![]() |
Re: '64 chevy 2wd to 4wd
3 Attachment(s)
purist's are'nt going to like me.....:lol:
don't like that much glass....think the small looks better than the wrap... also sanded off the cameo trim from the cab & box Attachment 1389880Attachment 1389881 Attachment 1389882 |
Re: '64 chevy 2wd to 4wd
I think I it looks pretty good with a small window. It makes a good 4x4 too!!
|
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
thank you Dale!
dang super glue, had to CUT my ring finger off the frame....(dont want to screw up the frame now....:lol:) Attachment 1391304 '55 is standing on it's own, still quite a bit to do to the susp, but it's there. body on this aint the greatest. spent a couple hrs sanding the hood to get it sorta flush with the fenders, needs a little more i think. dont like the way the box & cab line up either, not the greatest. Attachment 1391301Attachment 1391302Attachment 1391303 chopped some of the front bulkhead off, brought it in a little closer.... Attachment 1391305 |
Re: '64 chevy 2wd to 4wd
Ouch......watch that super glue....lol. the bed looks better. As a whole it's looking great.
|
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
would you belive me if i told you i did it again? didn't take a pic, but was holding the t-case together & stuck it to my hand :dohh:
we finally caught some decent weather & been stacking the hrs, so a little slow on the cameo... still got some lines to run, steering gear & exhaust to make yet... Attachment 1395277Attachment 1395278 got the int done, all chrome blacked out, actually i lied, i'm going to leave part of the grille chrome, & the t-case lever is chrome, still working on the 454 (had to scratch another air cleaner...), the offending t-case... Attachment 1395279 dont like how the front of the box fenders are open, so i made a full bulkhead, primered up the body, couple minor touch-ups & hope to get some paint on it this weekend Attachment 1395280Attachment 1395281 |
Re: '64 chevy 2wd to 4wd
LOL....sounds like you and the glue are at war...the truck's looking great though. Keep it up.
|
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
yeah, i don't know Dale, going threw a spell-age maybe.....
you should see the floor under my bench, glad i got extra laminate....& when you spill it on your pants, they become stiff as steel...:lol: wife's paint i found did'nt pan out, thinned it right down & still thick & lumpy. i sprayed the int with it & it covered the door & window crank completely. i liked the color though, think it's called "nutmeg", so i left it there & glued some plastic over the cranks to kinda 3D them. the bench is a shortened & raised one from an impala Attachment 1396093 found this color (dont photo worth a darn) but it will work. the rear view is more the color....kinda....nutmeg... just dropped the body on the frame to check, made a stupid mistake & did'nt catch it, the 454 is longer & puts the fan right into the rad-going to have to figure something out without making a huge mess (1 step forward, 3 steps back.....) Attachment 1396091Attachment 1396092 and been searching hard for boxes for the crew, which will cost me an arm & a leg, but i did find this on the net, i can build it for free, fits my cheap theme, & i could build it like the picture for free (got lots of stocker stuff), but i blew my cheap theme all to heck & ordered a whack of swamps, axles, t-case's.....bout $60 worth so i can build a "ALPINE" off-road rollback, companion to Light Rescue 168.... Attachment 1396094Attachment 1396107 |
Re: '64 chevy 2wd to 4wd
I like the color, it has work truck feel to it. Truck looks tough. I like tow trucks, roll back would be cool.
|
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
yeah, it would be waaay cheaper (like free!) to do a rollback than get 2 shorties to make a LB.
managed to get out of my screw up. cut the rad out of the core & shoved it forward-works! yay, cause it's forward now, the hood dont close.... Attachment 1397022 heck with it, more modern rad for the BB anyways Attachment 1397023Attachment 1397024 just wanted to see how the body lines up.... Attachment 1397025Attachment 1397026 |
Re: '64 chevy 2wd to 4wd
3 Attachment(s)
chassis is almost there....
them bleeping exhaust pipes gave me a major headache...:cuss::censored::banghead: yeah, their strait with ONE bend, should be quick & easy-4 bleepin' hrs, & i dont know why, done way more twisted pipes faster......vette muffs Attachment 1397029Attachment 1397030 Attachment 1397032 |
Re: '64 chevy 2wd to 4wd
1 Attachment(s)
well my day got off to great start....
first thing this morning, a piece of metal tagged my thumb, felt it hit the bone.... should have went for stitches, but we were on the far side of Harrison lk, 'bout 40 mins to the walk-in, & we had a few passing showers, so i really could'nt comfortably go anyways with the roof half done.....plus i NEED the hrs.... i'm going to try finish the cameo, then take a break for a week or so. trying to build models with 1 thumb is like.....hmmmm, trying to pick your nose with your big toe :lol: Attachment 1397266 |
Re: '64 chevy 2wd to 4wd
man, i should have stayed in bed today....
attempted to one thumb the windows in the cameo, spilt thinner all over the windshield. wiped it off right away, but 10 mins later the old plastic started cracking up-bummer! so it's on indefinite hold till i can find a windshield. really hoping someone on my model forum comes threw....figures....:waah: |
Re: '64 chevy 2wd to 4wd
Ouch!!!! I suggest you let that heal up a bit. Does the bone feel like it's bruised? If so that takes a while to quit hurting. Not to be a smart acre or anything but that would have been a good candidate for the super glue to close it up....
|
Re: '64 chevy 2wd to 4wd
1 Attachment(s)
Quote:
notice to self-attach super glue holder to work belt.... and yeah, it stings, worst part is every time i bend my thumb-rriiiip!! but this hurts worse...:waah: Attachment 1397656 edit, more crap, in 15 mins on the way to the dentist to have my mouth ripped apart-yay! |
Re: '64 chevy 2wd to 4wd
Should of stayed in bed? Hell no, you should be hiding under a rock....:lol: On the bright side, maybe the dentist will give you pain meds that will help the thumb too. I hope you can find another windshield fairly easily. I guesstoday was feathers...
|
Re: '64 chevy 2wd to 4wd
3 Attachment(s)
hiding under a rock? heck, dam rock fell on me! :lol:
and oh yeah, dentist nailed me good, 2 cavaties. she shot me EIGHT times in the mouth, my lips were draggin' on the floor when i left there..... so to make myself feel better, i went & put 3 mos insurance on the crewcab, YAY! (just hope the cops dont bug me over a ripped ins. decal, yes it stuck to my finger & ripped in half...) Attachment 1398359 one good thing about getting sheet metal cuts on your hands, the cuts are clean & narrow (and usually deep) my tumb is closing up real nice, have a scar, but chicks-nope scratch that, my wife loves scars... cleared off my bench so nothings around me & started cutting up a rollback. this was as far as i got before i ran out of c-channel & tubing (which i went & got today...) Attachment 1398358 at least the int is free, this is what i got, i started cutting them apart last nite, but i'm really thinking just make a new int tub. i'm low on bench seats, so i'll prob cut out them molded ones & re-hash them Attachment 1398357 and the best news, buddy on the model forum has a '55 window YA-HOO! |
Re: '64 chevy 2wd to 4wd
Great news on the healing and windshield. You can crawl out from under the rock now....lol. Roll back bed is looking good. I've been driving my K30 crew the last couple of weeks, it's kinda cool.
|
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
yeah, i been walking softly lately Dale, was doing good till sat.
making bad choices again....:lol: decided to pick up a few extra hrs at work, went in on sat to fix one of the truck racks (good decision) things were going good till it came time to weld every thing up, SOMEONE "borrowed" my welding gloves & did'nt put them back. decided to use regular work gloves (bad decision....) as you can guess, a bunch of sparks went thru them in a tenth of a second, too bad it took me 10 seconds to start smelling "steak".... i gotta cut this out, turning this into a blood & gore thread....:lol: Attachment 1399655 but i still managed to get a start on the rollback... Attachment 1399635Attachment 1399637 Attachment 1399639Attachment 1399642 |
Re: '64 chevy 2wd to 4wd
2 Attachment(s)
here's what it looks like on the crew
after i get a cab floor in it & see where it will sit on the frame, i'll make a headache rack for the front of the deck, want it to be just a touch higher than the cab Attachment 1399656Attachment 1399657 |
Re: '64 chevy 2wd to 4wd
Safety First....LOL!!!! Good thing you have a good nose. Rollback looks awesome. You're right the headache rack should be a touch higher than the cab. That way the lightbar is visible from both ends. Are you going to fab a towbar/wheel lift for the back?
|
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
yes, i am Dale...
Attachment 1400523 tucked up under the frame... Attachment 1400524 extends & rotates, tire arms slide in & out.... Attachment 1400526 drops down to load.... Attachment 1400525 still got a lot to do, all rough right now, frame needs rivets, hyd. tank & lines, sideboxes..... Attachment 1400528 |
Re: '64 chevy 2wd to 4wd
Awesome!!!! It looks fantastic!!! Are you doing this from memory or a certain brand. It's looking a lot like a Jerr Dan, Century or Chevron to me.
|
Re: '64 chevy 2wd to 4wd
1 Attachment(s)
actually i was just trying to make it simple & this is what it's looking like.
looked at a few online, but i did'nt really pattern it off any one specific picture... hoping my swamps for it will be here next week. and seeing how it's a ROLLback, & i got this ford, just dawned on me to build it like a normal 4by that was rolled. flatten the roof a bit, busted glass, some dents, a flat tire so it's got a 3 legged dog lean.... Attachment 1400560 |
Re: '64 chevy 2wd to 4wd
It's looking fantastic, I think that's a good use for the Ford.
|
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
yup, it would be a good use for a ford!
ok, wow, when it rains it pours....needed a window for the '55.... found a local guy with a HUGE collection of models, some very rare & cool kits, old Jo-hans, tractor trailers, planes, fire engines..... snagged these 3 trucks for $35 another '55 (a stepper though) a '90 stepper, & a '59 elco. i have the '59 already, i tubbed & caged it, so you know where this one is going-up....:metal: also have the '90 already too, but i'm glad i got another one. i built mine to resemble my 1:1 '90 step, & was almost going to tear it down & rebuild it-higher....:metal: Attachment 1402856 also bought this box off him for $15.... Attachment 1402857 hmmm.... the '56 is basically just a shell, the 150 step is all there, but looks like a ford should....:lol: (maybe "roll" this one for the back of the rollback...) the ranchero is actually quite nice & well done-mite just leave this one alone- for now.... Attachment 1402861 this made the box worth it! another'55 cab, another nicely done '55, & a 454 SS with a monkey paint job, but it's all there (dont have a '88-'98 sb fleetside in the collection-& already a big block to boot) thinking of either turning the '55 into a suburban (ala napco), or seeing how i got all these cabs- a '55 crewy....:metal: Attachment 1402862 a bag of junk in the bottom, like them oxy-acytelene tanks... Attachment 1402863 he also has another box, chev dually (like the red one i just built), a '78 blazer, mike skinner goodwrench no. 3 truck, & a topless s-10 that he wants $15 for-i got a feeling i will be going over there later again....:lol: i'm going to snatch the windshield out of the green '55 for now so i can finish the cameo, i'll replace it with the window buddy is sending me. should have the cameo done pretty quick now.... |
All times are GMT -4. The time now is 07:13 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com