Re: 49 ls1
 

I also filled the firewall hole I cut out to mock up the column. And did some rust repair to the drivers side A pillar. Next on the list is repairing that dvr side cab corner, welding in the dash, and building some bracketry for that Fulton visor.

Re: 49 ls1
 

Chris, bracket looks good. Never seen a door pillar rust in those areas, but there's a lot I haven't seen...Jim

Re: 49 ls1
 

cool cool, yeah I went with the newport from classic parts USA made one for like 200 I think, little steep but I didn't wanna dicker with anymore and that was the last main thing my truck needed when I finished it. I am however gonna maybe try some of the way less expensive motors you see out there, just fab up a bracket and see if I don't destroy something. $200 just to have a 2 speed wiper is a bit steep, but I wanted to support something usa made, the china one is 160. Looking good.

Re: 49 ls1
 

Thanks guys, This truck had a hole cut in the center of the roof, right above the windshield (I assume for an antenna). I'm sure that it allowed water and debris to run down the channels and settle on top of the upper door hinge. I found a lot of debris behind the metal when I cut out the rust.

Bear Claw latches and plates got here today, unfortunately I was sent a set of "small" latches instead of the large ones I ordered. Got it fixed, but I have to wait for the correct ones to get here.

Re: 49 ls1
 

New T-Shirts are in! If anyone would like one, please PM me.

Re: 49 ls1
 

Got some work done on the dash tonight. Got the new Pro-Line vents and AC control panel from Vintage installed.

Re: 49 ls1
 

I had to get a little creative with the AC controls. I wound up cutting out the ashtray support, and building some framing behind it. I think it turned out kind of nice though.

Re: 49 ls1
 

I also welded in the delete panel on the other side of the radio, and slapped a little bit of dyna-hair over it. Next I have bear claw latches and one more cab corner to install.

Re: 49 ls1
 

Looking good Chris...Jim

Re: 49 ls1
 

looks cool, nice and subtle.

Re: 49 ls1
 

Thanks guys. I want it not to look too custom, just at second glance. That is the idea anyway.

Re: 49 ls1
 

Got some work done on the 49 today (waiting on parts for a customer car). Dashboard is all welded in.

Re: 49 ls1
 

I also installed my new large bear claw latches, and worked on door gaps. Got them fitting pretty good, need some tweaking on the forward edges still.

Re: 49 ls1
 

More pics.

Re: 49 ls1
 

Great work fixing those gaps. That looks like a crazy amount of work.

Re: 49 ls1
 

Thanks Josh. Those damned doors never fit right. Always finding the happy medium, then fixing the frame to match.

Re: 49 ls1
 

Taking shape Chris, nice job...Jim

Re: 49 ls1
 

Looking good sarge. Great job on the doors.

Re: 49 ls1
 

thanks 48Chev, and Jim

Here's some pics of the dash with some accessories mocked up. Starting to take shape!

Re: 49 ls1
 

Finally got that drivers side corner in today. Did a bunch of door gap fitting, and some smoothing on the back wall of the cab.

Re: 49 ls1
 

Chris, looking good...Jim

Re: 49 ls1
 

I don't know why my replacement cab corners never fit the damned door frame. The gap always gets too wide at the bottom. Wound up slicing it, and adding a slim wedge of 18ga. to get the door gap correct on the bottom.

Re: 49 ls1
 

Just seems that's the way with replacement panels, one was OK on drivers side, but pass side was crazy off...Jim

Re: 49 ls1
 

Thanks Jim. Yeah it's kinda hit-n-miss with the replacement panels. My passenger side lower cowl fit great, but the drivers was all out of whack.

Re: 49 ls1
 

Great job on the rust repair. Looking killer, love what you did with the dash too.