Re: Project "Schrum" 1959 Gmc 100
1 Attachment(s)
I'm looking to get another seat cover, I want something like this
Anyone know where I can find something similar? |
Re: Project "Schrum" 1959 Gmc 100
Is the center section a different color? Not sure if this was a factory option or a DIY job.
Rob |
Re: Project "Schrum" 1959 Gmc 100
Years and years of where people had their back
|
Re: Project "Schrum" 1959 Gmc 100
try a good auto upolstery shop - they should be able to match it or at least come close
|
Re: Project "Schrum" 1959 Gmc 100
why not get your truck running better and glass in all the openings before worrying about the upholstery?
fyi, the timing marks are on the front of the motor, not the flywheel |
Re: Project "Schrum" 1959 Gmc 100
Then why is there an opening in the bell housing? Mine is a Inline 6
I just wanted to get a clue on how to get something like that seat cover I'm currently getting my MGB running and going so I've put the truck off for a while but I should be back on it soon !!! |
Re: Project "Schrum" 1959 Gmc 100
Quote:
rotate the motor by hand until you see the mark and paint it white |
Re: Project "Schrum" 1959 Gmc 100
Its painted orange, I just can't see the timing marks. I believe mine is -5
|
Re: Project "Schrum" 1959 Gmc 100
What is a reasonable price for welding?
Both Steps Both Cab Corners Both Front Fender patch Both Door skins, bottoms Fabricating metal to fix the small rust holes around the speaker, cowl vent area |
Re: Project "Schrum" 1959 Gmc 100
The seat cover looks like an upholstery shop made it. Aftermarket guys have replacements you can install, or a local shop could make one using that as a pattern if its what you want.
Welding cost is subjective, best to get bids locally. I ended up doing all of mine because the best price I could get locally 10 years ago was $250 per patch panel (labor only), welded in and ready for final body work. that was for cab corners, eye brows, hinge pockets. I would expect steps and floors would be more because of the work to brace the cab and more fitment, making sure the doors align right, etc. The guy was basing it on $50 per hour shop rate. Other places would not do the piece work, they wanted the whole body work job. |
Re: Project "Schrum" 1959 Gmc 100
Well I'll see what I can do with this welding thing. I bought a Lower bottom Door skin yesterday and next time I am going to buy a the right door skin and a hinge pocket
|
Re: Project "Schrum" 1959 Gmc 100
1 Attachment(s)
The tailgate has been sandblasted and is getting ready to be painted
The letters will be painted white |
Re: Project "Schrum" 1959 Gmc 100
1 Attachment(s)
Early Christmas present for me
Stainless Steel tailgate chains Tailgate Chain covers Tailgate Hinges Soon to also be the tailgate repainted and other two rims done |
Re: Project "Schrum" 1959 Gmc 100
Nice.
Kim |
Re: Project "Schrum" 1959 Gmc 100
Shiney! I always used old bike inner tubes for the chain covers. If they do not have it put a small hole at the bottom of the bend to drain off water and condenstation.
|
Re: Project "Schrum" 1959 Gmc 100
The center of the filler cap on the plastic boat tank should have a little knob. Loosen it and the knob unthreads from the cap, which opens the vent for the tank. That should fix your pulling a vaccum in the tank issue. I've got a lot of vehicles running on boat tanks.
Ogre, you really shouldn't keep giving ignition advise if you're not familiar with the straight six's. The whole distributor body is rotated by the vacuum advance, so the cap and wires twist with it as the vacuum advance moves it around. That's normal in this case. It's not like a distributor body held down with a clamp bolt and only the breaker plate being moved by the vacuum advance, the whole distributor is being moved to accomplish the same thing. |
Re: Project "Schrum" 1959 Gmc 100
I've messed up the Timing on the truck by removing the spark plug wires to help set the Distributor where it needs to be according to other truck owners of the GMC 270 engine I'll figure something out sooner or later, the tail gate is still in the shop getting fixed so I hope it will be done this week sometime
|
Re: Project "Schrum" 1959 Gmc 100
1 Attachment(s)
Uncovered more rust under fiberglass
|
Re: Project "Schrum" 1959 Gmc 100
That sucks.
Kim |
Re: Project "Schrum" 1959 Gmc 100
If its there check the front eyebrow above the windshield and A pillars where there meet the top, usually ones leads to the other. Good news is the inner and outer cab pieces are repoped. Go back thru your earlier posts, I remember guys giving you the instructions on how to R&R and wire the distributor.
|
Re: Project "Schrum" 1959 Gmc 100
No clue how it gets to this point...mice or what...Mind boggling
I've wired the distributor, just no clue on how to set the timing and where it needs to be, it won't go there and if it does it pops and spits |
Re: Project "Schrum" 1959 Gmc 100
I subscibe to this thread....Sp
|
Re: Project "Schrum" 1959 Gmc 100
4 Attachment(s)
I recently got my Grandfathers '74 Volkswagen Beetle back from a neighbor. So until I pay my Grandmother off for the bug I will continue my projec
Thanks |
Re: Project "Schrum" 1959 Gmc 100
Nice bug.
Kim |
Re: Project "Schrum" 1959 Gmc 100
Thanks Kim
|
All times are GMT -4. The time now is 11:38 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com