The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   General Discussion (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=15)
-   -   What did you do today not on your truck... (https://67-72chevytrucks.com/vboard/showthread.php?t=810698)

mr.mud1 07-11-2023 10:54 PM

Re: What did you do today not on your truck...
 
Quote:

Originally Posted by FleetsidePaul (Post 9219182)
Your yard makes me want to play golf.

well bring your clubs and come ahead.we have lots or room.you or any of the guys are welcome anytime.

mr.mud1 07-11-2023 11:07 PM

Re: What did you do today not on your truck...
 
2 Attachment(s)
i had nothing much to do on my truck,the sky was threatening rain so i didn't want to go mow or spend time with the tractor and the bush hog,so because i'm not all there,i guess i decided since the paint on my Mustang felt like sandpaper??it would be a good day to use the clay bar and put a coat of wax on it.humidity of about 95 million percent,it didn't take much rubbing,i had sweat running out of places i didn't know could sweat?i rubbed a bunch of red crap off it anyway?no idea what it was but it was smooth when i finished and looked good once waxed.i changed the oil and filter as it was due and while up on the lift,notiiced my new Yokohama tires i waited 4 months for,installed on the front with a new wheel alignment in May,wearing on the inside rib,just as the Pirelli tires that were on it,worn off the inside right down to the steel cords?another appointment Friday with the shop that just lined it up?i love this car but it eats tires?Ford already changed all 4 Pirelli's it came with under warranty and they lasted no time?got to come up with something better than this?

special-K 07-12-2023 05:29 AM

Re: What did you do today not on your truck...
 
About your property, for me it gets no better than to have natural features present on or near your own property. You have God's landscaping (then there's the part some mortal named Greg keeps up :lol:

Mustang front tires, that sucks. I went through rear tires every 8,000 miles with my '92 K3500. Went round and round under warranty, where they did nothing. One symptom was wet brake shoes, so locked up when wet. Dealer: "We can't get the brakes to lock up. come and get it". Me: "Got a hose? Call me when it's fixed". So a new axle seal and brake shoes, two weeks later locking brakes in wet.

I didn't notice the tire problem until the second set of bigger tires. This went on and on and I just kept buying rear tires. Went to a tire shop for a 4 wheel thrust alignment check. "There's no adjustment on the rear". "Do it anyway, I want a reading". About 3/8" off each side toed-in. Finally I bought a junk yard rear. Removing the old rear is when I notice the driver side leaf was tilted and shackle bent some. Get it all loose and the axle tube could be moved around. It was never welded to the carrier and the leaf spring held it in place.

special-K 07-12-2023 08:19 AM

Re: What did you do today not on your truck...
 
1 Attachment(s)
I'll tell you what I did yesterday. I am restored four 4 panel doors at this 1800s farmhouse. There is a little garage away from the house and due to thunderstorms everyday I set my EZ-up just outside a door so I am shaded and can duck in with the door when the rain comes. There is a loft with a bunch of stuff in the garage. I swear it wasn't there until the lady came to talk to me, because I would have noticed! I almost walked into the tail end of a big black snake. Made no sense. What was it doing, backing down? It didn't move, it was dead. There is a chimney cap that has expanded steel grille work that had a sloppy rolled up plastic mess, I guess critter fencing for the garden. I climbed up and saw it's head was coming out of that mess. It got caught and died. I take it down and you know what? It was the fourth victim!! There were the remains of three other black snakes caught in that mess... 4!! Not a thing I expected to be dealing with restoring doors. My camera is on the blink, but I have a picture of the garage

Boog 07-12-2023 10:11 AM

Re: What did you do today not on your truck...
 
Yikes. That'll get your heart a racing. ;)

mr.mud1 07-12-2023 07:05 PM

Re: What did you do today not on your truck...
 
racing??might make the old thing stop??

mr.mud1 07-12-2023 07:17 PM

Re: What did you do today not on your truck...
 
2 Attachment(s)
just cause i'm a sucker for punishment,i had an old girl call,a resident in an old folks home where i have a couple Uncle's and an Aunt living.they recommended me to put brake pads on this old girl's 2015 (i think) Honda Civic.i usually feel sorry for the old people,not alot of money and on and on,cry me a river,anyway i said i'd have a look.i said you need more than a set of brake pads?rotors,pads all shot,worst i've seen in a long time.4 bald tires,a Nova Scotia Safety Inspection sticker on the windshield expired a year ago.shouldn't be on the road at all?amazing how we treat these old trucks with lots of TLC and there's people with this junk on the road out among the rest of us that care about our stuff.unbelievable.brakes all fixed,waiting for tires(she wanted 3,i said you need 4 or leave it parked?)

mr.mud1 07-12-2023 07:23 PM

Re: What did you do today not on your truck...
 
Quote:

Originally Posted by special-K (Post 9219274)
About your property, for me it gets no better than to have natural features present on or near your own property. You have God's landscaping (then there's the part some mortal named Greg keeps up :lol:

Mustang front tires, that sucks. I went through rear tires every 8,000 miles with my '92 K3500. Went round and round under warranty, where they did nothing. One symptom was wet brake shoes, so locked up when wet. Dealer: "We can't get the brakes to lock up. come and get it". Me: "Got a hose? Call me when it's fixed". So a new axle seal and brake shoes, two weeks later locking brakes in wet.

I didn't notice the tire problem until the second set of bigger tires. This went on and on and I just kept buying rear tires. Went to a tire shop for a 4 wheel thrust alignment check. "There's no adjustment on the rear". "Do it anyway, I want a reading". About 3/8" off each side toed-in. Finally I bought a junk yard rear. Removing the old rear is when I notice the driver side leaf was tilted and shackle bent some. Get it all loose and the axle tube could be moved around. It was never welded to the carrier and the leaf spring held it in place.

thanks Tim.we are so fortunate to be here,we love the place.we lived on a 100 x 100 lot near Halifax and it's gone in the fires.i always wanted a big lawn to mow.careful what you wish for,i got it.by the time i get this done,it's time to start again.no complaints,we love it here.interesting about your truck and you tire problems,hopefully they'll have something to offer on Friday.i have to go to Ford as well about a recall.depending what the alignment shop finds or has to offer,i may check at Ford.it's passed warranty so i doubt they have any magic to offer but you never know?take care.Greg

Boog 07-12-2023 07:24 PM

Re: What did you do today not on your truck...
 
There are SO many clueless drivers out there. You did the right thing.

LS short box 07-12-2023 08:57 PM

Re: What did you do today not on your truck...
 
I blocked sanded the cab of a Ford F150. Such fun.

72c20customcamper 07-12-2023 09:36 PM

Re: What did you do today not on your truck...
 
Quote:

Originally Posted by LS short box (Post 9219451)
I blocked sanded the cab of a Ford F150. Such fun.

As I remember you’re doing exchange work for work on your truck right .

Steeveedee 07-12-2023 11:13 PM

Re: What did you do today not on your truck...
 
The roofer came back and discussed our roof replacement. Materials are at scandalous prices these days, still. I'm not going to discuss the price estimate here.

GOPAPA 07-13-2023 12:42 PM

Re: What did you do today not on your truck...
 
Quote:

Originally Posted by Steeveedee (Post 9219477)
The roofer came back and discussed our roof replacement. Materials are at scandalous prices these days, still. I'm not going to discuss the price estimate here.

Going to have a new asphalt roof put on this year too..I am not healthy enough any more to be on a roof..and I have done a few,,, estimate is around 14K '''''''''''''OUCH!!

FleetsidePaul 07-13-2023 01:10 PM

Re: What did you do today not on your truck...
 
Drained my pool. It didn't look that bad when it had water in it. Pretty good actually. Now it looks like a dirty toilet bowl.

Steeveedee 07-13-2023 01:51 PM

Re: What did you do today not on your truck...
 
Quote:

Originally Posted by GOPAPA (Post 9219600)
Going to have a new asphalt roof put on this year too..I am not healthy enough any more to be on a roof..and I have done a few,,, estimate is around 14K '''''''''''''OUCH!!

I have a 2105 Sq Ft house. Should have had it done 3 years ago, before material prices got stupid high.

72c20customcamper 07-13-2023 06:07 PM

Re: What did you do today not on your truck...
 
3 Attachment(s)
Bought a Jeep .1998 4.0 manual transfer case 4x4. Only spot of rust is on the drivers side rocker . The hood came up on him while he was driving it so it’s sprung won’t closed it don’t look to bad I may be able to fix it . Leather seats in front are ripped rear is perfect. AC works as does everything else truck has 184k miles . So I’m going to do a fast freshening up on it and sell my Envoy use this one in the winter . Rear tailgate is pristine you don’t see that very often the drivers side flairs are in the truck . Typical fix on these as the retainer was cheap stamped steel that rusted away

FleetsidePaul 07-13-2023 06:49 PM

Re: What did you do today not on your truck...
 
Quote:

Originally Posted by GOPAPA (Post 9219600)
Going to have a new asphalt roof put on this year too..I am not healthy enough any more to be on a roof..and I have done a few,,, estimate is around 14K '''''''''''''OUCH!!

Now you're scaring me. I need a roof on my barn. It's not huge but it's barn shaped. Quite a bit of pitch on it. :lol:

I got some quotes on painting my house. I knew going in that it was going to be a lot of money. It's a big house and has a ton of woodwork that needs a lot of prep. They estimate about 3 weeks of work. 27K. Ouch is right. :smoke:

72c20customcamper 07-13-2023 07:17 PM

Re: What did you do today not on your truck...
 
Quote:

Originally Posted by FleetsidePaul (Post 9219667)
Now you're scaring me. I need a roof on my barn. It's not huge but it's barn shaped. Quite a bit of pitch on it. :lol:

I got some quotes on painting my house. I knew going in that it was going to be a lot of money. It's a big house and has a ton of woodwork that needs a lot of prep. They estimate about 3 weeks of work. 27K. Ouch is right. :smoke:

Roofing is all over the place and there are a lot of swindlers out there . One guy came in a brand new F350 and looked it over for a couple of minutes and gave my mom a quote for 30k next guy 26k . The guy who built the homes in the 70s who has retired had his son come by his quote 18k with Owen's 45 yr roofing and ice shield up 6 feet from the soffits. He buys trailer loads of shingles from GAF directly .

I did the roof 28 years ago with my BIL .

Steeveedee 07-13-2023 08:23 PM

Re: What did you do today not on your truck...
 
Quote:

Originally Posted by FleetsidePaul (Post 9219667)
Now you're scaring me. I need a roof on my barn. It's not huge but it's barn shaped. Quite a bit of pitch on it. :lol:

I got some quotes on painting my house. I knew going in that it was going to be a lot of money. It's a big house and has a ton of woodwork that needs a lot of prep. They estimate about 3 weeks of work. 27K. Ouch is right. :smoke:

We had our rental house painted with Dunn-Edwards paint by a top-notch company for $6k, November of '21. 1800ish Sq Ft. I think you're getting swindled, to use Mark's term.

FleetsidePaul 07-14-2023 11:57 AM

Re: What did you do today not on your truck...
 
Quote:

Originally Posted by Steeveedee (Post 9219691)
We had our rental house painted with Dunn-Edwards paint by a top-notch company for $6k, November of '21. 1800ish Sq Ft. I think you're getting swindled, to use Mark's term.

I'm going to get some more estimates. But this place is 2800 Sq. Ft. and it's a single story ranch house, so it's looong. But the real kicker is the patio eaves and railing. It runs from stem to stern around the whole place and it hasn't been painted since Nixon was President. It's a crispy critter. It's going to take a lot of sandpaper and elbow grease. And I too am going with Dunn Edwards paint because it is really the best. It's worth the price.

These pic's are just one corner of the place. It just keeps going. But it gives you an idea of what I'm looking at.

http://67-72chevytrucks.com/gallery/...dium/Eaves.jpg

http://67-72chevytrucks.com/gallery/...um/Eaves_2.jpg

You can see the barn roof looks bad. But surprisingly it doesn't leak. It's still getting it replaced because it's wood shake and I'm in fire country. Not a good combination. I trimmed all the trees except that oak by my barn because it blocks my friendly :censored: neighbor. The tree guy laughed when I told him not to trim that one and why. :lol:

Steeveedee 07-14-2023 12:47 PM

Re: What did you do today not on your truck...
 
Our painter pressure washed the rental and cleaned up their mess. Your place is twice the size of our rental, and the paint wasn't that bad. I hope you find a lower estimate. I suspect the underside of those verandas are a big cost upper.

FleetsidePaul 07-14-2023 01:08 PM

Re: What did you do today not on your truck...
 
Quote:

Originally Posted by Steeveedee (Post 9219865)
I suspect the underside of those verandas are a big cost upper.

Good guess. The stucco isn't that much. It's just all the prep on the wood. I've got the biggest veranda you've ever seen... or at least that's what I told her. ;)

Okay I lied. It's not the biggest. But as WC Fields said "Anything worth having is worth cheating for' :lol: I love that line.

Stocker 07-14-2023 02:46 PM

Re: What did you do today not on your truck...
 
Quote:

Originally Posted by FleetsidePaul (Post 9219867)
But as WC Fields said "Anything worth having is worth cheating for' :lol: I love that line.

With a slight modification, Augustus McCrea (Robert Duvall) put that line to good use in "Lonesome Dove". :D

FleetsidePaul 07-14-2023 03:18 PM

Re: What did you do today not on your truck...
 
Quote:

Originally Posted by Stocker (Post 9219897)
With a slight modification, Augustus McCrea (Robert Duvall) put that line to good use in "Lonesome Dove". :D

With all due respect. WC Fields came first. Robert Duvall (Fine actor) was an itch in his daddy's pants when Fields did it. WC Fields was the best. He knew language and how to spin it and walk the tightrope of the censors. He was a funny guy.

Stocker 07-14-2023 04:26 PM

Re: What did you do today not on your truck...
 
Quote:

Originally Posted by FleetsidePaul (Post 9219915)
With all due respect. WC Fields came first. Robert Duvall (Fine actor) was an itch in his daddy's pants when Fields did it. WC Fields was the best. He knew language and how to spin it and walk the tightrope of the censors. He was a funny guy.

Oh, of course! I was not suggesting Duvall created the line -- only that he put it to good use. :)

dave6672 07-14-2023 05:00 PM

Re: What did you do today not on your truck...
 
1 Attachment(s)
Blew my mower apart to get out the drive shaft that needs bushings replaced.

Boog 07-14-2023 06:40 PM

Re: What did you do today not on your truck...
 
And of course, you're gonna do the right thing and LS it while you have it apart, right? ;)

tutone 07-14-2023 07:51 PM

Re: What did you do today not on your truck...
 
Today I worked on my 98 k1500. We went 200 miles to see the grandbaby. I took it cause the diesel is down. It ran fine on the way down and on the way back, 20 miles into the trip, itstarted cutting out under a load. A/C and a steep incline. This has happened before and it usually calls for a new cap and rotor. It was happenning at intervals of 30-40k miles but this time 10k.
So I babied it to I40 and jumped off at Dickson TN 150 miles from home. I asked for a new cap /rotor/ and I bought a little screwdriver set so if needed, I could change it on the way. But we made it home ok.
So today I pulled the new cap out and guess what, it was worse than the one on my truck. It was dirty and used. I called the parts store down there and they fixed it where I could swap it out locally.
The last time this happened, I was still working and we were on a 21 day 12 hr shutdown, so I took it to a reputable garage and they tuned it up.
When I went to tighten my cap, the ear on my distributor was cracked in the front. I made a bracket to clmp it in place until I can get a new one.
So if you guys buy new parts, open the box and take a look.
I was lucky that we made it home.

Gregski 07-14-2023 07:53 PM

Re: What did you do today not on your truck...
 
4 Attachment(s)
got some real werk done today !

Gregski 07-14-2023 07:54 PM

Re: What did you do today not on your truck...
 
3 Attachment(s)
where my GMC owners at

Gregski 07-14-2023 07:58 PM

Re: What did you do today not on your truck...
 
3 Attachment(s)
GMC's rule,
Cheby's drool !

Boog 07-14-2023 09:01 PM

Re: What did you do today not on your truck...
 
Oh, way too organized for a home build it shop. ;)

Getter-Done 07-14-2023 09:27 PM

Re: What did you do today not on your truck...
 
Quote:

Originally Posted by dave6672 (Post 9219947)
Blew my mower apart to get out the drive shaft that needs bushings replaced.

That mower look like the Cyclopes Cubs that I have.
I am putting a Frontend loader on One of them.

One of my (Way to) Many projects. ;)

Getter-Done 07-14-2023 09:31 PM

Re: What did you do today not on your truck...
 
Quote:

Originally Posted by tutone (Post 9220000)
Today I worked on my 98 k1500. We went 200 miles to see the grandbaby. I took it cause the diesel is down. It ran fine on the way down and on the way back, 20 miles into the trip, itstarted cutting out under a load. A/C and a steep incline. This has happened before and it usually calls for a new cap and rotor. It was happenning at intervals of 30-40k miles but this time 10k.
So I babied it to I40 and jumped off at Dickson TN 150 miles from home. I asked for a new cap /rotor/ and I bought a little screwdriver set so if needed, I could change it on the way. But we made it home ok.
So today I pulled the new cap out and guess what, it was worse than the one on my truck. It was dirty and used. I called the parts store down there and they fixed it where I could swap it out locally.
The last time this happened, I was still working and we were on a 21 day 12 hr shutdown, so I took it to a reputable garage and they tuned it up.
When I went to tighten my cap, the ear on my distributor was cracked in the front. I made a bracket to clmp it in place until I can get a new one.
So if you guys buy new parts, open the box and take a look.
I was lucky that we made it home.

Yeah
I agree:metal:
Check those parts:lol:

I keep a rotor button and a set of (Fan) belts under the seat:chevy::chevy:

Getter-Done 07-14-2023 09:37 PM

Re: What did you do today not on your truck...
 
Quote:

Originally Posted by Gregski (Post 9220004)
GMC's rule,
Cheby's drool !

Nice work on the cart.:metal:

special-K 07-14-2023 10:09 PM

Re: What did you do today not on your truck...
 
Quote:

Originally Posted by FleetsidePaul (Post 9219855)
I'm going to get some more estimates. But this place is 2800 Sq. Ft. and it's a single story ranch house, so it's looong. But the real kicker is the patio eaves and railing. It runs from stem to stern around the whole place and it hasn't been painted since Nixon was President. It's a crispy critter. It's going to take a lot of sandpaper and elbow grease. And I too am going with Dunn Edwards paint because it is really the best. It's worth the price.

These pic's are just one corner of the place. It just keeps going. But it gives you an idea of what I'm looking at.

http://67-72chevytrucks.com/gallery/...dium/Eaves.jpg

http://67-72chevytrucks.com/gallery/...um/Eaves_2.jpg

You can see the barn roof looks bad. But surprisingly it doesn't leak. It's still getting it replaced because it's wood shake and I'm in fire country. Not a good combination. I trimmed all the trees except that oak by my barn because it blocks my friendly :censored: neighbor. The tree guy laughed when I told him not to trim that one and why. :lol:

Are you going to put a metal roof on the barn?
I never heard of Dunn Edwards Paint. I see it's only available in the arid states. Won't it hold up to rain? :lol: It must have a special formula for dry heat resistance. I'm surprised there is still a regional paint company. in Maryland was Duron Paint and that was the best I ever used. Sherwinn Williams bought them up

Steeveedee 07-14-2023 10:42 PM

Re: What did you do today not on your truck...
 
Dunn-Edwards is good paint. We had our place painted 18 years ago and it's still going strong.

dieseldawg142 07-14-2023 10:52 PM

Re: What did you do today not on your truck...
 
2 Attachment(s)
my son lurned a good lesson today 'bout keeping his chrome clean.
we spent about 5 hrs polishing his rims....by hand...with some Mothers- no power, all manual elbow grease
Attachment 2278349Attachment 2278350

Gregski 07-15-2023 10:40 AM

Re: What did you do today not on your truck...
 
2 Attachment(s)
so I mounted these sexy hooks in the garage the other day, I just had to have 'em

and now I forgot what I'm supposed to hang on 'em

special-K 07-15-2023 11:33 AM

Re: What did you do today not on your truck...
 
It'll come to you. I like the GMC letter on the tool chest. So move that towel or whatever it is you slob!! :lol:

I put a GMC emblem, I think, from an early van on the cross box on my '72. It covers the bee holes left after removing the TSC emblem


All times are GMT -4. The time now is 12:02 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com