Re: post latest 1/4 and 1/8 mile times and 60ft.
. Very nice 60 foot 330 is moving But the MPH should be in the 91-94 mph not 69. MPH is very low for that run.
Here is my truck run best to date. Have new stuff to try.. like both kits on line with a full bottle HA HA . and the new convertor.. That was not a great 60 footer street cars drving through the water box. .020 reaction 1.69 60 foot 4.76 330 7.308 1/8 mile and 98.19 MPH |
Re: post latest 1/4 and 1/8 mile times and 60ft.
It was 90mph that pass is on a 75shot spraying off the line
|
Re: post latest 1/4 and 1/8 mile times and 60ft.
3 Attachment(s)
Been working on a new combo. Dart 308 iron eagle heads ported. Victor jr. Hp1000. Lunati voodoo 60234 solid roller. 255/263 .680/.680 110. We swapped in 4.56 gears. Truck has a 30" drag radial on it. Carb still needs some work but here is the current best
|
Re: post latest 1/4 and 1/8 mile times and 60ft.
Don't laugh at my sad times but it was with an open rear end my first night testing with new motor. 15.02 at 98.8 mph in the 1/4. Tried as hard as I could but it was all smoke until about the 330ft line
|
Re: post latest 1/4 and 1/8 mile times and 60ft.
1 Attachment(s)
my new best, left side
|
Re: post latest 1/4 and 1/8 mile times and 60ft.
Looks like a great run.. MPH is lower than most for that ET.. I ran a 7.3 at 98... WHat gear do you have?
|
Re: post latest 1/4 and 1/8 mile times and 60ft.
thanks, i'm running a 4.10
|
Re: post latest 1/4 and 1/8 mile times and 60ft.
|
Re: post latest 1/4 and 1/8 mile times and 60ft.
[QUOTE=flamingbig10;6806926]http://i147.photobucket.com/albums/r...ps3cb433bc.jpg
125 shot off the line[/QUOTE are you still running a truck 12 bolt? |
Re: post latest 1/4 and 1/8 mile times and 60ft.
Yes with 373 and a girdle cover
|
Re: post latest 1/4 and 1/8 mile times and 60ft.
1 Attachment(s)
finally broke into the 6,s last night, cant understand why my mph isn't picking up though, any ideas? my time is the one on the left. best 60 foot ever:metal:
|
Re: post latest 1/4 and 1/8 mile times and 60ft.
Here's my best all around so far. Something still not just right.
.883 RT (took a little nap) 1.908 60ft. 8.047 594ft. 8.602 1/8th 80.94 mph 69 swb 454 + .30 ZZ502 roller cam, roller rockers etc. mallory distr. 3.73 eaton posi 12 bolt. 295/65 15 MT drag radials. TH 350 w/ 2200-2500 stall (I suspect this may be alittle tight should be higher) |
Re: post latest 1/4 and 1/8 mile times and 60ft.
125 shot sprayed at the 60 ft it was about a 100 out during the day
http://i147.photobucket.com/albums/r...ps2870c073.jpg |
Re: post latest 1/4 and 1/8 mile times and 60ft.
flamingbig10, are you on slicks or drag radials?
|
Re: post latest 1/4 and 1/8 mile times and 60ft.
e/t street drag radials 295/55/15
|
Re: post latest 1/4 and 1/8 mile times and 60ft.
wish i could get a tire with that big of a foot print under mine, on a good day (not a 100 degrees) do you hook good, if you do what air pressure are you running and what kind of a burnout do you do? hope I'm asking to many questions, just trying to get these radial figured out.
|
Re: post latest 1/4 and 1/8 mile times and 60ft.
Flip,
What radial do you have? What size wheel? What pressure you running? What about shocks and springs? |
Re: post latest 1/4 and 1/8 mile times and 60ft.
Quote:
|
Re: post latest 1/4 and 1/8 mile times and 60ft.
It hook decent on a prepped track I dead hooked on a 125 shot, 18 psi, a small burn out seams like it works
|
Re: post latest 1/4 and 1/8 mile times and 60ft.
Just ran this past thursday to get a baseline with my new gears and before i put on my new cnc ported afr 210s and port matched super victor
r/t .122 60' 1.79 330' 5.172 1/8 8.02 mph 85.62 1000 10.51 1/4 12.642 mph 105.85 |
Re: post latest 1/4 and 1/8 mile times and 60ft.
2 Attachment(s)
I've got some more tuning to do, but this was the first time out to test and tune. 30 over 454, Comp cams extreme energy xe-268, Performer intake, Q-Jet, Headman full length headers, 700r4, Cal-Tracs, 3.42 10 bolt, with a gov-loc, running on Cooper street tires 275/60-15's. Car number 51, all three right columns, ignore the first column its the other guys.
|
Re: post latest 1/4 and 1/8 mile times and 60ft.
|
Re: post latest 1/4 and 1/8 mile times and 60ft.
4 Attachment(s)
Ran a 6.86@103mph last time at the track...
|
Re: post latest 1/4 and 1/8 mile times and 60ft.
1 Attachment(s)
150 shot nitrous outlet stinger on a digiset. New cam and converter for this year. Progressive and electric water pump next
|
Re: post latest 1/4 and 1/8 mile times and 60ft.
Posted via Mobile Device
New fastest ET this Saturday 60'-1.565 1/8-7.182 1/4-11.383 MPH-115.47 |
All times are GMT -4. The time now is 04:09 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com