easier going into the back of the garage and digging them out.

Grinder, diamond blade, action.

Build

https://hosting.photobucket.com/imag...080&fit=bounds

Walls headed in the right direction

Also made some vents for the compressor room from the same fire wood and added them in.

They will get cat proof mesh from an old freezer later.

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds
Gained 500mm to make the space between garage door and wall 6.3 meters.

This is only for a small section as there will be a solid galvanised post about 40mm to the right of PaulY’s Annexe wall corner that will be on the drive.

Still, very pleased that so much work has resulted in so little gain

https://hosting.photobucket.com/imag...080&fit=bounds

A while ago Sally and I went over to Kevin and Teresa’s in Maidstone for a fully distanced garden patio lunch, and I saw that he had thrown out for recycling, a pair of bulkhead lights.

Guess where they are now.

https://hosting.photobucket.com/imag...080&fit=bounds

Used some white oak skirting boards from the fire wood pile to make recess boxes to add into the wall later.

https://hosting.photobucket.com/imag...080&fit=bounds

Bitumen all sides to protect the wood.

https://hosting.photobucket.com/imag...080&fit=bounds

Poor Sally was not having much company here with me using all the bits of time I could find inbetween work an various other things, so she went for long walks with her new graduate lodger, to show him the area.

Sharing a bit with me.

She wins

https://hosting.photobucket.com/imag...080&fit=bounds

Long days and lonely nights.....

https://hosting.photobucket.com/imag...080&fit=bounds

Grizz1963 07-04-2020 05:42 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Another quick early morning job before showering and starting the days Zoom meetings etc.

Mixed fine kiln dried sand and cement in a crazy strong ratio and painted the wall to seal the pores for paint later, just to make the room lighter.

https://hosting.photobucket.com/imag...080&fit=bounds

Also found while breaking down more of the wall, just how deep I had planted the tree that caused a lot of this, so unearthed more of it and fetched the chainsaw out, again early morning at -8.05 so neighbours could just shut up.

https://hosting.photobucket.com/imag...080&fit=bounds

Cut.

Drilled a bunch of holes in It and filled them with pure Roundup, that should sort it.

https://hosting.photobucket.com/imag...080&fit=bounds

Took two days leave along with Sally when it was so very hot, spent them not with her..... oooopps.

But Mickey had a lead on some storage units being emptied of the scrap left in there.

Galaxy, gloves, trailer, CHECK !

https://hosting.photobucket.com/imag...080&fit=bounds

Got some industrial shelving to go in the carport.

These are not cheap.

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

About 45 litres of white paint, 5 litres of PVA glue, 2.5 litres of indoor satin varnish, some tools, including a new pick axe and various other bits.

Next day we went back to fetch a load of plastic decking flooring, and a new sheet of ply, a load of plastic storage boxes and various other free treasures.

Mickey had been in there days before me and found three Dewalt power skill saws, random hand tools, drills, and some chargers plus a load of scrap copper that he weighed in along with aluminium for about £70.00

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

Happy guy.

https://hosting.photobucket.com/imag...080&fit=bounds

While out a few weeks ago in the Galaxy, I clocked a jumbo bag on a sidewalk where paving had been redone.

On one of our return trips from the storage units with Mickey, we detoured along the country lane it was on, and I stopped to see what was in it......

JACKPOT....!

I went to knock on the front door, but nobody answered, so we drove off.

Next day I was dressed a bit neater and went back to knock again and asked if I could remove some contents.

Yes, no problem, the bag is getting collected later today.

Lucky me.

So, I hear you ask, what was in this skip bag?

Remember that with moving the wall on that curve, I now needed more paving stones to cover the area, and add to that the fact that the curve has a load of cut bricks, and you have a significant deficit.

I had been looking for matching block paving, as I had originally selected a mixed colour, rather than red and grey as many people do.

The stones in this bag are also thicker than what I have on my drive, possibly a commercial grade.

So when I lift a large section of the paving to repair the sinking in caused by American cars and trucks reversing up and down the drive in from]not of the garage, the new heavy duty -avers will go in there, and the under ones go into the new, low traffic sections.

Adding up the value of the pavement find, again I came up to a conservative value of £50.00 found for free.

Would you pick up £50.00 off the pavement?/

Sure you would.

https://hosting.photobucket.com/imag...080&fit=bounds

Amazingly, 100 exactly, dug from the bag and a load of 3/4 cut ones too, just in case I need them.

https://hosting.photobucket.com/imag...080&fit=bounds

Pressure cleaned one of them to see how they clean up.

Happy.

https://hosting.photobucket.com/imag...080&fit=bounds


Free cash means money in the kitty for other frivolous pursuits like a Toyota Deliboy.


https://forum.retro-rides.org/thread...toyota-deliboy

I like it a lot, despite 270 miles to go look.

.

Grizz1963 07-05-2020 04:01 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Seems bootfairs are a bust so far this year.

Loads of Pink Sh!t as @JohnnyBravo would say.

Not much technical or bargainous

Today was no change.

New Coca Cola rugby ball for CraigRK and his collection £1.00
12 skull bottles £1.00
Used Real bristle brush 50P
Spanner to use as door hand;e on compressor room £1.00
Name plate 50p

https://hosting.photobucket.com/imag...080&fit=bounds

Contemplating not going to bootfairs anymore, but suspect it’s an addiction.......

Grizz1963 07-08-2020 07:32 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Remember the Deliboy?


Seller has only had it three months and is selling it on again, makes me a bit inquisitive as to why this thing keeps changing hands.....


he sent me these pics of his current build which certainly resembles the Deliboy in basic profile.

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

Grizz1963 07-08-2020 08:36 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
So the COVID Crisis continues.

Meaning I get to work from home for the foreseeable future, which is less fun than you may think, but at least I am employed.

Inbetween meetings etc, I did manage to bake batch no 2 of South African style rusks, the first ones were muesli and really good.

This time I did fruit and aniseed with a bit of muesli tossed in for luck.

https://hosting.photobucket.com/imag...080&fit=bounds

Once baked, you let them cool down as a loaf, then cut into strips or blocks and dry at 70-90’C for 4-5 hrs and pack away in tins or plastic storage.

Great alternative to breakfast, snacking or with coffee.

Oh, and not everybody’s thing.

https://hosting.photobucket.com/imag...080&fit=bounds

Also got a great parcel from Dikkehemaworst in Amsterdam.

Awesome contents.

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

And the building went on, sometimes a few blocks at 07.00am or after dinner.

Amazing how a lump hammer can level things out.

https://hosting.photobucket.com/imag...080&fit=bounds

Bulkhead light boxes went in.

Power will be from the woodwork shed that has its own independent supply

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

Previously wall was 4 courses high

https://hosting.photobucket.com/imag...080&fit=bounds

Decided to go 5 high as the plants do tend to take over.

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

Mickey came around to paint the boxes wit some weird pool and pond paint while his brush was wet as he was rebuilding the floor of his fishpond

https://hosting.photobucket.com/imag...080&fit=bounds

Once the wall was at full height, I cut a load of wood, white oak, that I had originally planned to use for theChevy C10’s rear bed floor up and screwed it all down on a frame, to be felted once completed.

One strip left to add.

https://hosting.photobucket.com/imag...080&fit=bounds


Mickey straight up on top as he weighs about as much as a packet of Doritos.

Adding a small facia on the garden side to close it all in a bit more to keep birds from nesting in there.

https://hosting.photobucket.com/imag...080&fit=bounds


https://hosting.photobucket.com/imag...080&fit=bounds


Once Mickey went home for dinner, I carried on and felted the roof, plus added an end strip to it all.


https://hosting.photobucket.com/imag...080&fit=bounds

Have to say, it has become a bigger job than planned, but I am pretty pleased with all the added bits.

It should work well in the long term.

.

Palf70Step 07-08-2020 09:29 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Nice work Rian.

Grizz1963 07-08-2020 09:51 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Quote:

Originally Posted by Palf70Step (Post 8770759)
Nice work Rian.

Thanks Bill.

Just got to keep chipping away when I get time


The following post is bad use there are quite a lot of UK guys on here as well, so just copied and pasting.


Random FB Marketplace score.

A lady who works at a postal sorting depot about 15 miles from me, posted up plastic storage boxes going free of charge.

I replied that I was interested, as I am going to need some boxes or trays for the new carport in which to store stuff.

So this morning early (She starts work at 05.30) I drove over to collect some.

https://hosting.photobucket.com/imag...080&fit=bounds

There are loads available, some are knackered, and not right for me, but you can pick through them.

They will certainly not be everyone’s cuppa tea, being corrugated plastic, but for me they will work.

Sizes are 300x600 and 300x450 as original sizes, and they are slightly funnel shaped.

I did not take any of the small ones, but they may work for some.

https://hosting.photobucket.com/imag...080&fit=bounds

Let me know by PM if you are near Maidstone or Rochester and want some, and I will see what I can arrange for you regarding access and collection.

realvc 07-08-2020 10:08 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
You have a guy building what looks like a postal truck and you are picking up postal crates. There seems to be a postal theme going on here:lol:

Palf70Step 07-08-2020 12:05 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
:agree: :lol:

Grizz1963 07-09-2020 05:05 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Quote:

Originally Posted by realvc (Post 8770777)
You have a guy building what looks like a postal truck and you are picking up postal crates. There seems to be a postal theme going on here:lol:

I offered him some, he agreed they may look cool somewhere in there.

I doubt he would,though.

Quote:

Originally Posted by Palf70Step (Post 8770846)
:agree: :lol:

Still, if he wants some, he is welcome.



Well, sometimes it pays to be kind.

I don’t do it for any other reason, than it not affecting me, if one or two or three people eat dinner.

So my new welder lodger has settled in well, he and Sally get on well, take the pee with me etc.

I cook most nights as I work from home with Covid-19 and Sally who gets up at 4.15 for work, eats here, so when Andy moved in three weeks ago, it was no skin off my nose to offer him dinner when we eat, he likes spicy food, we doo, so no wasted food as shops often pack and sell in odd numbers as they know it forces double up buying so you can get an even number of portions, vegetables are cheap too.....
Tossing laundry in the machine works the same way even though these things are not included in the lodging cost, makes no difference to me.

Anyway, this weekend he went home to see his wife and son and also his parents.

Monday night he came in from work bearing gifts, these were stashed in his dads garage from various previous contracts over the years where he gets issued with new tools per contract, that then never get used as the ones he has in use are perfectly fine. So he just stashes the spares or used ones and at the end of contract stuff gets skipped.

In fact, when he moved in here as contract manager and backup welder to the current contract a week before it started, he borrowed two 1/2 inch drives and a few sockets from me as there was stuff to be done but no tools on site, again, not really a problem when stuff comes back.

So now I have a brand new 1.0 meter breaker bar (was needed when I tore down the C10 and Blazer) and a 38mm socket plus some files and a small square (mine was stolen a long time ago)

Chuffed.

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

Karma?

https://hosting.photobucket.com/imag...080&fit=bounds
https://hosting.photobucket.com/imag...080&fit=bounds


And another random happening from this week.

I do love it when people pop in unannounced when I am at home, this working from home thing sucks and is a bit lonely at times.

So the doorbell rings and it is Charlie, the local farmer who historically used to call me to see if I or Nicola my ex wanted to go drive the combine harvester in the back field when harvesting (thing drives itself really)

“Got time to boil the kettle?”

So a quick coffee and a risk and he is off to fill up his tractor and get back to work.

When your company car does not fit on the drive.....

https://hosting.photobucket.com/imag...080&fit=bounds



More later.

Palf70Step 07-09-2020 06:50 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
That is a hair taller than my John Deere. :lol:

Grizz1963 07-09-2020 01:41 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Quote:

Originally Posted by Palf70Step (Post 8771230)
That is a hair taller than my John Deere. :lol:

It is on tall wheels too.




So once the wall and roof to @PaulY ‘s annexe was complete, the next step was to paint the inside

https://hosting.photobucket.com/imag...080&fit=bounds

Followed by shelves cut from some recycled skirting boards and old freezer baskets.

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag..._IMG_1560.HEIC

Then cement paint all the blocks to get the pores filled and it all looking uniform

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

Colour match the shelf supports, brown to the left, white on the right.

https://hosting.photobucket.com/imag...080&fit=bounds

Once the cement had dried, follow up with white paint, thanks to the clearing out Mickey took me along for.

https://hosting.photobucket.com/imag...080&fit=bounds

Resulting in a very bright white wall.

https://hosting.photobucket.com/imag...080&fit=bounds

More jobs to do of course, but they all need to fit inbetween the day job tasks.

Or mostly, after work.

Palf70Step 07-09-2020 02:21 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Looks good Rian!

aggie91 07-10-2020 10:44 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
New wall looks great! Not to call you out on anything, but go back and look at post #4410, there is a picture of a guy that looks like you with the mixer, that guy is wearing socks and shoes...lol... That was what I was talking about on my last post. I don't think I have seen you work (yard/house work) in anything but flip flops...

I started in again on getting my '65 back on the road. I have started putting the next engine together and getting misc. wiring done now that I have my second bathroom functional!

Grizz1963 07-10-2020 03:01 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Quote:

Originally Posted by realvc (Post 8770777)
You have a guy building what looks like a postal truck and you are picking up postal crates. There seems to be a postal theme going on here:lol:

Quote:

Originally Posted by Palf70Step (Post 8770846)
:agree: :lol:

Thanks Bill

Grizz1963 07-10-2020 03:04 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Quote:

Originally Posted by aggie91 (Post 8771953)
New wall looks great! Not to call you out on anything, but go back and look at post #4410, there is a picture of a guy that looks like you with the mixer, that guy is wearing socks and shoes...lol... That was what I was talking about on my last post. I don't think I have seen you work (yard/house work) in anything but flip flops...

I started in again on getting my '65 back on the road. I have started putting the next engine together and getting misc. wiring done now that I have my second bathroom functional!

Hey Karl !!

Well spotted.

I had to really gp back and do a forensic reconstruction here.

It was on the 20th June.

I had the big grinder out to cut the block wall.

Not much good but made me feel safer.

Good spot though.

Grizz1963 07-10-2020 05:32 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Some lunch time digging, next post foundation.

1000x1000x1000mm Concrete


https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

Then mixing and casting concrete.

Amazing how much concrete goes into a cubic meter.

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

Of course Andy the lodger enjoys this whole process too.

https://hosting.photobucket.com/imag...080&fit=bounds

And cast and done.

https://hosting.photobucket.com/imag...080&fit=bounds

Rain followed play too.

Palf70Step 07-10-2020 05:32 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
I keep wondering if I should go back to steel toed shoes when I am in the shop, but if the tenny runners work for Rian, than I am safe. ;)

Grizz1963 07-11-2020 05:17 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Quote:

Originally Posted by Palf70Step (Post 8772258)
I keep wondering if I should go back to steel toed shoes when I am in the shop, but if the tenny runners work for Rian, than I am safe. ;)

Bill, its all relative, for some jobs, I do wear real steel cap boots or trainer shoes, but most is a risk assessment and get on with the job.


Well, it is Saturday morning.

Slow start.

Honeysuckle is gathering speed, growing up the big pine tree.

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

In Siberia life goes on, some random pics from Stas.

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

Greetings from the man.

https://hosting.photobucket.com/imag...080&fit=bounds

Katya had her 35th birthday recently.

Still the best looking honorary member on here.

https://hosting.photobucket.com/imag...080&fit=bounds

In the mean time, Covid-19 is screwing up their lives too.

This week I also cut two freezer baskets down and created some bird proofing fo ether vent holes.

Plus adding some of the discarded USPS boxes on the shelves.

https://hosting.photobucket.com/imag...080&fit=bounds


Plus removing the spacer board for the post mounting points.

https://hosting.photobucket.com/imag...080&fit=bounds

Cleaned up.

https://hosting.photobucket.com/imag...080&fit=bounds

And ready to be paved around until the posts are cut down to the right height and welded back together by pro welder Andy with his special machine.

https://hosting.photobucket.com/imag...080&fit=bounds

Had some rain this week, and even half an hour after it stopped, two long puddles show that the paving needs lifting up, and re-laying to get it all level.

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

All of the highlighted paving must be lifted, relaid and also new added where there was none before.

One of today’s jobs.

https://hosting.photobucket.com/imag...080&fit=bounds

Mate Fil from Cambridge came down yesterday to collect and drop off stuff.

He also collected a load of the postal boxes to be redistributed nationally to those needing some storage solutions.

More in there than it seems.

https://hosting.photobucket.com/imag...080&fit=bounds

Score of the day on FB Marketplace to be collected after 3.00pm.

£10.00 each, lodger Andy can do a full industrial weld on them to create a useable length.

https://hosting.photobucket.com/imag...080&fit=bounds

Total length will work on structure.

https://hosting.photobucket.com/imag...080&fit=bounds

And lastly, same sunset, 40 minutes apart.

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

Later.


.


.

Grizz1963 07-12-2020 04:28 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Sunset last night.....

I was still contemplating giving the bootfairs a miss after the last few weeks.

https://hosting.photobucket.com/imag...080&fit=bounds

Woke at 04.00 and dozed till 05.40 then got up, made Sally a coffee as she stayed over after dinner and a glass of wine......

Then headed out by 06.10

First blood went to Craig who is away camping with the family at the coast.

£3.00 and the seller would not budge.

Seems it is a bit rare, I certainly never saw one before.

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

Next up was this, like new, balance bike for Sally’s grandson.

At £2.00 it has to be a bit of a bargain.

https://hosting.photobucket.com/imag...080&fit=bounds

My last purchase, a vintage Red bulkhead light was a bit of a bargain at 50p

Really like it.

https://hosting.photobucket.com/imag...080&fit=bounds

Then some rubber and fabric gloves at 50p/pair.

Got 12 pairs for £5.00

And my winner for the day.

A guy selling everything in lots of £1.00 per item......

A plastic box with 12 nylon trolley castor wheels..... half of them braked, half fee running, and also in the box an air driven drill chuck with chuck key, perfect for tungsten carbide tipped bits to use when filing down welds or reaming holes.


https://hosting.photobucket.com/imag...080&fit=bounds

So after wanting to walk away from bootfairs, they redeemed themselves again today.

Now back to block paving.

Grizz1963 07-12-2020 08:46 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Thought I would check the price of the little balance bike.

Ouch !!

https://hosting.photobucket.com/imag...72C85D3D12.jpg

Grizz1963 07-13-2020 02:41 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Mirror on Freecycle today.......


Guess her cleaner is coming after Covid restrictionists release us.


Look at the background.


https://hosting.photobucket.com/imag...4_IMG_1814.JPG

Grizz1963 07-13-2020 03:42 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Quicky before work starts in earnest.

Saturday.

No going back.

https://hosting.photobucket.com/imag...080&fit=bounds

Prep

Added two wheelbarrow loads of sand to exposed areas to get levels back to where I wanted them.

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

Starting with the easy part.....

Border.

https://hosting.photobucket.com/imag...080&fit=bounds

That was it.

I needed to spend time with Sally who never complains.

Sunday update later.

.

The Rocknrod 07-13-2020 08:07 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Nice work.
Is that clump of trees and dirt behind the white wall there to hide the house from the shop?


All times are GMT -4. The time now is 06:03 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com