|
Re: The '67 Burb Build Thread
1 Attachment(s)
Quote:
Attachment 690653 |
Re: The '67 Burb Build Thread
3 Attachment(s)
bought some body filler (the better cheap crap from autozone) so i can start doing the body work on my replacement fender, bought a few more tools to and stuff to use to work on it with, bought some electrical stuff, bought my push starter button, drilled the mounting hole and installed it, just need to wire it up. i decided to go with the blue cover instead of the red or clear that it came with, i just wish it lit up, but oh well what do you expect for $30 :lol:. i also started doing some more wiring repair under the dash, should have done that when it was out because it would have been alot less hassle, oh well live and learn haha. i also added the headlight and wiper switch connectors back on (sorry no pics of that) as i decided to run the stock switches again.
Attachment 691496 Attachment 691497 Attachment 691498 |
Re: The '67 Burb Build Thread
3 Attachment(s)
got some more fittings and line for the rear bags, relocated the ignition switch to the inside of my center console, extended the wiring for the ignition and wired up the starter button. all wiring is done under dash for now except for the gauges which i can do from the front of the dash where the cluster goes. :metal: also took a pic of my mirror cover just because
Attachment 692060 Attachment 692061 Attachment 692062 |
Re: The '67 Burb Build Thread
wow!
|
Re: The '67 Burb Build Thread
wow what lol?
|
Re: The '67 Burb Build Thread
2 Attachment(s)
no pic of it, but i recieved my porterbuilt panhard bar yesterday, also got my front fender skim coated and sanded down and in filler primer. still have a few small spots to touch up, but its almost done
Attachment 693111 Attachment 693112 |
Re: The '67 Burb Build Thread
lookin good man..
what did you do with your heater hoses after you blocked off the firewall? Posted via Mobile Device |
Re: The '67 Burb Build Thread
what heater hoses? i never had any on it to begin with lol.
|
Re: The '67 Burb Build Thread
i seen this in the wha did you do to your truck thread an commented....
|
Re: The '67 Burb Build Thread
5 Attachment(s)
opened up my porterbuilt panhard bar the man in brown dropped off yesterday. all i got to say is beautiful welds and excellent quality products
Attachment 693558 Attachment 693559 Attachment 693560 Attachment 693561 Attachment 693562 |
Re: The '67 Burb Build Thread
man that looks good! i shouldve went that route with mine..wish you could leave it raw just to show how nice they look original.
im really digging that push button start...have you tried it out yet? |
Re: The '67 Burb Build Thread
haha i know right. yah, i bumped it over but didn't start it up because i have my hood sitting behind my burb, and dont want two black spots on my hood lol. but it woorks good.
|
Re: The '67 Burb Build Thread
2 Attachment(s)
finished grinding down the plate that i cut out to box my lower arms in with, and picked this up for $10 to replace the one in my burb, and yes i know it is for a 67-68 gmc and it is in better shape than mine minus the part where the hood pin thing goes in the center but i will remove that from mine and install it on that one, will probably also gut the handle and move it over or use part of the one from the one it is replacing so that it is not offset
Attachment 694124 Attachment 694125 |
Re: The '67 Burb Build Thread
started the install of my porterbuilt panhard bar, almost done, just need to paint and install the bar
|
Re: The '67 Burb Build Thread
3 Attachment(s)
finished installing the pb panhard bar:metal:, just need to adjust it. also removed the rear lower bag mount and cut out the cross bar that i had put in it that wasnt strong enough and was bent. will be replacing that with some dom tubing.
Attachment 695423 Attachment 695424 Attachment 695425 |
Re: The '67 Burb Build Thread
it must be a pain to jack up somthin this low
|
Re: The '67 Burb Build Thread
lol. if the suspension is aired up it isnt a problem, but this time it was because my dads little compressor took a dump, and it was sitting on the ground. good thing i have no floor in the back haha. but still was a pain in the a$$, and took forever. had to use 2 bottle jacks and some 2x4's just to get it high enough to get the floor jack under it from the side as i couldnt get to the back of it either.
|
Re: The '67 Burb Build Thread
dayum!
|
Re: The '67 Burb Build Thread
hahaha thats what i said when the compressor took a dump. guess i need to invest in a good portable one or something for now lol.
|
Re: The '67 Burb Build Thread
:lol:
|
Re: The '67 Burb Build Thread
try jacking the truck up when its dumped, with flat tires, and in the grass! talk about a pita!!
|
Re: The '67 Burb Build Thread
haha no thanks, but at least you can get to the back lol.
|
Re: The '67 Burb Build Thread
ņo offense at all but this is one reason why i am glad my six seven isnt lowered.....:lol: all though i might end up lowering it a little.....time will tell.....
|
Re: The '67 Burb Build Thread
haha its ok, the only reason why i had such a hard time is because i couldnt get to the back lol.
|
Re: The '67 Burb Build Thread
4 Attachment(s)
adjusted the pb panhard bar and threw a quick crappy paint job on my glove box door will redo it better later. and took a couple of pics of the clearance of the pb bar and brackets just perfect lol. and also took a pic of the part of the rear brake line that i can see from underneath.
Attachment 695923 Attachment 695924 Attachment 695925 Attachment 695926 |
| All times are GMT -4. The time now is 05:08 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com