Re: 1965 chevy truck one piece @a time
Did you get the power steering box also even though they cut the pitman arm?
|
Re: 1965 chevy truck one piece @a time
No he didn't have the power steering but had the rest but will see it the drum brake will work not ready to really get to wraped up in the 64 just yet
need to finish getting the 65 before really gettin nasty with the red truck but might need a couple of brackets again like the power steering bracket and power brake booster if and when i start the build :lol::metal: |
Re: 1965 chevy truck one piece @a time
4 Attachment(s)
Things that other people do why paint over the mirror bases why not paint the door completly
|
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
not much going on its finally quit raining for once but I did find a upgrade for the red truck if its not to messed up
292 out of an 1980 c-10 started removing a motor mounts and other stuff i found out it is an remaned block or a replacement block from Mexico really can't find out much on the web and if its a good block to hop up. numbers are 93411147 |
Re: 1965 chevy truck one piece @a time
3 Attachment(s)
also rebuilt the mono jet for the 250 in the 64 and put it back on so i can get it out of the shop so i can get the 65 back in there for putting the doors and hood back on ..
and the number 7489 is under side of the hood on the drivers side any idea what it could mean ??? |
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
cleaned up the thermastat housing and panted it going replacing the gaskets and
a little paint |
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
the valve cover is next need to go over to pops to use his bead blaster to strip the valve cover won't fit in mine .and if you can tell major shop reconstruction is in full progress the pic with the painted housing the drive way is gone
|
Re: 1965 chevy truck one piece @a time
3 Attachment(s)
before and now what the drive way looks like ATTACH]1760282[/ATTACH]
Attachment 1760283 Attachment 1760284 |
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
after 13 months the 65 is back in the shop ... the shops to the point now i can
start working again it took alll summer to take the old building down after the new one went up |
Re: 1965 chevy truck one piece @a time
3 Attachment(s)
iits a far cry from the old shop to the new one with room :metal:
|
Re: 1965 chevy truck one piece @a time
I have been following your progress.
Starting to really take shape. Looking good. |
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
spent little time on the 1964 up grading the carb to i can get in moving under its own power
|
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
and also blasted and painted the head light mounts for the aluminum grill
for the 65 step had one chromed and its not fitting right so i'm going to use the aluminum one that is being restored |
5 Attachment(s)
spent a little time on red today notices the rear mounts done red neck style from the po and one wasn't bolted in
so i went head and replaced them with the right bolts and rubber mounts Posted via Mobile Device |
Re: 1965 chevy truck one piece @a time
4 Attachment(s)
[QUOTE]Also got the rest of the fuel lines and fuel pump on the motor also
looks like i need to get a vacuum fitting for the carb for the dist. Posted via Mobile Device |
5 Attachment(s)
Quote:
|
Re: 1965 chevy truck one piece @a time
Any updates/pictures?
|
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
its been a while but the wait it over here s a few of what s been going on
couple of the pics are from last fall and the rest are from the last couple of months |
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
more pics part two little more body work and paint prep
on the slow build that should have been done before now :waah: |
Re: 1965 chevy truck one piece @a time
2 Attachment(s)
Attachment 2189109
Attachment 2189110few more of part three :exit: and the next part of the build putting it the rest away together with out messing up the paint |
Re: 1965 chevy truck one piece @a time
Looking great.
Beautiful Blue. Thanks for the progress update. |
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
Thanks its a black sapphire that's a dark blue and at night it looks blk
|
Re: 1965 chevy truck one piece @a time
Very pretty, great colour.
|
Re: 1965 chevy truck one piece @a time
Yes, great color.
And you widening those rear fenders really turned out good. They line up better with the width of the cab. I'm glad to see you posting again. I was a follower of your build. |
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
here is the latest update on the pick up almost ready
|
Re: 1965 chevy truck one piece @a time
1 Attachment(s)
a few more pics of the truck and the sanding and staining the wood
its heading back to paint shop next week for fixing minor spots in the paint and one more color sand and buffing then home to put the wood in :chevy: |
Re: 1965 chevy truck one piece @a time
Wow. This is a fantastic looking truck!
|
Re: 1965 chevy truck one piece @a time
4 Attachment(s)
here is a couple more of whats under the truck and the stain on the wood
|
Re: 1965 chevy truck one piece @a time
Agree with everyone so far, that is a beautiful color and also not one that you see too often. If you don't mind me asking is it a stock color for another vehicle or a custom 1 off?
Don't feel bad about a long build, it's depressing to say this myself but my truck has been sitting for years now :waah: . I started with the plan to collect all the major pieces before starting my build and ended up getting a good bit of them, then had knee surgery.... and then back surgery...and another back surgery...oh and another back surgery :waah: (I'm going to have my own orchestra if I keep this up) I don't want to turn into one of those "I'm going to fix it up someday" people with it like rotting away but it keeps getting pushed back...and back... |
Re: 1965 chevy truck one piece @a time
How come your bed wood isnt all straight?
|
Re: 1965 chevy truck one piece @a time
I'm going to guess wheel tubs in bed lol
|
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
here is a couple of pics of the sanding of the wood for the bed and the tubs for it the stain was a little t dark do to me staining the under side with out rasing it off the plastic and soaked the wood on the underside . :waah:
The wheel and tires on the back are 15x12 with a 8 3/4 back spacing with 31x16x15 tires on the rear |
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
little wood working added the polyurathane to the top of the wood
waiting for it to dry coat and then flip it over and do the underside. finish up the wood while the truck at paint for touch ups and final color sand and buffing the top two pics are after the first coat and the second three are after the 3rd coat of polyurathane :chevy: |
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
little update to the 65 . I got to finally get to drive the truck for the first time on the road today .. still have some small things to do the truck
but it was nice to get it home . i drove the long way home going red light to red light stayed off the freeway it was bumper to bumper rush hour . but it was staying around 190 still have so radiator cowling to put on and the wood for the bed and the cab corners and new tires the micky thompsons are 9 years old :lol: |
Re: 1965 chevy truck one piece @a time
That's awesome. Glad you got to get behind the wheel...that's got to be a good feeling.
|
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
just a little update its been a while got new wheels and tires on the truck
just to make a one step forward just to go three steps back . |
Re: 1965 chevy truck one piece @a time
After mounting the new wheels and tires i found out the rear tires are 8-1/2
back spaced and the rally wheels are 9 inch back spacing making a clearance problem so we have had to change the rear end out to make the right off set to work |
Re: 1965 chevy truck one piece @a time
2 Attachment(s)
before with ralleys and after with out
|
Re: 1965 chevy truck one piece @a time
Mean looking truck with that stance and tires in the back. Looks good!
|
Re: 1965 chevy truck one piece @a time
4 Attachment(s)
Just little update went to the tire shop and had some
M&H cheater slicks or Drag Radials put on the rally wheels on the back their 390x45x15 on 15x12x9 inch back spacing and redoing the bed wood again i goofed and used water base and should have used oil base so redoing it should have the under side done tonite let it sit for 36 plus hours then do the top side friday :chevy: |
All times are GMT -4. The time now is 12:39 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com