Re: PO has me PO'd
 

https://farm2.staticflickr.com/1781/...ff82f127_c.jpg[url=https://flic.kr/p/26vce8U]20180718_102107

Weii, it's not 1/4-20

Re: PO has me PO'd
 

I’ll be home Friday and get one of mine out will see what it is .....memory says pan head philips

Re: PO has me PO'd
 

Jim
They are 1/4" pan head sheet metal screws 1/2" long.

Richard

Re: PO has me PO'd
 

good answers guys, good thing i didn't try to thread that 1/4-20 in. Now on the hunt for screws. OK, found some, at least I have a sample.

Thanks for the direction and time Guys. May have to post up a WTB in the classifieds or Fastenal

good memory Jess

Re: PO has me PO'd
 

Jim
I have a few extras if you need 2. Pm me your address and I will get them out tomorrow

Richard

Re: PO has me PO'd
 

Not sure as the bracket has welded nuts on it, that would mount the bracket thru dash, these may be machine screws

https://farm1.staticflickr.com/920/4...658a7028_c.jpg[url=https://flic.kr/p/29cyP9J]20180718_204220

Re: PO has me PO'd
 

Correct two of them that go thru the dash panel should be 1/4 20 and the two that are not threaded will be what I posted above.

Let me go get a picture of the complete unit

Re: PO has me PO'd
 

here are a couple pictures

.

Re: PO has me PO'd
 

https://farm2.staticflickr.com/1767/...5c786bfc_c.jpg[url=https://flic.kr/p/29hCAZK]20180719_091541

Thanks Richard for the offer of parts over the years, you have been a great help. bolts and screws should be here, but it's been 20 years since I took it apart

Chased the threads, and 1/4-20 seems to work. Of course, the PO used the wrong screw driver and screwed up the head

Found 1 screw, may have to hit you up for 1 screw

Re: PO has me PO'd
 

knew it had to be in one of six

https://farm1.staticflickr.com/930/4...b232c731_c.jpg[url=https://flic.kr/p/26x3PLY]20180719_112800

now for install

Re: PO has me PO'd
 

https://farm1.staticflickr.com/845/4...044b4653_c.jpg[url=https://flic.kr/p/27V3p8V]20180719_131257

Re: PO has me PO'd
 

https://farm2.staticflickr.com/1795/...839e893b_c.jpg[url=https://flic.kr/p/L7au3p]20180806_113815

https://farm2.staticflickr.com/1832/...85d92c94_c.jpg[url=https://flic.kr/p/28LEqVW]20180806_113844

Started to work on the FAST harnesses again, while some of the leads need to be used, not all of the XIM, the harness leads for the XFI are used while some of the XIM are duplicated( such as the MAP), but there may be more, as I hook this up
1 of the leads that are coming out of the XFI harness is for the crank sensor, that I won't be using, was told by FAST to just ignore or cut off, since my XIM harness has the leads for crank and cam sensors from my EFI parts, I've changed the connections so I can plug in directly to the 2 sensors

Now to hole saw(1 1/4") into my firewall, going to slice grommet and super glue back together, don't feel like depinning all the connecters to get it through grommet

Connections I am working on now;

DS and PS coil driver

Cam/ hall effects

Cam and Crank sensors

ground(-)

Re: PO has me PO'd
 

With all the time and effort you're spending on this, that harness from FAST is cheap looking. Consider replacing that convoluted tubing with some braided sleeving from Wirecare Just a thought.

Re: PO has me PO'd
 

AJ, I agree with you 100%, but this was my last attempt to resolve the issue

https://farm5.staticflickr.com/4618/...2e0bb555_c.jpg[url=https://flic.kr/p/FPtFum]20180131_093349

Needless to say, after two new harness's, I'm taking baby steps....

I have the wrap you are referring too

Post #2901 was a debacle

Re: PO has me PO'd
 

Milestone of sorts....Shifter cart is running, will post up pics as soon as I can get them off of my Iphone, maybe some track time before winter flys

Re: PO has me PO'd
 

https://farm2.staticflickr.com/1951/...d33d038d_c.jpg[url=https://flic.kr/p/2ceMUgf]20181022_104141

https://farm2.staticflickr.com/1917/...be29f929_c.jpg[url=https://flic.kr/p/2cjgM5a]20181022_101915

https://farm2.staticflickr.com/1967/...116a2b2b_c.jpg[url=https://flic.kr/p/2aVwsqX]20181022_101709[

Re: PO has me PO'd
 

Jim
You got way more patience than I do. Looks like you moving right along though
Richard

Re: PO has me PO'd
 

https://farm2.staticflickr.com/1916/...e7c8bdc0_c.jpg[url=https://flic.kr/p/2bdwtRu]20181022_132509

This pic shows where to insert tool, locking tab is at 12 o'clock, but only have insert about 1/8" to engage lock, then rock tool up and down. then install tool at 6 o'clock to remove wire

Re: PO has me PO'd
 

You made me chuckle, just can't get all the connecters through the size hole that's needed for the firewall grommet, don't know why they wouldn't put the grommet on the harness before the connecters

This the beginning of my build season

Have to go back and edit the pics for slplanng

Re: PO has me PO'd
 

https://farm2.staticflickr.com/1964/...7585b57d_c.jpg[url=https://flic.kr/p/29zRZJo]20181023_105308[

https://farm2.staticflickr.com/1952/...42b4e794_c.jpg[url=https://flic.kr/p/2b1rGjZ]20181025_094122

The tape wants to roll, memory. Found this gold plated tool in her toolbox( she passsed several months ago). A note hand written by her said "tools go to Jim" and her retirement clock. tools were gold plated when she retired from CPPC. She was the only woman in the engineering dept.. And her job was to repair broken wires the size of your hair. Company built guidance controls for the Apollo moon shot

https://farm2.staticflickr.com/1946/...750af10b_c.jpg[url=https://flic.kr/p/2b1sL5H]20181025_095736

Re: PO has me PO'd
 

https://farm2.staticflickr.com/1955/...ed7c02cc_c.jpg[url=https://flic.kr/p/QjdAd1]20181027_115106

https://farm2.staticflickr.com/1957/...87b832ac_c.jpg[url=https://flic.kr/p/2bm2Ak1]20181027_121149

https://farm2.staticflickr.com/1949/...f12196ea_c.jpg[url=https://flic.kr/p/2bm14X9]20181027_115223

Re: PO has me PO'd
 

Date coded '67


https://farm2.staticflickr.com/1911/...b17a4f7c_c.jpg[url=https://flic.kr/p/2cv93Sx]20181029_120152

Now I have to find some red and clear lenses

Re: PO has me PO'd
 

Cam/ Hall effect

https://farm2.staticflickr.com/1925/...97b28715_c.jpg[url=https://flic.kr/p/2cv6UWh]20181101_133758

https://farm2.staticflickr.com/1976/...fd25cb69_c.jpg[url=https://flic.kr/p/2bbLmP8]20181101_133725

https://farm2.staticflickr.com/1937/...b35e2614_c.jpg[url=https://flic.kr/p/NPizUg]20181101_132518

Re: PO has me PO'd
 

This is where it can be confusing, as the connectors look the same, but, there is a notch on the left one at the top and will not let them connect

I use my hemastats to keep the locking tabs from reengaging as you pry off on side
https://farm2.staticflickr.com/1939/...7e693741_c.jpg[url=https://flic.kr/p/2cAMx5k]20181102_113902

https://farm5.staticflickr.com/4838/...9b0e929d_c.jpg[url=https://flic.kr/p/2bd3ceZ]20181102_120842

you can see better the notch I am referring to in this pic

These are the cam and crank senser connectors

Started to install some of the wire care wrap, but didn't use tape to finish yet. I guess AJ was right, doesn't look as cheap

Re: PO has me PO'd
 

You know it!