Re: Ratchet's Blazer - 1970 2wd with Original paint
4 Attachment(s)
I pulled the 79 Firebird 8.5" 10-bolt out from under my other truck and mounted the brake rotors and wheels up so that I can get some good "before" measurements. I couldn't help taking pictures because those 315-35-20's just look so damn meaty, and the 13" C6 Z51 rear rotors look small in those 20" wheels...
I love these wheels, especially with the dish that the centers have. |
Re: Ratchet's Blazer - 1970 2wd with Original paint
:metal:
|
Re: Ratchet's Blazer - 1970 2wd with Original paint
What are you doing for brake brackets? Just got my C5 rear calipers in the mail the other day
|
Re: Ratchet's Blazer - 1970 2wd with Original paint
3 Attachment(s)
I had ordered a Kore 3 setup (355mm Hybrid front and 330mm Z51 rear with parking brake) for a 79 firebird, which worked on the other truck since I used a 79 Z28 front subframe on it and this 79 firebird rear axle. That project is going to start over after the Blazer because I don't trust the connection of the subframe to the truck frame.
I am stealing the brake setup from that project, basically. After talking with Tobin @ Kore3, the tall-spindle setup that I have is the same as the C-10 setup with the exception of the hubs, since I have HD spindles for 1.25" rotors. If I changed spindles to the LD, I could have used everything just like your setup on your truck, but I would have to change tie-rods and ball-joints which has all just been replaced. It came out to be just barely more expensive to order some new hubs for the HD spindles, but with the 5x4.75" bolt pattern. The new hubs used to be a special order, but they had so many requests that they now stock them. The only problem is that I already powder-coated the calipers green which was going to work with that truck, but I don't think it will look good against the blue of the Blazer. I have a buddy that can strip them and re-powder them, but I have to decide which color... I'm thinking a darker silver/grey/titanium color or a blue, but I'm afraid that if the blue won't match exactly it will look funny. What do you think? |
Re: Ratchet's Blazer - 1970 2wd with Original paint
5 Attachment(s)
Here are my color options next to a picture that is closest to the real color of the Blazer out in the sun...
|
Re: Ratchet's Blazer - 1970 2wd with Original paint
Grey all day. Can’t see your last pic, for whatever reason...
Edit: what’s your plan for master cylinder? I’ve been contemplating this exact setup, curious to see how it works out for you. The stock rotors are cheap and plentiful and converting to 5x4.75 is almost a wash money-wise, if you’re already buying wheels. |
Re: Ratchet's Blazer - 1970 2wd with Original paint
I edited my last post... I was trying to be fancy and had built a .gif that cycled the color choices next to the pic of the Blazer.
|
Re: Ratchet's Blazer - 1970 2wd with Original paint
I don’t think the green would look all that bad. You can two tone some of the other parts of the truck as well.
Posted via Mobile Device |
Re: Ratchet's Blazer - 1970 2wd with Original paint
I’m somewhere between galaxy and speedway. Like a cast iron, but with flake.
|
Re: Ratchet's Blazer - 1970 2wd with Original paint
Quote:
Right now, I have a stock 72 style manual master cylinder for the factory disc/drum setup which would probably work fine if I replace the prop valve with an adjustable valve. Quote:
Quote:
|
Re: Ratchet's Blazer - 1970 2wd with Original paint
The Black that Brandi says will look good, or the Galaxy. I am not a big fan of the bright colors calipers my self. To me it distracts from the vehicle.
|
Re: Ratchet's Blazer - 1970 2wd with Original paint
3 Attachment(s)
Quote:
I just found this Graphite Charcoal which looks promising... |
Re: Ratchet's Blazer - 1970 2wd with Original paint
Funny, I was gonna say gloss black as a second option. Have you seen evo grey? It’s a prismatic color that I used on all of my PB stuff. Nice dark grey, that flops from near black to almost silver depending on lighting
|
Re: Ratchet's Blazer - 1970 2wd with Original paint
I went back and looked through your thread to see that color, and you are right, it does look good. It's so hard to pick a color based on pictures on the internet though. My wife may be right in the fact that I should just do gloss black and call it done. My powdercoater keeps gloss and 20% gloss black in stock ready to go, any other special color I want would have to be ordered.
|
Re: Ratchet's Blazer - 1970 2wd with Original paint
Well, I ordered swatches of all the colors listed on this page, to include the Evo Grey. If I don't like any of those, I'll just do the Gloss Black.
|
Re: Ratchet's Blazer - 1970 2wd with Original paint
5 Attachment(s)
I've done a lot of measuring for my rear axle, and it looks like I will end up with about 1/2" clearance between the tire and the inner wheel tub. Do you think that is enough? If not it looks like I am going to have to do the "Lucy" mod that n2billet did.
The powder swatches came in today! I've taken about 100 pics, but it is amazing how hard it is to get an accurate representation of the colors. I have my favorite already, but which one do y'all like? |
Re: Ratchet's Blazer - 1970 2wd with Original paint
Plan on “Lucy” modding mine, too.
I like 2, but I’m also partial to 6 ;) |
Re: Ratchet's Blazer - 1970 2wd with Original paint
Quote:
|
Re: Ratchet's Blazer - 1970 2wd with Original paint
Wow, the pictures really do mess with you...
|
2 or 6 would be my pick
Posted via Mobile Device |
Re: Ratchet's Blazer - 1970 2wd with Original paint
:agree
6 or 2 (or Brandi Black ;) ) |
Re: Ratchet's Blazer - 1970 2wd with Original paint
3 Attachment(s)
I was trying to NOT remove the original rear end until I had the new narrowed setup ready to go in, but I knew I would regret not pulling it before-hand if I didn't. Tonight I removed the rear axle and stuffed one of the back tires up in there, and am I ever glad that I did. My measurements that I was taking told me that I would have 1/2" clearance when aired out, but physically sticking the tire in there says that my math was wrong somewhere. It is touching on the inside and outside. Now I HAVE to do the "Lucy" mod that N2billet did on his bedsides. It's just a little more work, but as you can see in my pics, it will be well worth the trouble! :metal::metal::metal:
|
Re: Ratchet's Blazer - 1970 2wd with Original paint
God bless America!
|
Re: Ratchet's Blazer - 1970 2wd with Original paint
:metal: :metal: :metal:
|
Re: Ratchet's Blazer - 1970 2wd with Original paint
2 Attachment(s)
Quote:
I finally got a picture that is closest to what I actually see with my old eyes. |
All times are GMT -4. The time now is 02:40 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com