The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   General Discussion (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=15)
-   -   What did you do today not on your truck... (https://67-72chevytrucks.com/vboard/showthread.php?t=810698)

72c20customcamper 07-28-2023 08:59 AM

Re: What did you do today not on your truck...
 
Quote:

Originally Posted by Steeveedee (Post 9223409)
Watched the roofers tear into my old roof. Lots of stuff needs replacement. Going to have to tent for termites. :( At least we can stay in the motorhome, parked out front for a day or so.

Termites are the worst . I had a small problem with them they sprayed the area and then put in bait stations . I refilled them twice and after about 3 months no bait was taken but the stations are still in the ground .

yuccales 07-28-2023 10:21 PM

Re: What did you do today not on your truck...
 
2 Attachment(s)
Covered this knob up for the last time. ;)

Boog 07-29-2023 06:43 AM

Re: What did you do today not on your truck...
 
Due to the current heat I didn't do anything. I was going out there working on the outboard motor and boat but now, well, it's not going anywhere any time soon so no rush.
Speaking of outboard motor, I did myself a favor and converted my motor to electric start and charge. I don't use the rig often but it is getting increasingly difficult for me to pull start it. It's cooler than the other side of the pillow now. :lol:

yuccales 07-29-2023 11:01 AM

Re: What did you do today not on your truck...
 
1 Attachment(s)
Quote:

Originally Posted by Boog (Post 9223751)
Due to the current heat I didn't do anything.

I'm on a self imposed work slow down today. The heat and my house work has caught up with me. Will get washer/dryer off the porch and back into the laundry room, and some other small things. The siding can wait till tomorrow. ;)

Steeveedee 07-29-2023 11:20 AM

Re: What did you do today not on your truck...
 
Watched roofers skin off the old roof and repair some dry rot. "Supervised" the delivery and placement of the new underlayment and shingles onto the roof. Boy, were those delivery guys grumpy, bordering on belligerent. After 5 PM on a hot hot Friday would be a good excuse, I guess. ;)

yuccales 07-29-2023 11:30 AM

Re: What did you do today not on your truck...
 
Quote:

Originally Posted by Steeveedee (Post 9223788)
After 5 PM on a hot hot Friday would be a good excuse, I guess. ;)

You got that right!

FleetsidePaul 07-29-2023 08:16 PM

Re: What did you do today not on your truck...
 
Quote:

Originally Posted by Steeveedee (Post 9223788)
Watched roofers skin off the old roof and repair some dry rot. "Supervised" the delivery and placement of the new underlayment and shingles onto the roof. Boy, were those delivery guys grumpy, bordering on belligerent. After 5 PM on a hot hot Friday would be a good excuse, I guess. ;)

Working in this heat is murder. I've done it and can't say that I liked it. After 5 pm you probably wouldn't want to be around me either.

My Fedex guy is usually nice and chatty. This last delivery not so much. It was 107 degrees and he looked miserable.

68bowtie 07-29-2023 09:56 PM

Re: What did you do today not on your truck...
 
It’s hard to do anything in the garage these days. Even at only 97-deg, no thanks.

LockDoc 07-30-2023 12:07 AM

Re: What did you do today not on your truck...
 
-
I go out in the morning and inside by about 1pm. It was 98º yesterday with a heat index of 105º. Nice 88º today with a decent breeze. I can handle that.

LockDoc

68bowtie 07-30-2023 12:38 AM

Re: What did you do today not on your truck...
 
The first 90-deg day in early summer feels pretty hot. But after a few weeks straight of 105-113, 95 feels AMAZING…

Palf70Step 07-30-2023 06:46 AM

Re: What did you do today not on your truck...
 
Quote:

Originally Posted by LockDoc (Post 9223983)
-
I go out in the morning and inside by about 1pm. It was 98º yesterday with a heat index of 105º. Nice 88º today with a decent breeze. I can handle that.

LockDoc

That's about the same for me. The heat and humidity in the ole metal build are getting tough on this old yankee body.

72c20customcamper 07-30-2023 08:24 AM

Re: What did you do today not on your truck...
 
Crisp 54 degrees this morning . Have had heat advisories the last 4 days . 54 feels wonderful

Steeveedee 07-30-2023 09:00 AM

Re: What did you do today not on your truck...
 
FEDEX Ground allegedly delivered my new grille from LMC at 10:17 PM yesterday. I say allegedly because I have video cameras up, and there isn't even an indication of a vehicle driving on the street, as they pick up the reflection of the headlights off of things at the very least. Let alone someone in the driveway. Drove around the neighborhood looking to see if it was simply mis-delivered, but didn't see it. :cuss: I'm going to post a request on our HOA FaceBook page to see if anyone else has video.

FleetsidePaul 07-30-2023 09:44 AM

Re: What did you do today not on your truck...
 
Quote:

Originally Posted by Steeveedee (Post 9224121)
FEDEX Ground allegedly delivered my new grille from LMC at 10:17 PM yesterday. I say allegedly because I have video cameras up, and there isn't even an indication of a vehicle driving on the street, as they pick up the reflection of the headlights off of things at the very least. Let alone someone in the driveway. Drove around the neighborhood looking to see if it was simply mis-delivered, but didn't see it. :cuss: I'm going to post a request on our HOA FaceBook page to see if anyone else has video.

FWIW I've had the same thing happen and it shows up a day later. Creative accounting on the drivers part??

Steeveedee 07-30-2023 10:56 AM

Re: What did you do today not on your truck...
 
That may well be...but there was a picture taken of the package leaning against a garage wall...but it's not my garage. Our HOA is architecturally different from the rest of the houses on either side. I realized that when I was out trolling for the box. I have a claim in with FEDEX already.

best view 07-30-2023 11:02 AM

Re: What did you do today not on your truck...
 
Good luck they deliver my neighbors packages to my house constantly when I confront them with my house number difference they say they don’t look for numbers they have this hand held device that pings them some technology suc.s

farmall 07-30-2023 11:35 AM

Re: What did you do today not on your truck...
 
Quote:

Originally Posted by yuccales (Post 9223787)
I'm on a self imposed work slow down today. The heat and my house work has caught up with me. Will get washer/dryer off the porch and back into the laundry room, and some other small things. The siding can wait till tomorrow. ;)

Is that a lawn chair made out of an AG implement in your pic?
If so, can you snap a pic of that?

72c20customcamper 07-30-2023 12:48 PM

Re: What did you do today not on your truck...
 
2 Attachment(s)
Quote:

Originally Posted by yuccales (Post 9223718)
Covered this knob up for the last time. ;)

I have a few of those in my barn

yuccales 07-30-2023 03:50 PM

Re: What did you do today not on your truck...
 
2 Attachment(s)
Quote:

Originally Posted by farmall (Post 9224157)
Is that a lawn chair made out of an AG implement in your pic?
If so, can you snap a pic of that?

Kinda sorta. ;) The wheels and axle were from a John Deere baling machine that I saved from the cutting torch 40 years ago. I was given 16 cultivator wheels that were being used to break up ice in a parking lot, also considered scrap! The bench part is a piece of metal fence. The bench is not welded to the axle nor are the discs. Did not want to really mess with the axle. If we want it to recline further, just step on the discs to press them deeper in the dirt. :lol:

FleetsidePaul 07-31-2023 01:50 AM

Re: What did you do today not on your truck...
 
I kinda felt my age today. I applied for Social Security a while back and they finally set me up with a phone appointment. In September. :mad: Funny how when they took that money out of my paycheck for decades there was no delay. But when I want some back then I need to take a number. No hurry. :bs:

But this conformation letter cracked me up. The font is huge. I guess that they know their audience. Old people.

I put the conformation for my wife's cruise to Mexico next to it for comparison.
I'm not going to Mexico. :ito: No way am I going to be stuck on some floating septic tank with my wife and her friends. All the husbands said no so I didn't catch too much heat over that. Power in numbers. :metal:

http://67-72chevytrucks.com/gallery/...edium/Font.jpg

Lost in the 60's 07-31-2023 09:00 AM

Re: What did you do today not on your truck...
 
It's been another unseasonably hot and dry summer up here too. Way behind on rain and in another drought year.
My previous shop was built into a hillside with 3 sides 80% below grade and heavily wooded old growth trees for shade. The roof was a light beige color as well. The shop area was well insulated and even in 90 degree temps, it stayed 72 degrees inside, as long as I kept the doors shut.
My "new" place, the shop building has a dark green roof and receives direct sun most of the day. It gets mid to upper 80's in there, even being heavily insulated now. I gave up trying to work in there in that heat and ordered a mini-split A/C system, but who knows when I will get that installed. It's too damned hot to work on that too..:lol:

Steeveedee 07-31-2023 11:58 AM

Re: What did you do today not on your truck...
 
Quote:

Originally Posted by best view (Post 9224147)
Good luck they deliver my neighbors packages to my house constantly when I confront them with my house number difference they say they don’t look for numbers they have this hand held device that pings them some technology suc.s

Turns out it was at my neighbor's house. If it had been in front of the garage like the delivery person said, we'd've seen it. It was behind a pillar with lots of plants blocking the view, next to his front door. That's quite a ways from the front of the garage.

72c20customcamper 07-31-2023 01:24 PM

Re: What did you do today not on your truck...
 
2 Attachment(s)
Got the bed up into my Dodge . I would have left it on the trailer but my plan is to tow the 68 to Carlisle it’s a process whomever buys it will need a few guys or pay the forklift guy to get it off .

Steeveedee 07-31-2023 02:06 PM

Re: What did you do today not on your truck...
 
My elderly (older than I, anyway) next-door neighbor came over this morning and asked if I had bought a grill for a Chevrolet truck. He thought that someone had sent him a present (didn't read the label :rolleyes: ). A friend of his looked at it and told him it belonged at my house. It was on his porch, behind a pillar that is covered with ivy. No way to see that from the street. Well, it's here, it's shiny, and undented. Time to start putting hardware on it. :)

FleetsidePaul 07-31-2023 04:44 PM

Re: What did you do today not on your truck...
 
Quote:

Originally Posted by Steeveedee (Post 9224803)
My elderly (older than I, anyway) :)

That guy must be pretty old. :lol:

Ol Blue K20 07-31-2023 04:51 PM

Re: What did you do today not on your truck...
 
Quote:

Originally Posted by FleetsidePaul (Post 9224890)
That guy must be pretty old. :lol:

:lol::lol:

Steeveedee 07-31-2023 05:46 PM

Re: What did you do today not on your truck...
 
What!? I can't hear you. The hinges on my coffin lid are squeaking too loud! :P

Getter-Done 07-31-2023 09:22 PM

Re: What did you do today not on your truck...
 
Quote:

Originally Posted by Steeveedee (Post 9224917)
What!? I can't hear you. The hinges on my coffin lid are squeaking too loud! :P

You should see 72 tigger 's that He has built.

I like It. :metal:

Maybe He will see this and share the picture;)

:chevy::chevy:

Steeveedee 07-31-2023 11:05 PM

Re: What did you do today not on your truck...
 
:lol: Pretty sure I've seen it. Truth is, when I'm dead my ashes would just make a "poofing" noise, though I'm considering having my body buried for a tree to grow out of. But then, who needs another crab apple tree? :D

yuccales 07-31-2023 11:22 PM

Re: What did you do today not on your truck...
 
1 Attachment(s)
One of the coolest things on this forum I've seen! ;)

farmall 08-01-2023 12:16 AM

Re: What did you do today not on your truck...
 
Quote:

Originally Posted by yuccales (Post 9224301)
Kinda sorta. ;) The wheels and axle were from a John Deere baling machine that I saved from the cutting torch 40 years ago. I was given 16 cultivator wheels that were being used to break up ice in a parking lot, also considered scrap! The bench part is a piece of metal fence. The bench is not welded to the axle nor are the discs. Did not want to really mess with the axle. If we want it to recline further, just step on the discs to press them deeper in the dirt. :lol:

I am going to keep my eye out for something to modify. I think that would sell up here.
Thanks for the pics.

Getter-Done 08-01-2023 05:56 AM

Re: What did you do today not on your truck...
 
Quote:

Originally Posted by Steeveedee (Post 9225094)
:lol: Pretty sure I've seen it. Truth is, when I'm dead my ashes would just make a "poofing" noise, though I'm considering having my body buried for a tree to grow out of. But then, who needs another crab apple tree? :D

:haha::haha::haha:
Quote:

Originally Posted by yuccales (Post 9225100)
One of the coolest things on this forum I've seen! ;)


Yep that it.:chevy::chevy::chevy:

FleetsidePaul 08-01-2023 12:22 PM

Re: What did you do today not on your truck...
 
Quote:

Originally Posted by yuccales (Post 9225100)
One of the coolest things on this forum I've seen! ;)

That sure would look good in the back of my hearse.

Boog 08-01-2023 01:02 PM

Re: What did you do today not on your truck...
 
It looks more like a bench to me fellas.

special-K 08-02-2023 07:09 AM

Re: What did you do today not on your truck...
 
Quote:

Originally Posted by 72c20customcamper (Post 9224796)
Got the bed up into my Dodge . I would have left it on the trailer but my plan is to tow the 68 to Carlisle it’s a process whomever buys it will need a few guys or pay the forklift guy to get it off .

Something tells me you thought that out first. Been there, done that. One of my favorite sayings is "If there's a wheel, there's a way". Comes from doing whatever needs done concerning vehicles in a one man show

yuccales 08-02-2023 09:43 PM

Re: What did you do today not on your truck...
 
Quote:

Originally Posted by Boog (Post 9225396)
It looks more like a bench to me fellas.

Until that day you become permanently horizontal. :lol:

mr.mud1 08-05-2023 03:19 PM

Re: What did you do today not on your truck...
 
1 Attachment(s)
i decided it was time for the old 67 wagoon to get a little TLC.the pinion seal is leaking,oil,filter needed done and lube the 400 grease fitting in the chassis(not really 400 but lots more than today with cars with none)the gas gauge stopped working,traced that to a bad ground,all good now,new seal on monday and she'll be ready to roll.

72c20customcamper 08-10-2023 06:55 PM

Re: What did you do today not on your truck...
 
3 Attachment(s)
Looked at another one .looks to be a Real k10 by the vin wasn’t able to open the door so I couldn’t check the tag or spid , bed looks to have come off a 3/4 ton as it has the 3/4 ton tire mount and fender . Truck is a standard transmission and factory air

Steeveedee 08-10-2023 07:29 PM

Re: What did you do today not on your truck...
 
Nice looking rig, and AC is always nice (though that one needs a bit of work).

I spent some time converting over to a better fence for my table. Going to buy some metal tomorrow to finish up the adapters. Converting from the factory "infinitely adjustable" fence to an Incra fence that is repeatable any time to a high degree of precision.

72c20customcamper 08-10-2023 07:48 PM

Re: What did you do today not on your truck...
 
Quote:

Originally Posted by Steeveedee (Post 9228787)
Nice looking rig, and AC is always nice (though that one needs a bit of work).

I spent some time converting over to a better fence for my table. Going to buy some metal tomorrow to finish up the adapters. Converting from the factory "infinitely adjustable" fence to an Incra fence that is repeatable any time to a high degree of precision.

Really don’t want another stepper and I just sold the fleet side bed I had at Carlisle . It’s always the way ain’t it have something around a couple years sell and then need it


All times are GMT -4. The time now is 01:14 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com