![]() |
Re: Project Vitamin C-10
Nice progress Alan
|
Re: Project Vitamin C-10
That looks good Alan!!!:bann: I thought about doing the same for the door seals. When I got the new seals for my 64 GMC and found no metal core for the pinch weld I was less than imprested, I thought that I had purchased inferior parts then found it was just like the factory. I work fleet maintenance on military vehicles and the door seals used on MTVs, {a cab over truck used by the Army (a real POS) } would work perfect for our door seals. Now if I could just find where to get it on the civilian market. The profile of these seal is just the same as the factory used on our trucks but with the spring metal core for the pinch weld and the quality of the material just seems much better. I think it would really help control the wind noise these trucks are known for. If I can find where to get the stuff I will let everyone here know.
|
Re: Project Vitamin C-10
Quote:
Quote:
Quote:
|
Re: Project Vitamin C-10
Oh that sounds great:cf: thanks, I have a 71 but never looked at the door seal I will have to do that. One of these days I need to get working on that 71 as well, it is in the best condition of any un-restored 40 year old vehicle that I have ever seen. It started life as a motor home chassis and has a deluxe interior with buckets and factory tachometer. OH THE PADD:dig::haha:
|
Re: Project Vitamin C-10
Quote:
|
Re: Project Vitamin C-10
Quote:
Quote:
|
Re: Project Vitamin C-10
Thanks Shannon and BTW Semper-Fi
|
Re: Project Vitamin C-10
Did you find a speedometer cable grommet for the firewall? if not, pm me your address and ill send you one...I had one on my parts truck.
|
Re: Project Vitamin C-10
Quote:
Quote:
Quote:
|
Re: Project Vitamin C-10
Quote:
|
Re: Project Vitamin C-10
3 Attachment(s)
Alan, here is what I figured out for the summut radiator
Hose is a Gates 21620, application was 88 GMC Surburban 3/4 with AC, I cut one bend off the end and it fits good, I tried a few and this is the best I found, I am happy with it as I am not building a show truck...just a runner Here are a few pics of the hose |
Re: Project Vitamin C-10
Quote:
Rainy day in GA so I went to work and got some things done to the bed. First I stripped everything out except for the front and rear crossmember. Then made a cross bar for the front to stabilize it. http://i606.photobucket.com/albums/t...d/DSC04478.jpg http://i606.photobucket.com/albums/t...d/DSC04477.jpg I washed all the galvanized parts with this and a red scotch brite pad. http://i606.photobucket.com/albums/t...d/DSC04483.jpg Before http://i606.photobucket.com/albums/t...d/DSC04482.jpg After http://i606.photobucket.com/albums/t...d/DSC04485.jpg The spot welds had some raised areas around them. I hit them with a 50 grit roloc. http://i606.photobucket.com/albums/t...d/DSC04489.jpg http://i606.photobucket.com/albums/t...d/DSC04486.jpg Then squared off the fuel pocket and wiped it. http://i606.photobucket.com/albums/t...d/DSC04490.jpg It's getting close to another priming. I'm going to DP the galvanized parts and fill the spot welds to slick the T/G and header panel. I wanted to stay and get all of that done, but went home to the family. |
Re: Project Vitamin C-10
Looks much better squared off. :metal:
|
Re: Project Vitamin C-10
Quote:
I'm really confussed about my brake M/C. The truck had power brakes when I got it. http://i606.photobucket.com/albums/t...vytruck046.jpg Here is the wedge in question. Also does the rubber fit in the wedge or on the firewall? It really doesn't fit the firewall good because it is so thick. It fits the wedge really nice, but will it kit water from entering the cab? http://i606.photobucket.com/albums/t...s/DSC03667.jpg I have discussed this awhile back and back then I just decided to leave the wedge out. Because it looked weird and the rod would not connect to the pedal the way I thought it should. I'm back at it now trying to figure out the problem. I'm thinking someone added PB after the fact. Notice the wedge behind the M/C mounted on the firewall is pointed up (in pic above during teardown). In this pic it is supposed to be mounted like this which makes the MC point at an angle to the left side. Why does it mount like this pointing to the left side? http://i606.photobucket.com/albums/t...s/DSC03668.jpg With the wedge removed this is how much thread engagement I have in the rod end. http://i606.photobucket.com/albums/t...s/DSC03673.jpg With the wedge installed it doesn't adjust out far enough for a drop fit in the pedal. The pic shows it at one thread engagement. I believe the pedal should rest against the rubber stop (can be seen in pic). Isn't that right? http://i606.photobucket.com/albums/t...s/DSC03677.jpg I like the angle here with the wedge installed pointing up. With it in this position the brake lines will need some tweaking. Without wedge it points straight off the firewall. http://i606.photobucket.com/albums/t...s/DSC03679.jpg My choices are: Without wedge drill 2 new holes in firewall and call it done. (My vote) With wedge lengthen rod, tweak brake lines. |
Re: Project Vitamin C-10
looks like you have a 68-72 booster and a mounting wedge for 60-66 trucks with power brakes
when I ran the 67-72 booster I ran it without the wedge and just bolted it to the firewall, I have since removed the 67-72 booster and added a captain fab bracket and 1988-98 booster, I never liked the idea of the booster mounted to just the firewall and not the re enforcing meant to carry the load of the brakes |
Re: Project Vitamin C-10
Quote:
|
Re: Project Vitamin C-10
Quote:
Ours is mounted like that on the wife's '66. I believe it kicks to the left for valve cover clearance with a v-8. I believe there were 2 options for these, a vertical and a horizontal bracket. All I can figure is that you have the wrong linkage. |
Re: Project Vitamin C-10
2 Attachment(s)
Quote:
Quote:
Quote:
Here is a 72 booster setup |
Re: Project Vitamin C-10
Dang-it Alan I see you are starting another project for 198plus this is great for you:metal: but you got so much going on how am I going to keep up and still get anything done here??? What I am saying is you may not realize it but have achieved your dream of being a teacher. Maybe I am not a good student but man I can’t keep up :haha:
No but seriously I have learned a lot from this sight and much of it from you every one here is great as I get ready to start on my new 64 and get back in to finishing my others I cant help but to think about how much help this sight and it’s members are thanks to you all this place rocks:5150:. Ok I will stop now and I suggest the rest of you do the same or Alan’s head will be so big it will no longer fit through the shop door and he will no longer be able to work on his killer projects. :haha: |
Re: Project Vitamin C-10
1 Attachment(s)
are you sure thats a 72 set up? here is the one I ran on my 62 for 15 years and I pulled it from a one owner stock 71 , the same truck I got my rear end and front brakes from, here is a pic of the booster, I can take more if I can dig the booster up, its in the garage somewhere
Quote:
|
Re: Project Vitamin C-10
Just an idea, but there is a write up in the new Car Craft about using a junkyard Hydroboost out of a newer Astro van. They installed it in a '67 Chevelle, and it looked like a pretty easy swap.
|
Re: Project Vitamin C-10
Alan, i like this idea for the seal.
Quote:
|
Re: Project Vitamin C-10
Quote:
You making fun of the size of my head? :haha: It's big enough already, not from swelling from pride. I was born with it. ;) Thanks for the inspirational comments. I wish I could move as fast others at getting a project done in no time. It's been fun for the most part so far. Quote:
Quote:
No progress updates. "Draggin' butt" has set in. :lol: |
Re: Project Vitamin C-10
Quote:
|
Re: Project Vitamin C-10
3 Attachment(s)
Got a little painting done. I didn't put enough hardener in it apparently. Because it was slow to dry. I used the right reducer just got cross-eyed looking at the measuring lines. I brought the parts home just in case I get some time this weekend. I painted the M/C, vent window frames, condensor brackets and front shrouds. The shrounds didn't turn out good, i ran the heck out of one of them. I should have laid them down, but I didn't. (I only painted the top of the shrouds.) Some day I will learn. :lol: Maybe. ;)
|
All times are GMT -4. The time now is 08:43 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com