![]() |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Quote:
That sounds really bad man. My. Dad taught us to use a sharp knife to scrape the stingers off, because if you tried to grab the poison pouch left behind, you automatically injected more venom. Bastards for sure. I am still laughing, despite the pain nd itch. My lymph nodes under my left armpit are so swollen I can fill my hand. Need to get the shed door closed and then plot my revenge. It may have to be done under cover of darkness, and using some unpleasant chemical agent. As the log is on the ground, and against the shed, under the bush. Entrance approximately where the arrow shows. A bit more to the left and lower though. Not spending £60.00 for a pest service may still led to regrets and a second casualty visit. https://hosting.photobucket.com/imag...8_IMG_3568.jpg |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Amazing how the itch continues, despite antihistamines, guess it will be worse, without. My armpit and right groin lymph nodes continue to be swollen, obviously something to do with the histamine reaction from the toxins.
Sally found me some ant powder at Sainsbury’s after Morrison’s had none yesterday. So a cautious approach at exposing the nest after dark, and hopefully a quiet end to all this. https://hosting.photobucket.com/imag...472bc8bb16.JPG |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
I feel for you Rian. My Dad is severely allergic to Yellow Wasps. He is very diligent to be aware of those things around the farm.
Hope you get to feeling better soon. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Quote:
Funny how the toxin poisons you, and your body’s reaction is what makes you feel bad. So I was too knackered, and actually uncomfortable at 11.00pm last night to go get dressed in triple layers in order to cut back the bush where the nest entrance is, approximately. So today I decided to do a modern warfare version of wasp control/extermination in stead. I used faithful old Ducktape and a 5 meter off cut of decking from last year, and then tossed the whole bottle around about where I think the entrance log was. Let’s hope is works. https://hosting.photobucket.com/imag..._IMG_3619.HEIC Mate Kevin also offered me some 3 ,meter wasp foam spray, which may become plan B if I missed the entrance and resultant kill altogether. https://hosting.photobucket.com/imag...45c52d6875.JPG Here’s to peace in the garden. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Or you could wait until dark and walk right up and do your business, that way you'll get most all of them.
|
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Quote:
Been told be a bee guy that the ideal is to poison them in daytime so the workers maximise getting poison into the hive. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Anyone remember the guy (Robert) taking a London Taxi chassis from the scrapyard to build a twin motored car?
LINK: https://forum.retro-rides.org/thread...rd-engineering Well, that is done....... Pics below. However, he has picked up and started on this LINK: https://forum.retro-rides.org/thread/215234/temptress Should be good too. Just a few pics to show what he ended up building on the London Cab chassis. https://hosting.photobucket.com/imag...E_IMG_0997.JPG https://hosting.photobucket.com/imag...B_IMG_0998.JPG Other side. Hand spun trumpets. https://hosting.photobucket.com/imag...3_IMG_0999.JPG Currently working on a small, lightweight bikini type roof for when it really gets wet. https://hosting.photobucket.com/imag...E_IMG_1001.JPG Not bad for a home build, using whatever was laying around. New build should be very interesting. . |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Went out tonight.
I went out at 10.00pm in four layers, T-shirt, two hoodies and a fireproof overall, safety boots, leather welding gloves and safety glasses and a fireproof hood over it all. Cut a bit of the bush away. They sounded like a gang of chainsaws. I foxxed right off and shut off lights and closed the workshop. Then walked back to house. These 7 still hitched a ride inside the clothes despite me shaking and brushing myself off while still in all the layers. One got me on the belly under the four layers and the rest got poison or the glove. Bastards are pissed now. Be interesting to see if they let me out the house in the morning. Sally helped a lot with screaming and pointing in panic. https://hosting.photobucket.com/imag..._IMG_3914.HEIC One scar. One pill. Antihistamine Another later before bedtime. Interesting thing, it seems the other stings have started to sympathy itch too. https://hosting.photobucket.com/imag...8_IMG_3916.jpg Bootfair in the morning if it’s not rained out. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
still need to go back again to sprinkle some reaper dust later today, and remove the bits of shrub I cut off in the dark last night.
Paracetamol, (Tylenol) Ibuprofen and Chlorphenamine Maleate at 11.00pm ensured a good nights sleep, woke a few times as normal. Did go to a single Bootfair that was a bust, except for a single sign. However, the sting had swollen up and is a handful today. https://hosting.photobucket.com/imag...8_IMG_3930.jpg |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Dam-iiiiiit.
When I was a kid I used to spray the wasp nests in our palm trees with a hose and swipe them out of the air when they attacked. They got me a few times over that summer. I never blew up like that - wow. We had a tree trim guy come buy once and trim the palms. He was stung many times that day and said he was used to it. Eeek They definitely get your attention. At my place in Texas I wait until night to use wasp spray, they're docile and you get em all at once. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
That looks a little sore! I think you need to medicate it from the inside out. Try a big Ice Cold Rum and Coke see if that don't help.
|
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Quote:
I never reacted that bad. And it’s gotten bigger. Ice pack helps a bit, but not much. Quote:
Yes it is actually sore. But that is life, I need a nurse like Eve to sort the swelling and pain. So last night I got stung, and they won. Certainly the the last laugh Buggers https://hosting.photobucket.com/imag...af094ec536.JPG So on inspection this morning after an uneventful Bootfair, one could see the entrance and loads of wasps around. Probably 10 in front, darting in and out constantly. https://hosting.photobucket.com/imag..._IMG_3947.HEIC So I waited till about 11.30 to go build a new weapon. The Reaper Stick. Can of wasp spray and Ducktape on a stick. https://hosting.photobucket.com/imag...D_IMG_3948.jpg Setting off the poison was a challenge, to get the Ducktape to depress and keep down, the button. https://hosting.photobucket.com/imag...1daaf0296f.JPG And then in there, I also manipulated it for a bit, to get the most to spread around a bit. https://hosting.photobucket.com/imag...7521af58e5.JPG Will go back and inspect tomorrow, and if not traffic, then it will be time to dig it all up. Maybe get back into the shed. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
|
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Well I hope that you took care of them suckers for good this time!
|
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Quote:
Report later, after food. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
So after the stick of doom visited the nest twice yesterday, there were a few stragglers left today.
I would say they had won. This morning after my shower, it was obvious I need to be careful as my body does not like this poison. https://hosting.photobucket.com/imag..._IMG_3971.HEIC Chatting to Mickey over the fence, he said he had a solution, and less than 5 minutes later, he was there. Can of Asda (Walmart) wasp killer in hand. I was still trying to warn him when he was straight in....... https://hosting.photobucket.com/imag..._IMG_3978.HEIC After a few minutes, and a pair of gloves. And ripping the log out and tossing it on the lawn. https://hosting.photobucket.com/imag..._IMG_3979.HEIC Incredible how neatly they have hollowed out that log. https://hosting.photobucket.com/imag..._IMG_3980.HEIC And contents of the poison, I went back to ASDA to see if there was any in stock, nope. Maybe banned? As the wasps just fall out of the air when you spray. https://hosting.photobucket.com/imag..._IMG_3981.HEIC Tomorrow I will inspect again, and if no more wasps, I will clear up there cut back the shrubs a bit. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Bunch from the internet.
Just coz we like them. https://hosting.photobucket.com/imag...C_IMG_1048.JPG https://hosting.photobucket.com/imag...1_IMG_1047.JPG https://hosting.photobucket.com/imag...0_IMG_1046.JPG https://hosting.photobucket.com/imag...5_IMG_1044.JPG https://hosting.photobucket.com/imag...0_IMG_1043.JPG https://hosting.photobucket.com/imag...E_IMG_1042.JPG https://hosting.photobucket.com/imag...C_IMG_1040.JPG |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Turns out, neither Sally, nor Greg the current lodger (Leaving on Friday) have ever held or shot anything except for shooting off their mouths.
So a few beers, targets and two air rifles later, we had a full evening of fun. https://hosting.photobucket.com/imag...9_IMG_3669.jpg Started with the targets, set up at 24 meters, or 75 foot distance https://hosting.photobucket.com/imag...70d50e8217.JPG Sally got to shoot first, every shot, accompanied by a loud scream, and the fourth one followed by “I don’t want to do this anymore” https://hosting.photobucket.com/imag...724537ab34.JPG Interesting, that at this distance, with a .177 calibration, she put this grouping together. Meant less competition for the rest of the evening, while she carried the beers and checked and marked off the groupings as we went through them. https://hosting.photobucket.com/imag...a8cdf23c58.JPG Spotter. https://hosting.photobucket.com/imag...43cc41d503.JPG https://hosting.photobucket.com/imag..._IMG_3719.HEIC https://hosting.photobucket.com/imag..._IMG_3704.HEIC Good for a first time. https://hosting.photobucket.com/imag..._IMG_3718.HEIC Later, after the plying, we were sitting chatting outside till the mosquitos chased us indoors. https://hosting.photobucket.com/imag...dd0d7e5887.JPG I had just gone to fetch another beer when I heard screams, male and female. Came back to this..... https://hosting.photobucket.com/imag..._IMG_3652.HEIC https://hosting.photobucket.com/imag..._IMG_3653.HEIC Seems these two don’t like spiders much. A great evening |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Fun times. My cousins and I would sit at the back door of our grandfather's house doing the same thing when were kids. Got to a point wear paper targets was not enough, so cans, toy army men, even the pecans still in the trees became the targets...
|
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Quote:
But that level where individual pecans fall one shot at a time, reserved for the real hunters. My uncle could shoot a .22 rifle and hit running hares, rabbits, rats while driving in his ploughed fields with his truck. A true dead eye shot. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Hi team
Despite living in England, I know answers are everywhere Was wondering what options are out there for lifting cars (think American and bigger than Micra or Fiat 500) I am busy with this slow build carport that will be low as 7’4” or 2200mm or 2.2 meters on the beams. The Galaxy is about 5’10” or 1800mm or 1.8 meter tall. So it leaves about 18” or 450mm to rise to the minimum. If you come forward toward the entrance though it increases to as much as 8’ or 2400mm or 2.4meter but you lose most of your cover. When I welded the Blazer it was just axle stands and replacing the front end parts was similar with a tall jack and axle stands. Up she goes. Or is it a he?? http://i294.photobucket.com/albums/m...psg8roaiz7.jpg Made safe-ish. http://i294.photobucket.com/albums/m...psaywt1vb2.jpg Or the rear Up it goes. And yes, axle stands too. http://i294.photobucket.com/albums/m...psyyyjxoi0.jpg Up on axle stands, wheels off http://i294.photobucket.com/albums/m...psyjuqhyij.jpg So I am wondering if any of these low lift type hobbyist lifts are worth having. They ideally need to store in a way that you can park a car/truck on top of or over them. All advice, experience and input appreciated. I am happy to carry on with jack and axle stands if thats the concensus. Thanks. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Here are a couple of options for you:
https://www.quickjack.com/ https://www.maxjax.com/maxjax-right-for-you/ Possible drawback for you on the maxjax is that it should be bolted down when in use. Your paving stones would not allow that to be done... For doing things like brakes and suspension work, the quickjack might be a good option. There are others on the market, but I knew about these two. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Kwik-Lift you can drive on and park when down. I had one. https://www.kwik-lift.com/products/?...UaAjPaEALw_wcB
|
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Quote:
Morning mate, it seems the Quickjack gets a load of yes votes, here and the USA Quote:
Being able to move, or store them flat is important. More here https://forum.retro-rides.org/thread...regular-garage I like the idea of using an old forklift truck mechanism modified too. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
I like the quick jack option, but it seems like it would be in the way more than standard jack stands. I am not that old yet, so the old fashion way is still my choice. (I am sticking with that last statement regardless of what my body says) Also, getting the checkbook open is tuff, even if I wasn't married to an accountant, I am CHEAP. :lol:
|
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Quote:
The current build has shown me that I can change stuff, so maybe something submerged slightly to get a fairly level floor could be an option. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
We do like a BBQ
@Totti knows..... Ordered 30kg of BBQ Briquettes from Germany Let’s hope the reviews are accurate. https://hosting.photobucket.com/imag..._IMG_4094.HEIC Over the weekend, Sally asked me to help her do a sign for a work friend and colleague who had a double mastectomy. So I agreed. Ended up doing three, for two of her friends and her colleague Starting wit a rough sign, then a background painted on. https://hosting.photobucket.com/imag..._IMG_3840.HEIC Resulting in https://hosting.photobucket.com/imag...A_IMG_3860.jpg The other with added detail.... https://hosting.photobucket.com/imag..._IMG_3870.HEIC Result https://hosting.photobucket.com/imag...4_IMG_3871.jpg And 5 hrs later, seriously. https://hosting.photobucket.com/imag...2_IMG_3874.jpg The next big job was to wrap up the carport and driveway posts that had to be redone. Greg, the lodger, who left today helped after Andy moved out, he also taught me a whole lot about welding. He finished off the plates for me too. https://hosting.photobucket.com/imag..._IMG_4057.HEIC https://hosting.photobucket.com/imag...7_IMG_4072.MOV https://hosting.photobucket.com/imag..._IMG_4065.HEIC DONE. Galvazinc after finishing off. https://hosting.photobucket.com/imag..._IMG_4074.HEIC Spoke to the steel guy today, he should be here to do the steel work in two weeks. Price was a nice surprise. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Signs went down well.
It seems her bestie and her husband just can’t decide where to put it. https://hosting.photobucket.com/imag...ed9ebc915e.JPG I fetched the Custom Chevy C10 cab lifter made about 6 years ago from mate Martins place, along with another tool. This has lived outdoors in all weathers, all the yea5s, so will need me to make some rot repairs as one end already fell off when I unloaded it. Makes lifting a four man lift Sized cab off the chassis on your own using the engine hoist a piece of cake. https://hosting.photobucket.com/imag..._IMG_4172.HEIC The cab roller frame, built by Martin is a brilliant tool, despite an old wooden pallet with wheels doing the same job. The cab floor is stepped, and that’s reflected in the design, then add in four mounting points to secure it, and you can roll the cab about while working on it. I will tidy it up and add some wheels before packing it away with the lifter for future use. https://hosting.photobucket.com/imag..._IMG_4173.HEIC Been thinking of what route to go with my garage and carport “Forecourt” once the roof is on. Years ago when I made this fake pump, these colours appealed, they still do. The question is, do I develop the fake theme or use an existing brand. Copy and paste Been pressure cleaning the deck, furniture and repairing and painting all the stuff. While waiting for paint to dry today I also applied the stickers I had made this week by a mate on the body of the dummy pump. http://i294.photobucket.com/albums/m...ps57bbe133.jpg Other side...... http://i294.photobucket.com/albums/m...ps0c522e11.jpg I still need to draw up the design and hand paint the Belisha beacon. But am procrastinating. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
When you buy one of these.....
https://hosting.photobucket.com/imag...8_IMG_4192.JPG To fix one of these. https://hosting.photobucket.com/imag...3_IMG_4193.JPG It is often,because you are skilled enough to produce one of these for your NASCAR truck build, in order to save weight. And change some subtle bits. Even if you kinda fail first time, and start again, it shows what you can and will do. https://hosting.photobucket.com/imag...D_IMG_4190.JPG https://hosting.photobucket.com/imag...5_IMG_4191.JPG https://hosting.photobucket.com/imag...6_IMG_4194.JPG Gel coat mould made https://hosting.photobucket.com/imag...0_IMG_4189.JPG Result https://hosting.photobucket.com/imag...2_IMG_4188.JPG One small bubble to fix. Looks like Dennis is onto a winner again. https://hosting.photobucket.com/imag...E_IMG_4187.JPG He also needs a custom front splitter to aid aerodynamic flow. Anyone doing them for 66 C10’s ? https://hosting.photobucket.com/imag...0_IMG_4186.JPG Back home, he and Tally offered it up to the trucks front end. Looks right to me. Next job: Build a glass fibre hood/bonnet to reduce weight. Seems a slippery slope when you have over 800bhp under the hood, to start a weight loss Program https://hosting.photobucket.com/imag...F_IMG_1134.JPG Clem at rubatrucks.com in Fayetteville, Arkansas also sent Dennis a steel Quuic Fill filler neck this week for the truck. https://hosting.photobucket.com/imag...3_IMG_1135.JPG Bit by bit this crazy build is coming together too. Soon it will be Black Lines all over Missouri. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
This thread has been going since October 2010
https://forum.retro-rides.org/thread...pdated-23-2020 And I certainly have collected, and shared out some free stuff. Perfectly timed by mate Scott @Jabbo was an offer of a used (not a SnapOn) wheeled toolbox for my garage. I have a SnapOn item that came here for £75.00 a year or two ago from a mate. But this will be great for the extra stuff laying about, especially with the current carport build. https://hosting.photobucket.com/imag...822_144705.JPG Including 30 mile delivery, it has the feel of a bargain. Life continues to be good. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
I mentioned previously that my karma bucket was overflowing.
Where Sally lives, a bunch of paving guys with a Transit pickup and some vans have been doing a load of paving for older residents. Her neighbour two houses down asked if she wanted to buy a mower (petrol, she likes electric) so she declined. But asked me when I popped around. I went to look, and it came home with me, along with two tools, a Jerry can and some fuel, all for £100.00 https://hosting.photobucket.com/imag..._IMG_4203.HEIC Happy with that as I have been looking for some time but prices put me off. https://hosting.photobucket.com/imag..._IMG_4205.HEIC Tried it out yesterday. https://hosting.photobucket.com/imag...06482D0639.JPG After that, I went to the shop and cleaned, primed and painted the cab roller frame for the C10 Just need to fit some wheels to it today, then we have a complete tool. I also need to work on the cab lifter tool, as it has rotten out around the mounting screws at the ends from living outdoors for years. https://hosting.photobucket.com/imag..._IMG_4218.HEIC Coming together now. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
1 Attachment(s)
Nice find on the mower stuff. On your cab dolly, make sure you use some large capacity and diameter wheels. Mine had smaller diameter wheels at first and with the weight of the cab on it, it didn't wheel around very well
|
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Quote:
The wheels I have a re bigger than yours, and I would have tried to use them. The ones Martin took off the trolley before giving it to me have a wider set of mounting points, so I may modify the mounts, or look out for a set of even larger Wheels with appropriate mounting points. Regardless, I think that the ones I have will work, even on my paved driveway Could be used as part of your car. OR Use it as the drop down door for your booze cabinet next to your outdoor BBQ area. Collection only please. PM gives you first dibs. https://hosting.photobucket.com/imag...017BAB8EE5.JPG After the “ failed “ Bootfair, Sally and I climbed into the garden and cleared beds, moved my Ogre to a new open space as he had disappeared into the growth over time. I carried him to the 4 foot wall, Sally and I tried to get him on the plinth, but she is a girl, so I called my favourite 76 year old neighbour over to just help me safely get it up. Easy. Had him about 15 years. https://hosting.photobucket.com/imag...bb96fec865.JPG Loads of other jobs, including pruning, clearing and also doing a final number on the subterranean part of the wasp nest, finally covering it with soil. Seems I now own a shed again. And @Glenanderson has a spares mower. https://hosting.photobucket.com/imag..._IMG_4239.HEIC Galaxy was roped into action as well. VIDEO LINK. https://youtu.be/Wm4nIWjbPCk Not the first time. As was Prozac before. NOW TIME FOR A BEER AND SOME LUNCH METHINKS. Been a nice weekend. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Am I the on;y one who has three or four future cars/projects spinning around in my head, while having one to still complete?
@georgeb and @joem83 @pauly there you go. Part of my future planning or dreaming is something like these Owner type, or Tamiya style cars mostly seen in the Philippines. One reply below, quoted from another forum regarding the Suzuki’s. I am just wondering, thinking if it is all do-able. RWD only needed, so front end may need to be addressed too, you guys tell me. [font color="d719e6"] Quote:
Thanks guys. And NeverRodeBefore, thats a great reply. Hopefully you can do more input and a bit more on chassis rot or not. I am thinking (part of future planning) of rebodying a Vitara or something with a chassis. Rather than use an old home built kit car frame, use something that has most of the bits in the right place. Never done it before but think it is within my abilities. AND I WANT TO LOWER IT QUITE A BIT This is the idea. VIDEO: https://youtu.be/AGF50KECfPE https://hosting.photobucket.com/imag...7_IMG_1150.JPG https://hosting.photobucket.com/imag...D_IMG_1149.JPG https://hosting.photobucket.com/imag...F_IMG_1151.JPG I think a rebody will be doable in the current IVA and various test criteria. Of course, all of this could just be a dream and foolish, hopefully those who really know their stuff will input with encouragement or warnings. Thanks. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Those Jeep things reminds me of a RoadKill episode with Frieberger and Finnegan in a lowered Jeep. Not my style, but they look OK.
AS far as looking and thinking about the next ride, ALWAYS Rian. I look daily and ponder. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Quote:
|
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Quote:
Yes, that Roadkill jeep was good. I need something a bit different Quote:
This would resort under the filing area of Stupid Cars. So remember the cab lifter. https://youtu.be/vfTC9wyQKK0 It has spent a lot of time outside, degenerating, and in fact, on my drive the one end fell off completely. So how do you fix wood? With welding, it’s always easy to melt more metal back into a hole. So I dismantled both ends and filled the holes with thin dowels I had cut from some scrap wood. Then drove new, 45mm longer screws into the holes. https://hosting.photobucket.com/imag..._IMG_4320.HEIC Then painted it all up once reassembled. https://hosting.photobucket.com/imag..._IMG_4326.HEIC Done. https://hosting.photobucket.com/imag..._IMG_4334.HEIC And of course waiting...... truck. https://hosting.photobucket.com/imag...7_IMG_4317.JPG |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
|
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Great work on the truck body lift. I built one for my build previously. Although I have since used the wood elsewhere. :)
|
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Quote:
This is PaulY doing his thing outside my hose a few years ago..... https://youtu.be/ucVmsET4BFw Note the load of steel garage furniture on the rear. |
All times are GMT -4. The time now is 09:36 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com