Re: PO has me PO'd
 

picked up my -12 and -10 block off caps, now I can continue on with the cooling system check, hopefully no leaks
https://farm5.staticflickr.com/4303/...9060ac4f_c.jpg[url=https://flic.kr/p/Wt4mBG]20170724_180453


also found my aluminum ring I made for the fuel pump hold down, now I can finish that up, after I find a schematic for the pump

https://farm5.staticflickr.com/4302/...cf090b2e_c.jpg[url=https://flic.kr/p/VQ423r]20170724_144842

Re: PO has me PO'd
 

four years and finically,have my aluminum rad. mounted to the 67-68 front core support (only designed for a two row rad.)using four row rubber bushes and brackets

https://farm5.staticflickr.com/4318/...07d07b5c_c.jpg[url=https://flic.kr/p/Wv5Cfw]20170725_161156

5/16tpi stud was the key to pull down straight, and then use the OEM bolt. bought a bag of them at Fastenal thru AUeevo black phorous coated and washer that rotates but doesn't come off

Re: PO has me PO'd
 

This ought to be interesting, not a clue how to set up timing

Stabbing my dual sync distri.at least I remembered the gasket

https://farm5.staticflickr.com/4317/...1cf29383_c.jpg[url=https://flic.kr/p/X6QNkf]20170727_164113

Re: PO has me PO'd
 

OK, I quit....EFI is not in my ability, carb and distri. is in my future for now. But, which one?

Re: PO has me PO'd
 

Jim
Sorry to hear that. You have put a lot of work into that efi.

Re: PO has me PO'd
 

thanks Richard, but I may have spoken to soon. Talked to a couple more knowledgeable people the other day, and found out that the fast dual sync distri. is the hard way to go! EFI Connections out of Erie Pa. set me up with a aluminum timing chain cover with an internal crank trigger and 4 pole reluctor ring. Also, a distri. with a built in cam sensor. There is a OEM one year only distri., but I don't feel like sourcing that out.

My installer quoted me a price of 1500- 2500 to wire this animal up, and dyno time to get it running right.

Parts should be in, in a couple weeks. In the meantime, I get to tear the front of my engine apart one more time. Thank goodness I have that cross member that my son and I had modified from DIY4x4, makes it much easier to drop the pan

Anyone want to buy a Cloyes timing cover with cam button? I'll be posting it soon in the classified section

Thanks for watching, this beast may work soon

Re: PO has me PO'd
 

started to take the front of motor off again, still have to pull timing chain cover and oil pan

https://farm5.staticflickr.com/4382/...1d6f933e_c.jpg[url=https://flic.kr/p/XS1yBU]20170906_072038

Re: PO has me PO'd
 

since my crank moved, had to return to TDC. Now I have to find a bucket that hold 7 quarts of oil and zinc additive

https://farm5.staticflickr.com/4395/...3dd10ffd_c.jpg[url=https://flic.kr/p/YfDdRB]20170906_081337

Re: PO has me PO'd
 

My parts came in today from EFI Connections, cam and crank triggers. Along with the 4x reluctor

https://farm5.staticflickr.com/4433/...8f3cf9dc_c.jpg[url=https://flic.kr/p/Xqged3]20170913_153143

Re: PO has me PO'd
 

talked to EFI, and they said the clearance between the reluctor ring tooth and sensor s/b 30 thou. measured mine and came up with 23 thou., so I added a 10 thou. spacer

https://farm5.staticflickr.com/4383/...7326e799_c.jpg[url=https://flic.kr/p/XsTuTh]20170915_091544

Re: PO has me PO'd
 

timing chain cover installed, with crank sensor

word of caution...with the reluctor installed, it will push your balancer out maybe 100 thou., so alignment of belts and pulleys may be a problem in my future, we'll have to wait and see

https://farm5.staticflickr.com/4360/...88c86665_c.jpg[url=https://flic.kr/p/Ys8DTU]20170915_095530

Re: PO has me PO'd
 

stabbed the cam sensor this afternoon, no problems

https://farm5.staticflickr.com/4358/...a4527d6d_c.jpg[url=https://flic.kr/p/XtEeJj]20170915_192613

Re: PO has me PO'd
 

All you have to do is turn the correct amount off of the snout of the balancer or find a balancer from a L31 Vortec.

Re: PO has me PO'd
 

perfect solutions, thank you! I would've never thought of that....did you ever get yours running?

Re: PO has me PO'd
 

timing chain cover sealed and torqued to 12 ft/lbs. next step turn down balancer

https://farm5.staticflickr.com/4359/...25584a36_c.jpg[url=https://flic.kr/p/Yvjn1m]20170916_091148

Re: PO has me PO'd
 

None of my projects are running.......no time with working 80hrs/7 days a week every week.

Re: PO has me PO'd
 

Kinda hard to hold w/p, 4 gaskets and 2 March brackets in alignment at the same time, so I use exhaust studs for alignment, then remove to bolt up....

Captain, good for the income, bad for the toys! Glad I'm outta that rat race

https://farm5.staticflickr.com/4395/...273a71f8_c.jpg[url=https://flic.kr/p/Yx1wru]20170917_080854

Re: PO has me PO'd
 

[url=https://flic.kr/p/YCJ9iC]https://farm5.staticflickr.com/4339/...7877c5b2_c.jpg

the gaskets had a chance to set up, so, I took one bolt out at a time and reinstalled with thread sealer. Left side mounting bolts were a PITA, had to use a ball end allen wrench to tighten

Re: PO has me PO'd
 

back in the blue.....4 salmon hooked up, 2 netted and released, 2 foul hooked, broke off

pics to follow, trying to get off of iphone

got my photos out of hock with photo bucket...thanks rsgt

Re: PO has me PO'd
 

definition of insanity; doing the same thing over and over expecting differant results

My prndl pointer keeps coming out of the notch in the housing

https://farm5.staticflickr.com/4381/...af5cc380_c.jpg[url=https://flic.kr/p/Y1EoRm]

Re: PO has me PO'd
 

https://farm5.staticflickr.com/4478/...f250f6a4_c.jpg[url=https://flic.kr/p/BZtDDj]

I think it's the height of the prndl lenses

Re: PO has me PO'd
 

https://farm5.staticflickr.com/4450/...429c277a_c.jpg[url=https://flic.kr/p/Z5Fqys]20171005_102042

edit: save space for future inteligent comment

Re: PO has me PO'd
 

saw foose use this method for installing porshe headlights in an europa. remove tape and install on white board.

Need to install computers under dash on a flat surface. 1/4 inch flange on plates

https://farm5.staticflickr.com/4446/...13b59657_c.jpg[url=https://flic.kr/p/ZhV4cq]20171011_101608

Re: PO has me PO'd
 

a little closer to final shape

https://farm5.staticflickr.com/4513/...80eeaaf6_c.jpg[url=https://flic.kr/p/ZpbP9r]20171013_115359

Re: PO has me PO'd
 

https://farm5.staticflickr.com/4513/...80eeaaf6_c.jpg[url=https://flic.kr/p/ZpbP9r]20171013_115359