Re: PO has me PO'd
picked up my -12 and -10 block off caps, now I can continue on with the cooling system check, hopefully no leaks
https://farm5.staticflickr.com/4303/...9060ac4f_c.jpg[url=https://flic.kr/p/Wt4mBG]20170724_180453 also found my aluminum ring I made for the fuel pump hold down, now I can finish that up, after I find a schematic for the pump https://farm5.staticflickr.com/4302/...cf090b2e_c.jpg[url=https://flic.kr/p/VQ423r]20170724_144842 |
Re: PO has me PO'd
four years and finically,have my aluminum rad. mounted to the 67-68 front core support (only designed for a two row rad.)using four row rubber bushes and brackets
https://farm5.staticflickr.com/4318/...07d07b5c_c.jpg[url=https://flic.kr/p/Wv5Cfw]20170725_161156 5/16tpi stud was the key to pull down straight, and then use the OEM bolt. bought a bag of them at Fastenal thru AUeevo black phorous coated and washer that rotates but doesn't come off |
Re: PO has me PO'd
This ought to be interesting, not a clue how to set up timing
Stabbing my dual sync distri.at least I remembered the gasket https://farm5.staticflickr.com/4317/...1cf29383_c.jpg[url=https://flic.kr/p/X6QNkf]20170727_164113 |
Re: PO has me PO'd
OK, I quit....EFI is not in my ability, carb and distri. is in my future for now. But, which one?
|
Re: PO has me PO'd
Jim
Sorry to hear that. You have put a lot of work into that efi. |
Re: PO has me PO'd
Quote:
My installer quoted me a price of 1500- 2500 to wire this animal up, and dyno time to get it running right. Parts should be in, in a couple weeks. In the meantime, I get to tear the front of my engine apart one more time. Thank goodness I have that cross member that my son and I had modified from DIY4x4, makes it much easier to drop the pan Anyone want to buy a Cloyes timing cover with cam button? I'll be posting it soon in the classified section Thanks for watching, this beast may work soon |
Re: PO has me PO'd
started to take the front of motor off again, still have to pull timing chain cover and oil pan
https://farm5.staticflickr.com/4382/...1d6f933e_c.jpg[url=https://flic.kr/p/XS1yBU]20170906_072038 |
Re: PO has me PO'd
since my crank moved, had to return to TDC. Now I have to find a bucket that hold 7 quarts of oil and zinc additive
https://farm5.staticflickr.com/4395/...3dd10ffd_c.jpg[url=https://flic.kr/p/YfDdRB]20170906_081337 |
Re: PO has me PO'd
My parts came in today from EFI Connections, cam and crank triggers. Along with the 4x reluctor
https://farm5.staticflickr.com/4433/...8f3cf9dc_c.jpg[url=https://flic.kr/p/Xqged3]20170913_153143 |
Re: PO has me PO'd
talked to EFI, and they said the clearance between the reluctor ring tooth and sensor s/b 30 thou. measured mine and came up with 23 thou., so I added a 10 thou. spacer
https://farm5.staticflickr.com/4383/...7326e799_c.jpg[url=https://flic.kr/p/XsTuTh]20170915_091544 |
Re: PO has me PO'd
timing chain cover installed, with crank sensor
word of caution...with the reluctor installed, it will push your balancer out maybe 100 thou., so alignment of belts and pulleys may be a problem in my future, we'll have to wait and see https://farm5.staticflickr.com/4360/...88c86665_c.jpg[url=https://flic.kr/p/Ys8DTU]20170915_095530 |
Re: PO has me PO'd
stabbed the cam sensor this afternoon, no problems
https://farm5.staticflickr.com/4358/...a4527d6d_c.jpg[url=https://flic.kr/p/XtEeJj]20170915_192613 |
Re: PO has me PO'd
All you have to do is turn the correct amount off of the snout of the balancer or find a balancer from a L31 Vortec.
Quote:
|
Re: PO has me PO'd
Quote:
|
Re: PO has me PO'd
timing chain cover sealed and torqued to 12 ft/lbs. next step turn down balancer
https://farm5.staticflickr.com/4359/...25584a36_c.jpg[url=https://flic.kr/p/Yvjn1m]20170916_091148 |
Re: PO has me PO'd
None of my projects are running.......no time with working 80hrs/7 days a week every week.
Quote:
|
Re: PO has me PO'd
Kinda hard to hold w/p, 4 gaskets and 2 March brackets in alignment at the same time, so I use exhaust studs for alignment, then remove to bolt up....
Captain, good for the income, bad for the toys! Glad I'm outta that rat race https://farm5.staticflickr.com/4395/...273a71f8_c.jpg[url=https://flic.kr/p/Yx1wru]20170917_080854 |
Re: PO has me PO'd
[url=https://flic.kr/p/YCJ9iC]https://farm5.staticflickr.com/4339/...7877c5b2_c.jpg
the gaskets had a chance to set up, so, I took one bolt out at a time and reinstalled with thread sealer. Left side mounting bolts were a PITA, had to use a ball end allen wrench to tighten |
Re: PO has me PO'd
back in the blue.....4 salmon hooked up, 2 netted and released, 2 foul hooked, broke off
pics to follow, trying to get off of iphone got my photos out of hock with photo bucket...thanks rsgt |
Re: PO has me PO'd
definition of insanity; doing the same thing over and over expecting differant results
My prndl pointer keeps coming out of the notch in the housing https://farm5.staticflickr.com/4381/...af5cc380_c.jpg[url=https://flic.kr/p/Y1EoRm] |
Re: PO has me PO'd
https://farm5.staticflickr.com/4478/...f250f6a4_c.jpg[url=https://flic.kr/p/BZtDDj]
I think it's the height of the prndl lenses |
Re: PO has me PO'd
https://farm5.staticflickr.com/4450/...429c277a_c.jpg[url=https://flic.kr/p/Z5Fqys]20171005_102042
edit: save space for future inteligent comment |
Re: PO has me PO'd
saw foose use this method for installing porshe headlights in an europa. remove tape and install on white board.
Need to install computers under dash on a flat surface. 1/4 inch flange on plates https://farm5.staticflickr.com/4446/...13b59657_c.jpg[url=https://flic.kr/p/ZhV4cq]20171011_101608 |
Re: PO has me PO'd
a little closer to final shape
https://farm5.staticflickr.com/4513/...80eeaaf6_c.jpg[url=https://flic.kr/p/ZpbP9r]20171013_115359 |
Re: PO has me PO'd
https://farm5.staticflickr.com/4513/...80eeaaf6_c.jpg[url=https://flic.kr/p/ZpbP9r]20171013_115359
|
All times are GMT -4. The time now is 01:43 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com