Re: How about some pics of Static dropped 60-66
 

Sorry I've been slacking on this truck. It's my little brother's truck and I have a bad habit of working on paying customers stuff first.
I'm machining the lower control arm shafts for more caster and hope to have the front done in a couple of weeks. I'm gonna start a build thread on it then. Stay tuned.

Re: How about some pics of Static dropped 60-66
 

Here is mine. 5" CPP drop springs in the rear. 3" CPP drop springs in the front that have been cut down 'a little'...

I'm actually in the process of going thru the front suspension with drop spindles to improve the suspension geometry. Ball joints look like the buttons on a fat man's coat!:lol:

http://i41.photobucket.com/albums/e2...Y/DSCN4323.jpg

Re: How about some pics of Static dropped 60-66
 

LDO, looks great! What is your wheel/tire combo?
Posted via Mobile Device

Re: How about some pics of Static dropped 60-66
 

17x7 on 225/60-17s in the front, 18x8 on 255/55-18s in the rear.

I love the look and it actually rides pretty good.

Re: How about some pics of Static dropped 60-66
 

LDO, looks effing sick!luv it

Re: How about some pics of Static dropped 60-66
 

Nice truck LDO!

Re: How about some pics of Static dropped 60-66
 

Thanks everyone. Gotta re do the front suspension and it has been a pain figuring what parts to use but this forum and its members have been a big help.
Posted via Mobile Device

Re: How about some pics of Static dropped 60-66
 

Very Nice :metal:

Re: How about some pics of Static dropped 60-66
 

My 1965 C10 static dropped. 2 coils off the front. 4" blocks and 1 coil off the rear. About to be bagged in a couple of months. Stuff is in the mail.

Re: How about some pics of Static dropped 60-66
 

That looks nice pelt! What size tire you running?
Posted via Mobile Device

Re: How about some pics of Static dropped 60-66
 

Thanks, I'm running p235/75r15. My buddy jusspassnthru is running a smaller tire and it looks lower but I like the bigger tire.

Re: How about some pics of Static dropped 60-66
 

I've also added the custom cab trim piece and dog dish poverty caps since this was taken. I have a few more pictures in my gallery.

Re: How about some pics of Static dropped 60-66
 

what suspension are you running? That sits really nice

Re: How about some pics of Static dropped 60-66
 

found my springs not sitting in the front pockets right. they are now..

http://i6.photobucket.com/albums/y23...3C61D555E0.jpg

4-6 drop, parts from Scott Hot Rod Shop.

Re: How about some pics of Static dropped 60-66
 

4 in drop Leaf spring and 2 in drop shackle rear, 2.5 spin and 1 inch springs front. Going to a 2 in front spring soon.
http://imageshack.us/a/img96/2604/20130110152107.jpg

Re: How about some pics of Static dropped 60-66
 

Hey, I got a 64 GMC w/ rear leafs. I'm kinda new here, where did you get lowered leafs or are the garage built? Or does anyone know of a flip kit for the rear? Any info would be appreciated, thanks.

Re: How about some pics of Static dropped 60-66
 

A "flip kit" is used to raise a leaf sprung truck.
(shackle flip is a 4X4 term)
There are drop shackle kits available that are essentially longer shackles for the back of the spring.
Drop leaves are also available and between the two you can drop the rear of the frame to the point of needing a "C-notch" on the frame.
:banghead:
HOWEVER... "C_notching" a leaf sprung frame is HIGHLY inadvisable since the back of the leaf sprung frame is an integral part of the structure of the suspension while a coil sprung frame is not....
:gmc2:
Many people don't know that 63-66 GMC were not sold from the factory with coil sprung rear suspension so almost everything available for the 63-66 trucks is for the coil rear suspension.

You could swap to a Chevy frame but that is quite a bit of work, but then you would have the coil/trailing arm suspension that tons of stuff is available for. :metal:
Hope this helps.
:5150:

Re: How about some pics of Static dropped 60-66
 

chopboogie - not aware of a "bolt on flip kit" for the 64 but cutting and extending the rear shackles would get you a couple inches lower...

I'll have to dig around for a pic I had on the flip kit for the later leaf spring trucks (73-87) cause I think it would be doable to fab something similar for your truck.

Seems a flip and losing some leafs with a frame notch will get you down on the back end.

I'm doing a 4" coil spring / 2" block drop on my 62 C10 with a notch. 3" coils and 2 1/2" drop spindles on the front.

I have to wonder when it becomes necessary to raise the bed floors & tubs within the fleetside bed box?

keep us posted...

FOUND the pic
bob

Re: How about some pics of Static dropped 60-66
 

All cleaned up!
Posted via Mobile Device

Re: How about some pics of Static dropped 60-66
 

Beautiful truck Steve. What tire size and drop?
Posted via Mobile Device

Re: How about some pics of Static dropped 60-66
 

Coker 235/70/15, cragar 15x8, cpp 3 inch front drop springs, 5 inch rear. Just got the cpp disc upgrade and drop spindles, probably going to throw a 1" or 2" block out back.
Posted via Mobile Device

Re: How about some pics of Static dropped 60-66
 

Thanks, I have the same CPP kit and will buy the spindles soon also. I look forward to seeing yours done. Great tire size.
Posted via Mobile Device

Re: How about some pics of Static dropped 60-66
 

The quickest way to take 4" off your ride height would be to put your axel on top of your springs rather than under them.
Check with CaptainFab on this forum. He has supplied several special suspension and steering pieces to friends of mine and everything was top notch quality.
If this is what all of you kids are calling a flip kit.. captainfab can probably help you out.
:5150:

Re: How about some pics of Static dropped 60-66
 

Thanks 66-PMD-GMC,
THat's what I was thinking about when I asked about a flip kit, to flip the axle above the leaf springs. I've seen them for late model trucks just not earlier trucks. I'll look up CaptainFab and check him out.
Chopboogie

Re: How about some pics of Static dropped 60-66
 

Thanks robber grin,
I'll look at this option, I'm comfortable with some minor fab work, body work scares me. It will be a couple months before I have anything to post. I hope to get started then when the weather breaks a little. I got a 4 month old plus 2 other kids, trying to keep them and mama happy leaves just a little time to play in the shop.
Chopboogie