Re: PO has me PO'd
 

https://farm5.staticflickr.com/4445/...8c5aa663_c.jpg[url=https://flic.kr/p/ZnRj3W]20171014_105356

paper dolls and cut outs are over, now just mount the template to my 1/4" plywood and cut out and my spacer plate should be done

Re: PO has me PO'd
 

https://farm5.staticflickr.com/4469/...c2839ccd_c.jpg[url=https://flic.kr/p/Z6L4U9]20171016_111214

Re: PO has me PO'd
 

https://farm5.staticflickr.com/4500/...590e5e4c_c.jpg[url=https://flic.kr/p/CopucJ]20171016_110440[

I want to add a oil filled gauge to the engine compartment for first fire, found an adapter with a 1/8" port

parts s/b here thursday

Re: PO has me PO'd
 

https://farm5.staticflickr.com/4508/...36d997ea_c.jpg[url=https://flic.kr/p/ZaRiay]20171018_182000

https://farm5.staticflickr.com/4487/...00cb3d34_c.jpg[url=https://flic.kr/p/ZaRkym]20171018_182029

Re: PO has me PO'd
 

https://farm5.staticflickr.com/4447/...44af5082_c.jpg[url=https://flic.kr/p/CY6uUs]201711

achieved WOT on first try, but dropped a nut under plenum, still looking

been careful not to lose OEM throttle clip, but I did, now have to source one out

ordered cable adjusters from lokar, so I can install kick down cable

https://farm5.staticflickr.com/4459/...c3236db2_c.jpg[url=https://flic.kr/p/G8vqQa]20171102_113031

Re: PO has me PO'd
 

found it

https://farm5.staticflickr.com/4479/...1c7218a7_c.jpg[url=https://flic.kr/p/217gR7Z]20171103_103049

Re: PO has me PO'd
 

measure twice, drill once.....NOT

https://farm5.staticflickr.com/4530/...180824f6_c.jpg[url=https://flic.kr/p/21rZ1ru]20171114_115711

Re: PO has me PO'd
 

I still enjoy following along with every post Jim. It’s looking good.
Posted via Mobile Device

Re: PO has me PO'd
 

Thanks Chad for hanging on.

worked on the battery tray today

Re: PO has me PO'd
 

Maybe I will get mine done soon. I keep saying it will be done by Christmas. Its been 2 1/2 years. I dont lack much at this point. Doors and the interior.

Re: PO has me PO'd
 

I had good luck with Tri-plus doors, what do you have to do on the interior

Re: PO has me PO'd
 

https://farm5.staticflickr.com/4517/...146d3742_c.jpg[url=https://flic.kr/p/GDTo82]20171116_082202

https://farm5.staticflickr.com/4552/...70fcbcdf_c.jpg[url=https://flic.kr/p/Zvo8wJ]20171116_082112


Finished up the remote oil filter, aftermarket battery tray was warped when welded, made install a PITA. Keep the thread sealant off the first couple threads

Now I can install larger capacity oil filter

sure going to miss my tool tray, when I install my dual batteries. But, first I have to find and figure out the harness

Re: PO has me PO'd
 

Hoses were hitting inner wheel well, had to change in and out for clearance

https://farm5.staticflickr.com/4576/...ab1267dc_c.jpg[url=https://flic.kr/p/21Cxx1X]20171117_094835

Re: PO has me PO'd
 

https://farm5.staticflickr.com/4556/...929d7f76_c.jpg[url=https://flic.kr/p/ZiWMiz]20171118_110144

Re: PO has me PO'd
 

https://farm5.staticflickr.com/4584/...011098d5_c.jpg[url=https://flic.kr/p/21zQpEu]20171117_104736

Now I can re-install oil pan, since fittings are tight, needed clearance to swing the wrenches

Re: PO has me PO'd
 

https://farm5.staticflickr.com/4542/...957e9b42_c.jpg[url=https://flic.kr/p/DuPmS1]20171117_104633

Re: PO has me PO'd
 

I have everything done in the dash. I still need to install my roll bar, flooring and seats. I am going to line the floor first with FATMAT and then lay rubber flooring in rather than carpet. Once I am done with that, its just a few little things and then I will be ready for a test drive.

Re: PO has me PO'd
 

cool, keep us posted on progress, are you going to use an OEM rubber mat?

Re: PO has me PO'd
 

ok, so today I got the bright idea to mount my tins on the cylinder head. Plan to make a bridge off of the perimeter bolts( my vortec heads have center bolts and perimeter bolts) using hexagon stock

After some thought, I came up with trying my repro(GM) scripts. Seems like they will work as well

https://farm5.staticflickr.com/4545/...0edf1d00_c.jpg[url=https://flic.kr/p/21UVpvw]20171129_092226

https://farm5.staticflickr.com/4577/...5c5b2d42_c.jpg[url=https://flic.kr/p/21ZW4g6]20171129_102801

Re: PO has me PO'd
 

I found some sheathing that looks like original, and some shrink tubing with the same weave. Only, this stuff melts at a much lower temp. So, don't use a blow torch, when an alcohol lamp will do

https://farm5.staticflickr.com/4598/...5c4bf4c0_c.jpg[url=https://flic.kr/p/HzPpvr]20171215_093227

Re: PO has me PO'd
 

pin out crank and cam sensor


wire crank sensor function

a) 20ga. Lt. Green sensor power (5-12v)

b) 20ga. Yellow/Black sensor ground

c) 20ga. Blue/ White CKP signal

cam sensor

cavity function

a) sensor ground

b) CMP sensor signal

c) sensor power (5-12 volts)


crank sensor( fast)

a) black

b) red

Re: PO has me PO'd
 

Re: PO has me PO'd
 

Inspiring work Jim!

Re: PO has me PO'd
 

https://farm5.staticflickr.com/4601/...13d61569_c.jpg[url=https://flic.kr/p/DnbwAp]20171230_112323

Thanks, but at the moment, it's daunting.....trying to get my computers and cam & crank sensors to talk to one another, I can't find a yellow wire. As Vic says " I hate it, when it goes in one color, and comes out another"

Welcome aboard, this is the best forum around. No BS, just a bunch of Motorheads helping each other out

Re: PO has me PO'd
 

https://farm5.staticflickr.com/4701/...19225bae_c.jpg[url=https://flic.kr/p/JogKbk]20180109_100258

https://farm5.staticflickr.com/4647/...4c15f64d_c.jpg[url=https://flic.kr/p/23dX6UW]20180107_100745

https://farm5.staticflickr.com/4603/...6c04b76e_c.jpg[url=https://flic.kr/p/FfBYiU]20180111_124653

If you can read this...please turn me over!!!